Planet

navi

home

PPS

about

screenshots

download

development

forum

Context Navigation

source: data/media/levels/CuboidSpaceStation2.3.lua @ 5310

Last change on this file since 5310 was 5310, checked in by mkaiser, 15 years ago
Some changes.
File size: 34.0 KB

Line
1	-- This lua script creates a totally random generated space station for the orxonox computer game!
2
3
4
5	-- This function creates a randomly generated space station.
6	-- The first argument ranSeed, must be false, or a positive Integer, if it is false your space station is always chosen randomly, if you give an integer,
7	-- your space station will be generated randomly, but once you have the space station it will be the same.
8	-- The argument xLen defines how large the space station will be into the x-direction.
9	-- The argument xVar defines how much the space station will vary at the ends in x-direction, this is so that the station is no cube.
10	-- The argument yLen is the same as xLen, but for the y-direction.
11	-- The argument yVar is the same as xLen, but for the y-direction.
12	-- The argument zLen is the same as xLen, but for the z-direction.
13	-- The argument zVar is the same as xLen, but for the z-direction.
14	-- The argument givenScale scales the station proportionally in all directions.
15	function createSpaceStationPar(ranSeed, xLen, xVar, yLen, yVar, zLen, zVar, givenScale)
16
17
18
19	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
20	-- This prints xml code, which creates a MovableEntity, which I need to attach all the parts of the space station.
21	print("<MovableEntity scale=1 position=\"0,0,0\" >")
22	-- End create Movable Entity.
23	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
24
25
26
27	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
28	-- Create a randomseed, so that the math.random() function is actually random.
29	if ranSeed == false then
30	math.randomseed(os.time())
31	else
32	math.randomseed(ranSeed)
33	end
34	-- End create randomseed.
35	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
36
37
38
39	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
40	-- Here you can define some global variables, with which you can modify the space station.
41
42	-- Define the maximal size of the space station, this is actually just for the grid, be sure that this value is big enough.
43	sSSize=30
44
45	--if xLen>=yLen and xLen>=zLen then
46	-- sSSize=xLen+20
47	--elseif yLen>=xLen and yLen>=zLen then
48	-- sSSize=yLen+20
49	--elseif zLen>=xLen and zLen>=yLen then
50	-- sSSize=zLen+20
51	--end
52
53	-- Define how many parts the space station has, this value has to be exact, so be sure to increment it if you're adding a new part.
54	sSParts=9
55	-- Define how many body parts the space station has, this value has to be exact. Body part means a part, which has connections at least in two directions.
56	sSBodyParts=3
57	-- Define how many side parts for the left side you have.
58	leftSideParts=1
59	-- Define how many side parts for the right side you have.
60	rightSideParts=1
61	-- Define how many top parts you have.
62	topParts=2
63	-- Define how many connection parts you have.
64	connParts=1
65	-- Define the maximal dimension of a single part, be sure this value is big enough, better it's too big, it's only a matter of efficiency.
66	pDim=6
67	-- Define the length in x-direction of the space station which will be occupied by bodyparts.
68	xBPLength=xLen
69	-- Define the variation of the edges of your bodyparts in the x-direction.
70	xBPVar=xVar
71	-- Define the length in y-direction of the space station which will be occupied by bodyparts.
72	yBPLength=yLen
73	-- Define the variation of the edges of your bodyparts in the y-direction.
74	yBPVar=yVar
75	-- Define the length in the z-direction of the space station which will be occupied by bodyparts.
76	zBPLength=zLen
77	-- Define the variation of the edges of your bodyparts in the z-direction.
78	zBPVar=zVar
79	-- Define the scale of the space station.
80	sSScale=givenScale
81	-- Define the griddimension, be sure this value matches the size of a single space station part plus the size of a connection part, which means your parts must be:
82	-- integer*(gridDim-connectionSize), then integer tells you how many griddimensions your part is.
83	gridDim=2.25
84	-- End define global parameters.
85	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
86
87
88
89	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
90	-- This creates a 4-dimensional grid, which tells us if there is a part or not, and in which direction it has connections.
91	-- The parameters x,y,z are the axis of the space station, which iterate to sSSize, the maximal size of the space station.
92	-- The griddimension, this word I will use later, means that the distance of a point to the next point is gridDim in the game, so the absolute x-axis is xgridDimsSScale,
93	-- and so on for the other dimensions y and z.
94	-- grid[x][y][z][0] contains 0 if there is no part at the position (x,y,z), otherwise 1.
95	-- grid[x][y][z][1] contains 0 if there is no connection from (x,y,z) in x-direction, "+" if there is one in the positive x-direction,
96	-- "-" if there is one in the negative x-direction, "+-" if there are in both x-directions.
97	-- grid[x][y][z][2] contains 0 if there is no connection from (x,y,z) in y-direction, "+" if there is one in the positive y-direction,
98	-- "-" if there is one in the negative y-direction, "+-" if there are in both y-directions.
99	-- grid[x][y][z][3] contains 0 if there is no connection from (x,y,z) in z-direction, "+" if there is one in the positive z-direction,
100	-- "-" if there is one in the negative z-direction, "+-" if there are in both z-directions.
101	grid = {}
102	for x=-math.floor(sSSize/2),math.floor(sSSize/2) do
103	grid[x] = {}
104	for y=-math.floor(sSSize/2),math.floor(sSSize/2) do
105	grid[x][y]= {}
106	for z=-math.floor(sSSize/2),math.floor(sSSize/2) do
107	grid[x][y][z]={}
108	for i=0,3 do
109	grid[x][y][z][i]=0
110	end
111	end
112	end
113	end
114	-- End create 4-dim grid.
115	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
116
117
118
119	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
120	-- This creates an array which stores all the parts, it's size is depending on the global values pDim and sSParts.
121	-- The first parameter i, tells us how many parts fit into the array, so it iterates from 1 to sSParts, each part has his own value i.
122	-- The second, third and fourth parameters are the relative coordinates of the part, you have to start at (0,0,0) and be sure you fill the array into the right direction.
123	-- A short example: your part is 2 griddimensions long and you place it in the game, that the relative coordinate point is at (0,0,0) and the part lies in the positive
124	-- z-axis, then you have to use the coordinate point (0,0,1).
125	-- The fifth parameter is an array with size 4, at index=0, you have to set 1 if your part covers the gridpoint at (x,y,z), otherwise 0.
126	-- At index=1,2,3 you define the possible connection directions (1 for x, 2 for y and 3 for z), be sure to use the notation from above (0, "+-", "+", "-").
127	bodyParts={}
128	for i=1,sSParts do
129	bodyParts[i]={}
130	for x=-math.floor(pDim/2),math.floor(pDim/2) do
131	bodyParts[i][x]={}
132	for y=-math.floor(pDim/2),math.floor(pDim/2) do
133	bodyParts[i][x][y]={}
134	for z=-math.floor(pDim/2),math.floor(pDim/2) do
135	bodyParts[i][x][y][z]={}
136	for k=0,3 do
137	bodyParts[i][x][y][z][k]=0
138	end
139	end
140	end
141	end
142	-- This contains the name of the mesh file.
143	bodyParts[i][0][0][0][4]=""
144	-- This contains the first possible rotation of your part, pitch=... yaw=... roll=... .
145	bodyParts[i][0][0][0][5]=""
146	-- This contains the second possible rotation of your part, pitch=... yaw=... roll=... .
147	bodyParts[i][0][0][0][6]=""
148	-- This contains the third possible rotation of your part, pitch=... yaw=... roll=... .
149	bodyParts[i][0][0][0][7]=""
150	-- Contains the movement rotation, rotationaxis=... rotationrate=... .
151	bodyParts[i][0][0][0][8]=""
152	-- Contains the attachment, if your part has an attachment, e.g. <ParticleEmitter .../>.
153	bodyParts[i][0][0][0][9]=""
154	end
155	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
156
157
158
159	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
160	-- Here you can add a part to the space station, there are some examples here and how to describe your part is written above in the commentary.
161
162	-- The part must be inserted so, that the center of reference is at position (0,0,0).
163	-- At position bodyParts[i][0][0][0][4] you have to put the mesh name of your part.
164	-- At bodyParts[i][0][0][0][5] you can rotate your part, with pitch=angle, yaw=angle or roll=angle (x,y or z). Positive angle means in screw direction.
165	-- At bodyParts[i][0][0][0][6] you have another possibility to rotate your part in a different way, e.g. for left and right side parts.
166	-- At bodyParts[i][0][0][0][7] you have a third possibility to rotate your part, e.g. connection parts must be rotated into 3 different ways.
167	-- At bodyParts[i][0][0][0][8] you can rotate your part around his own axis, with rotationaxis="x,y,z" rotationrate=number.
168	-- At bodyParts[i][0][0][0][9] you can attach something to your model, e.g. <ParticleEmitter .../>.
169
170	-- Insert the CuboidBody, which is only one griddimension and can have connections in every direction.
171	bodyParts[1][0][0][0][4]="CuboidBody.mesh"
172
173	bodyParts[1][0][0][0][0]=1
174	bodyParts[1][0][0][0][1]="+-"
175	bodyParts[1][0][0][0][2]="+-"
176	bodyParts[1][0][0][0][3]="+-"
177	-- End insert CuboidBody.
178
179	-- Insert the DoubleCuboidBody, which is two griddimensions long, and one wide and high and can have connections in every direction except in the middle.
180	bodyParts[2][0][0][0][4]="DoubleCuboidBody.mesh"
181	bodyParts[2][0][0][0][5]="pitch=-90"
182
183	bodyParts[2][0][0][0][0]=1
184	bodyParts[2][0][0][0][1]="+-"
185	bodyParts[2][0][0][0][2]="+-"
186	bodyParts[2][0][0][0][3]="-"
187
188	bodyParts[2][0][0][1][0]=1
189	bodyParts[2][0][0][1][1]="+-"
190	bodyParts[2][0][0][1][2]="+-"
191	bodyParts[2][0][0][1][3]="+"
192	-- End insert DoubleCuboidBody.
193
194	-- Insert the CuboidConnectionBody, it is three griddimensions long and one wide and high and can have only connections at griddimension 1
195	-- (except the side in direction of griddimension 2) and griddimension 3 (except the side in direction of griddimension 2).
196	bodyParts[3][0][0][0][4]="CuboidConnectionBody.mesh"
197	bodyParts[3][0][0][0][5]="pitch=-90"
198
199	bodyParts[3][0][0][0][0]=1
200	bodyParts[3][0][0][0][1]="+-"
201	bodyParts[3][0][0][0][2]="+-"
202	bodyParts[3][0][0][0][3]="-"
203
204	bodyParts[3][0][0][1][0]=1
205
206	bodyParts[3][0][0][2][0]=1
207	bodyParts[3][0][0][2][1]="+-"
208	bodyParts[3][0][0][2][2]="+-"
209	bodyParts[3][0][0][2][3]="+"
210	-- End insert CuboidConnectionBody.
211	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
212
213	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
214	-- Insert the Thruster, which is one griddimension long, wide and high, it can only have a connection into the negative z-direction.
215	-- If you're space station has no thrusters, be sure to set thrusterIndex=false, but maybe you can use this also for other parts,
216	-- see section Attach thrusters to learn how thrusers are attached at your space station.
217	thrusterIndex=4
218	bodyParts[thrusterIndex][0][0][0][4]="Thruster.mesh"
219	bodyParts[thrusterIndex][0][0][0][5]="pitch=-90"
220	bodyParts[thrusterIndex][0][0][0][9]="<ParticleEmitter position=\"0,0,0\" source=\"Orxonox/fire3\" />"
221
222	bodyParts[thrusterIndex][0][0][0][0]=1
223	bodyParts[thrusterIndex][0][0][0][3]="-"
224	--End insert the Thruster.
225	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
226
227	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
228	-- Insert the Cockpit. If your space station has no cockpit, be sure to set cockpitIndex=false.
229	-- The Cockpit is 3 x-griddimensions long, 3 y-griddimensions and 2 z-griddimensions, it can only have a connection in the positive z-direction.
230	cockpitIndex=5
231	bodyParts[cockpitIndex][0][0][0][4]="SemiCircleCockpit.mesh"
232	bodyParts[cockpitIndex][0][0][0][5]="pitch=-90 yaw=180"
233
234	bodyParts[cockpitIndex][0][0][0][0]=1
235	bodyParts[cockpitIndex][0][0][0][3]="+"
236
237	bodyParts[cockpitIndex][-1][0][0][0]=1
238	bodyParts[cockpitIndex][1][0][0][0]=1
239	bodyParts[cockpitIndex][0][-1][0][0]=1
240	bodyParts[cockpitIndex][0][1][0][0]=1
241	bodyParts[cockpitIndex][-1][-1][0][0]=1
242	bodyParts[cockpitIndex][1][-1][0][0]=1
243	bodyParts[cockpitIndex][-1][1][0][0]=1
244	bodyParts[cockpitIndex][1][1][0][0]=1
245	bodyParts[cockpitIndex][0][0][-1][0]=1
246	bodyParts[cockpitIndex][-1][0][-1][0]=1
247	bodyParts[cockpitIndex][1][0][-1][0]=1
248	bodyParts[cockpitIndex][0][-1][-1][0]=1
249	bodyParts[cockpitIndex][0][1][-1][0]=1
250	bodyParts[cockpitIndex][-1][-1][-1][0]=1
251	bodyParts[cockpitIndex][1][-1][-1][0]=1
252	bodyParts[cockpitIndex][-1][1][-1][0]=1
253	bodyParts[cockpitIndex][1][1][-1][0]=1
254	-- End insert Cockpit.
255	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
256
257	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
258	-- Insert the side parts.
259	-- If your space station has no left side parts, be sure to set leftsidePartsIndex[0]=false.
260	-- If your space station has no right side parts, be sure to set rightsidePartsIndex[0]=false.
261	leftSidePartsIndex={}
262	leftSidePartsIndex[0]=""
263	rightSidePartsIndex={}
264	rightSidePartsIndex[0]=""
265
266	-- Insert the solar panel, which i wanna use as left and right side part.
267	leftSidePartsIndex[1]=6
268	rightSidePartsIndex[1]=leftSidePartsIndex[1]
269	bodyParts[leftSidePartsIndex[1]][0][0][0][4]="SolarPanel.mesh"
270	bodyParts[leftSidePartsIndex[1]][0][0][0][5]="roll=90 pitch="..math.random(0,180)
271	bodyParts[rightSidePartsIndex[1]][0][0][0][6]="roll=-90 pitch="..math.random(0,180)
272	bodyParts[rightSidePartsIndex[1]][0][0][0][8]="rotationaxis=\"1,0,0\" rotationrate=5"
273	bodyParts[leftSidePartsIndex[1]][0][0][0][0]=1
274	bodyParts[leftSidePartsIndex[1]][0][0][1][0]=1
275	bodyParts[leftSidePartsIndex[1]][0][0][-1][0]=1
276	bodyParts[leftSidePartsIndex[1]][0][1][0][0]=1
277	bodyParts[leftSidePartsIndex[1]][0][1][1][0]=1
278	bodyParts[leftSidePartsIndex[1]][0][1][-1][0]=1
279	bodyParts[leftSidePartsIndex[1]][0][-1][0][0]=1
280	bodyParts[leftSidePartsIndex[1]][0][-1][1][0]=1
281	bodyParts[leftSidePartsIndex[1]][0][-1][-1][0]=1
282	-- End insert solar panel.
283
284	-- End insert side parts.
285	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
286
287	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
288	-- Insert the top parts.
289	-- If you have no top parts, be sure to set topPartsIndex[0]=false
290	topPartsIndex={}
291	topPartsIndex[0]=""
292
293	-- Insert the CuboidLandingZone.
294	topPartsIndex[1]=7
295	bodyParts[topPartsIndex[1]][0][0][0][4]="CuboidLandingZone.mesh"
296	bodyParts[topPartsIndex[1]][0][0][0][5]="pitch=-90"
297
298	bodyParts[topPartsIndex[1]][0][0][0][0]=1
299	bodyParts[topPartsIndex[1]][0][0][0][2]="+-"
300	bodyParts[topPartsIndex[1]][1][0][0][0]=1
301	bodyParts[topPartsIndex[1]][-1][0][0][0]=1
302	bodyParts[topPartsIndex[1]][0][0][1][0]=1
303	bodyParts[topPartsIndex[1]][1][0][1][0]=1
304	bodyParts[topPartsIndex[1]][-1][0][1][0]=1
305	bodyParts[topPartsIndex[1]][0][0][2][0]=1
306	bodyParts[topPartsIndex[1]][1][0][2][0]=1
307	bodyParts[topPartsIndex[1]][-1][0][2][0]=1
308	bodyParts[topPartsIndex[1]][0][0][3][0]=1
309	bodyParts[topPartsIndex[1]][1][0][3][0]=1
310	bodyParts[topPartsIndex[1]][-1][0][3][0]=1
311	-- End insert the CuboidLanding Zone.
312
313	-- Insert the SatelliteDish.
314	topPartsIndex[2]=8
315	bodyParts[topPartsIndex[2]][0][0][0][4]="SatelliteDish.mesh"
316	bodyParts[topPartsIndex[2]][0][0][0][5]="pitch=-90"
317	bodyParts[topPartsIndex[2]][0][0][0][8]="rotationaxis=\"0,1,0\" rotationrate=5"
318	bodyParts[topPartsIndex[2]][0][0][0][0]=1
319	bodyParts[topPartsIndex[2]][0][0][1][0]=1
320	bodyParts[topPartsIndex[2]][0][0][-1][0]=1
321	bodyParts[topPartsIndex[2]][1][0][0][0]=1
322	bodyParts[topPartsIndex[2]][1][0][1][0]=1
323	bodyParts[topPartsIndex[2]][1][0][-1][0]=1
324	bodyParts[topPartsIndex[2]][-1][0][0][0]=1
325	bodyParts[topPartsIndex[2]][-1][0][1][0]=1
326	bodyParts[topPartsIndex[2]][-1][0][-1][0]=1
327	-- End insert the SatelliteDish.
328
329	-- End insert the top parts.
330	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
331
332	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
333	-- Insert the connectionparts, which are used to connect all the bodyparts.
334	-- If you're spacestation has no connectionparts, be sure to set connPartsIndex[0]=false.
335	connPartsIndex={}
336	connPartsIndex[0]=""
337
338	-- Insert the CuboidConnection.
339	connPartsIndex[1]=9
340	bodyParts[connPartsIndex[1]][0][0][0][4]="CuboidConnection.mesh"
341	bodyParts[connPartsIndex[1]][0][0][0][5]="roll=90"
342	bodyParts[connPartsIndex[1]][0][0][0][6]=""
343	bodyParts[connPartsIndex[1]][0][0][0][7]="pitch=90"
344	-- End insert the CuboidConnection.
345
346	-- End insert the connectionparts.
347
348	-- End create array bodyParts.
349	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
350
351
352
353	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
354	-- Here I define some functions which I will use later.
355
356	--This function actualizes the grid, which I have to call always after I have added a new part to the space station.
357	function actualizeGrid(Index,x,y,z)
358	for i=math.floor(-pDim/2),math.floor(pDim/2) do
359	for j=math.floor(-pDim/2),math.floor(pDim/2) do
360	for k=math.floor(-pDim/2),math.floor(pDim/2) do
361	if bodyParts[Index][i][j][k][0] == 1 then
362	for l=0,3 do
363	grid[x+i][y+j][z+k][l] = bodyParts[Index][i][j][k][l]
364	end
365	end
366	end
367	end
368	end
369	end
370	-- End actualizeGrid.
371
372	-- This function checks wheter a given parts fits at that position or not.
373	-- If the part fits there it returns 1, otherwise 0.
374	function checkPart(Index,x,y,z)
375	check=1
376	for i=math.floor(-pDim/2),math.floor(pDim/2) do
377	for j=math.floor(-pDim/2),math.floor(pDim/2) do
378	for k=math.floor(-pDim/2),math.floor(pDim/2) do
379	-- If the part occupies the position (i,j,k), the grid must be empty there ((x+i, y+j, z+k)==0), if not, check is zero,
380	-- which means that the part doesn't fit there.
381	if bodyParts[Index][i][j][k][0] == 1 and grid[x+i][y+j][z+k][0] == 1 then
382	check=0
383	end
384	end
385	end
386	end
387	return check
388	end
389	-- End checkPart function.
390
391	-- This function prints the model with tempPartIndex in the bodyParts array at position lx,ly,lz.
392	-- If you need to rotate the model around his own axis, then you have to set movEntity true and define the details of the rotation in
393	-- bodyParts[tempPartIndex][0][0][0][8].
394	-- If your model needs to be rotated like bodyParts[tempPartIndex][0][0][0][5], then side must be 1, for bodyParts[tempPartIndex][0][0][0][6] side must be 2,
395	-- for bodyParts[tempPartIndex][0][0][0][7] side must be 3.
396	function printModel(lx,ly,lz,tempPartIndex,movEntity,side)
397	if movEntity == true then
398	print("<MovableEntity scale=1 position=\"") print(lxgridDimsSScale) print(",") print(lygridDimsSScale) print(",") print(lzgridDimsSScale) print("\" ")
399	print(bodyParts[tempPartIndex][0][0][0][8]) print(">")
400	print("<attached>")
401	lx=0 ly=0 lz=0
402	end
403
404	print("<Model position=\"") print(lxgridDimsSScale) print(",") print(lygridDimsSScale) print(",") print(lzgridDimsSScale)
405	print("\" scale=") print(sSScale) print(" mesh= \"") print(bodyParts[tempPartIndex][0][0][0][4]) print("\"")
406
407	if side == 1 then
408	print(bodyParts[tempPartIndex][0][0][0][5]) print(">")
409	elseif side == 2 then
410	print(bodyParts[tempPartIndex][0][0][0][6]) print(">")
411	elseif side == 3 then
412	print(bodyParts[tempPartIndex][0][0][0][7]) print(">")
413	end
414
415	print("<attached>")
416	print(bodyParts[tempPartIndex][0][0][0][9])
417	print("</attached>")
418
419	print("</Model>")
420
421	if movEntity == true then
422	print("</attached>")
423	print("</MovableEntity>")
424	end
425	end
426	-- End function printModel()
427
428	-- End define functions.
429	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
430
431
432
433	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
434	-- This is xml code, which means now we attach some parts to the MovableEntity.
435	print("<attached>")
436	-- End attach to the MovableEntity.
437	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
438
439
440
441	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
442	-- Attach all bodyparts.
443	-- Define at which position in the x-direction you're space station will start.
444	x=math.random(-math.floor(xBPLength/2),-math.floor(xBPLength/2)+xBPVar)
445	-- Define at which position in the x-direction you're space station will end.
446	xMax=math.random(math.floor(xBPLength/2),math.floor(xBPLength/2)+xBPVar)
447	while x<xMax do
448	-- The same for the y- and z-direction.
449	y=math.random(-math.floor(yBPLength/2),-math.floor(yBPLength/2)+yBPVar)
450	yMax=math.random(math.floor(yBPLength/2),math.floor(yBPLength/2)+yBPVar)
451	while y<yMax do
452	yMax=math.random(math.floor(yBPLength/2),math.floor(yBPLength/2)+yBPVar)
453	z=math.random(-math.floor(zBPLength/2),-math.floor(zBPLength/2)+zBPVar)
454	zMax=math.random(math.floor(zBPLength/2),math.floor(zBPLength/2)+zBPVar)
455	while z<zMax do
456	-- This loop choses a bodypart, which fits at position (x,y,z).
457	-- If after the fifth time the part does still not fit we terminate the loop and set no part at postition (x,y,z).
458	partSet=0
459	counter=0
460	while counter<5 and partSet==0 do
461	-- This choses randomly a bodyPartIndex, which is the index used for the parts in the array bodyParts.
462	tempBodyPartIndex=math.random(1,sSBodyParts)
463	check=checkPart(tempBodyPartIndex,x,y,z)
464	-- If check == 1, this means that the part fits there, so we put it there and break the while true loop, to go on.
465	if check == 1 then
466	-- This prints the chosen part at position (xgridDimsSScale,ygridDimsSScale,zgridDimsSScale).
467	printModel(x,y,z,tempBodyPartIndex,false,1)
468	-- This actualizes the grid array with the values of the array bodyParts at the position tempBodyPartIndex, which is our randomly chosen part.
469	actualizeGrid(tempBodyPartIndex,x,y,z)
470	partSet=1
471	end
472	counter=counter+1
473	end
474	z=z+1
475	end
476	y=y+1
477	end
478	x=x+1
479	end
480	-- End attach all bodyparts.
481	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
482
483
484
485	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
486	-- Attach thrusters, if there are some.
487	if thrusterIndex ~= false then
488	-- To attach thrusters we start at (-sSSize/2,-sSSize/2,-sSSize/2+1) and iterate through x and y as start points and then through z,
489	-- where we go as long as there are parts, at the first position where isn't a part we set our thruster.
490	for x=math.floor(-sSSize/2),math.floor(sSSize/2) do
491	for y=math.floor(-sSSize/2),math.floor(sSSize/2) do
492	for z=math.floor(-sSSize/2)+1,math.floor(sSSize/2) do
493	if grid[x][y][z-1][0] == 1 and grid[x][y][z][0] == 0 then
494	-- This prints the thruster.
495	printModel(x,y,z,thrusterIndex,false,1)
496	-- This actualizes the grid array with the values of the array bodyParts at the position thrusterIndex.
497	actualizeGrid(thrusterIndex,x,y,z)
498	-- This breaks out of the for z=-sSSize/2+1,sSSize/2 loop, because we have set one thruster and for the z-axis that is all we want.
499	break
500	end
501	end
502	end
503	end
504	end
505	-- End attach Thrusters.
506	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
507
508
509
510	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
511	-- Attach cockpit, if there is one.
512	function setCockpit()
513	if grid[x][y][z][0] == 0 and grid[x][y][z+1][0] == 1 then
514	-- This checks whether the cockpits fits at that position or not.
515	check=checkPart(cockpitIndex,x,y,z)
516	if check == 1 then
517	-- This prints the cockpit.
518	printModel(x,y,z,cockpitIndex,false,1)
519	cockpitSet=1
520	-- This actualizes the grid array with the values of the array bodyParts at the position cockpitIndex.
521	actualizeGrid(cockpitIndex,x,y,z)
522	end
523	end
524	end
525
526	if cockpitIndex ~= false then
527	cockpitSet=0
528	z=math.floor(-sSSize/2)
529	while z<=math.floor(sSSize/2)-1 and cockpitSet==0 do
530	round=0
531	while round<=math.floor(sSSize/2)-1 and cockpitSet==0 do
532	y=round
533	x=-round
534	while x<=round and cockpitSet==0 do
535	setCockpit()
536	x=x+1
537	end
538	while y>=-round and cockpitSet==0 do
539	setCockpit()
540	y=y-1
541	end
542	while x>-round and cockpitSet==0 do
543	setCockpit()
544	x=x-1
545	end
546	while y<=round and cockpitSet==0 do
547	setCockpit()
548	y=y+1
549	end
550	round=round+1
551	end
552	z=z+1
553	end
554	end
555	-- End attach cockpit.
556	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
557
558
559
560	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
561	-- Attach parts on the left side of the space station.
562	function setLeftSidePart()
563	if grid[x][y][z][0] == 0 and grid[x+1][y][z][0] == 1 and (grid[x+1][y][z][1] == "+-" or grid[x+1][y][z][1] == "-") then
564	-- This checks whether the parts fits at position x,y,z or not.
565	check=checkPart(tempSidePartIndex,x,y,z)
566	if check == 1 then
567	-- This prints the part.
568	printModel(x,y,z,tempSidePartIndex,true,1)
569	partSet=1
570	-- This actualizes the grid array with the values of the array bodyParts at the position tempSidePartIndex.
571	actualizeGrid(tempSidePartIndex,x,y,z)
572	end
573
574	end
575	end
576
577	if leftSidePartsIndex[0] ~= false then
578	for sPC=1,leftSideParts do
579	tempSidePartIndex = leftSidePartsIndex[math.random(1,leftSideParts)]
580	partSet=0
581	x=math.floor(-sSSize/2)
582	while x<=math.floor(sSSize/2)-1 and partSet==0 do
583	round=0
584	while round<=math.floor(sSSize/2)-1 and partSet==0 do
585	y=round
586	z=-round
587	while z<=round and partSet==0 do
588	setLeftSidePart()
589	z=z+1
590	end
591	while y>=-round and partSet==0 do
592	setLeftSidePart()
593	y=y-1
594	end
595	while z>=-round and partSet==0 do
596	setLeftSidePart()
597	z=z-1
598	end
599	while y<=round and partSet==0 do
600	setLeftSidePart()
601	y=y+1
602	end
603	round=round+1
604	end
605	x=x+1
606	end
607	end
608	end
609	-- End attach left side parts.
610	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
611
612
613
614	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
615	-- Attach parts on the right side of the space station.
616	function setRightSidePart()
617	if grid[x][y][z][0] == 0 and grid[x-1][y][z][0] == 1 and (grid[x-1][y][z][1] == "+-" or grid[x-1][y][z][1] == "+") then
618	-- This checks whether the part fits or not.
619	check=checkPart(tempSidePartIndex,x,y,z)
620	if check == 1 then
621	-- This prints the part.
622	printModel(x,y,z,tempSidePartIndex,true,2)
623	partSet=1
624	-- This actualizes the grid array with the values of the array bodyParts at the position tempSidePartIndex.
625	actualizeGrid(tempSidePartIndex,x,y,z)
626	end
627
628	end
629	end
630
631	if rightSidePartsIndex[0] ~= false then
632	for sPC=1,rightSideParts do
633	tempSidePartIndex = rightSidePartsIndex[math.random(1,rightSideParts)]
634	partSet=0
635	x=math.floor(sSSize/2)
636	while x>=math.floor(-sSSize/2)+1 and partSet==0 do
637	round=0
638	while round<=math.floor(sSSize/2)-1 and partSet==0 do
639	y=round
640	z=-round
641	while z<=round and partSet==0 do
642	setRightSidePart()
643	z=z+1
644	end
645	while y>=-round and partSet==0 do
646	setRightSidePart()
647	y=y-1
648	end
649	while z>=-round and partSet==0 do
650	setRightSidePart()
651	z=z-1
652	end
653	while y<=round and partSet==0 do
654	setRightSidePart()
655	y=y+1
656	end
657	round=round+1
658	end
659	x=x-1
660	end
661	end
662	end
663	-- End attach right side parts.
664	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
665
666
667
668	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
669	-- Attach parts on top of the space station.
670	function setTopPart()
671	if grid[x][y][z][0] == 0 and grid[x][y-1][z][0] == 1 and (grid[x][y-1][z][2] == "+-" or grid[x][y-1][z][2] == "+") then
672	-- This checks whether the part fits or not.
673	check=checkPart(tempTopPartIndex,x,y,z)
674	if check == 1 then
675	-- This prints the part.
676	printModel(x,y,z,tempTopPartIndex,true,1)
677	partSet=1
678	-- This actualizes the grid array with the values of the array bodyParts at the position tempTopPartIndex.
679	actualizeGrid(tempTopPartIndex,x,y,z)
680	end
681	end
682	end
683
684	if topPartsIndex[0] ~= false then
685	for sPC=1,topParts do
686	tempTopPartIndex = topPartsIndex[sPC]
687	partSet=0
688	y=math.floor(sSSize/2)
689	while y>=math.floor(-sSSize/2)+1 and partSet==0 do
690	round=0
691	while round<=math.floor(sSSize/2)-1 and partSet==0 do
692	x=round
693	z=-round
694	while z<=round and partSet==0 do
695	setTopPart()
696	z=z+1
697	end
698	while x>=-round and partSet==0 do
699	setTopPart()
700	x=x-1
701	end
702	while z>=-round and partSet==0 do
703	setTopPart()
704	z=z-1
705	end
706	while x<=round and partSet==0 do
707	setTopPart()
708	x=x+1
709	end
710	round=round+1
711	end
712	y=y-1
713	end
714	end
715	end
716	-- End attach top parts.
717	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
718
719
720
721	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
722	-- Attach all connectionparts.
723	-- This iterates through the whole grid array.
724	if connPartsIndex[0] ~= false then
725	for x=math.floor(-sSSize/2),math.floor(sSSize/2)-1 do
726	for y=math.floor(-sSSize/2),math.floor(sSSize/2)-1 do
727	for z=math.floor(-sSSize/2),math.floor(sSSize/2)-1 do
728	tempConnPartIndex=connPartsIndex[math.random(1,connParts)]
729	-- This checks whether there has to be a connection part between (x,y,z) and (x+1,y,z) or not. First it checks if there is a part at (x,y,z) and
730	-- then it checks if that part can have a connection into the positive x-direction, if it can, it checks if there is a part at (x+1,y,z) and
731	-- if that part can have a connection into the negative x-direction, if both can, it prints the xml code to set a connection part.
732	if grid[x][y][z][0]==1 and (grid[x][y][z][1]=="+" or grid[x][y][z][1]=="+-") and grid[x+1][y][z][0]==1 and (grid[x+1][y][z][1]=="-" or grid[x+1][y][z][1]=="+-") then
733	-- This prints the connection part, the +1/2 is because the connection is set exactly in the middle of two gridpoints.
734	printModel(x+1/2,y,z,tempConnPartIndex,false,1)
735	end
736	-- The same as in the x-direction, but for the y-direction.
737	if grid[x][y][z][0]==1 and ( grid[x][y][z][2]=="+" or grid[x][y][z][2]=="+-" ) and grid[x][y+1][z][0]==1 and ( grid[x][y+1][z][2]=="-" or grid[x][y+1][z][2]=="+-" ) then
738	printModel(x,y+1/2,z,tempConnPartIndex,false,2)
739	end
740	-- The same as in the x-direction, but for the z-direction.
741	if grid[x][y][z][0]==1 and ( grid[x][y][z][3]=="+" or grid[x][y][z][3]=="+-" ) and grid[x][y][z+1][0]==1 and ( grid[x][y][z+1][3]=="-" or grid[x][y][z+1][3]=="+-" ) then
742	printModel(x,y,z+1/2,tempConnPartIndex,false,3)
743	end
744	end
745	end
746	end
747	end
748	-- End attach all connectionparts.
749	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
750
751
752
753	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
754	-- This is xml code, which ends the attachment and the MovableEntity.
755	print("</attached>")
756	print("</MovableEntity>")
757	-- End ends attachment and MovableEntity.
758	----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
759
760
761
762	-- End the createSpaceStation function.
763	end
764
765
766	-- This function is for the lazy guys, which do not care how the space station looks like, so I use some good standard values.
767	function createSpaceStation()
768	createSpaceStationPar(false,4,1,2,1,6,1,100)
769	end
770

Note: See TracBrowser for help on using the repository browser.

Download in other formats: