| 1 | /* | 
|---|
| 2 | Bullet Continuous Collision Detection and Physics Library | 
|---|
| 3 | Copyright (c) 2003-2006 Erwin Coumans  http://continuousphysics.com/Bullet/ | 
|---|
| 4 |  | 
|---|
| 5 | This software is provided 'as-is', without any express or implied warranty. | 
|---|
| 6 | In no event will the authors be held liable for any damages arising from the use of this software. | 
|---|
| 7 | Permission is granted to anyone to use this software for any purpose, | 
|---|
| 8 | including commercial applications, and to alter it and redistribute it freely, | 
|---|
| 9 | subject to the following restrictions: | 
|---|
| 10 |  | 
|---|
| 11 | 1. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required. | 
|---|
| 12 | 2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software. | 
|---|
| 13 | 3. This notice may not be removed or altered from any source distribution. | 
|---|
| 14 | */ | 
|---|
| 15 |  | 
|---|
| 16 |  | 
|---|
| 17 | #include "btDiscreteDynamicsWorld.h" | 
|---|
| 18 |  | 
|---|
| 19 | //collision detection | 
|---|
| 20 | #include "BulletCollision/CollisionDispatch/btCollisionDispatcher.h" | 
|---|
| 21 | #include "BulletCollision/BroadphaseCollision/btSimpleBroadphase.h" | 
|---|
| 22 | #include "BulletCollision/CollisionShapes/btCollisionShape.h" | 
|---|
| 23 | #include "BulletCollision/CollisionDispatch/btSimulationIslandManager.h" | 
|---|
| 24 | #include "LinearMath/btTransformUtil.h" | 
|---|
| 25 | #include "LinearMath/btQuickprof.h" | 
|---|
| 26 |  | 
|---|
| 27 | //rigidbody & constraints | 
|---|
| 28 | #include "BulletDynamics/Dynamics/btRigidBody.h" | 
|---|
| 29 | #include "BulletDynamics/ConstraintSolver/btSequentialImpulseConstraintSolver.h" | 
|---|
| 30 | #include "BulletDynamics/ConstraintSolver/btContactSolverInfo.h" | 
|---|
| 31 | #include "BulletDynamics/ConstraintSolver/btTypedConstraint.h" | 
|---|
| 32 | #include "BulletDynamics/ConstraintSolver/btPoint2PointConstraint.h" | 
|---|
| 33 | #include "BulletDynamics/ConstraintSolver/btHingeConstraint.h" | 
|---|
| 34 | #include "BulletDynamics/ConstraintSolver/btConeTwistConstraint.h" | 
|---|
| 35 | #include "BulletDynamics/ConstraintSolver/btGeneric6DofConstraint.h" | 
|---|
| 36 | #include "BulletDynamics/ConstraintSolver/btSliderConstraint.h" | 
|---|
| 37 |  | 
|---|
| 38 | //for debug rendering | 
|---|
| 39 | #include "BulletCollision/CollisionShapes/btBoxShape.h" | 
|---|
| 40 | #include "BulletCollision/CollisionShapes/btCapsuleShape.h" | 
|---|
| 41 | #include "BulletCollision/CollisionShapes/btCompoundShape.h" | 
|---|
| 42 | #include "BulletCollision/CollisionShapes/btConeShape.h" | 
|---|
| 43 | #include "BulletCollision/CollisionShapes/btConvexTriangleMeshShape.h" | 
|---|
| 44 | #include "BulletCollision/CollisionShapes/btCylinderShape.h" | 
|---|
| 45 | #include "BulletCollision/CollisionShapes/btMultiSphereShape.h" | 
|---|
| 46 | #include "BulletCollision/CollisionShapes/btPolyhedralConvexShape.h" | 
|---|
| 47 | #include "BulletCollision/CollisionShapes/btSphereShape.h" | 
|---|
| 48 | #include "BulletCollision/CollisionShapes/btTriangleCallback.h" | 
|---|
| 49 | #include "BulletCollision/CollisionShapes/btTriangleMeshShape.h" | 
|---|
| 50 | #include "BulletCollision/CollisionShapes/btStaticPlaneShape.h" | 
|---|
| 51 | #include "LinearMath/btIDebugDraw.h" | 
|---|
| 52 |  | 
|---|
| 53 |  | 
|---|
| 54 | #include "BulletDynamics/Dynamics/btActionInterface.h" | 
|---|
| 55 | #include "LinearMath/btQuickprof.h" | 
|---|
| 56 | #include "LinearMath/btMotionState.h" | 
|---|
| 57 |  | 
|---|
| 58 |  | 
|---|
| 59 |  | 
|---|
| 60 |  | 
|---|
| 61 |  | 
|---|
| 62 | btDiscreteDynamicsWorld::btDiscreteDynamicsWorld(btDispatcher* dispatcher,btBroadphaseInterface* pairCache,btConstraintSolver* constraintSolver, btCollisionConfiguration* collisionConfiguration) | 
|---|
| 63 | :btDynamicsWorld(dispatcher,pairCache,collisionConfiguration), | 
|---|
| 64 | m_constraintSolver(constraintSolver), | 
|---|
| 65 | m_gravity(0,-10,0), | 
|---|
| 66 | m_localTime(btScalar(1.)/btScalar(60.)), | 
|---|
| 67 | m_profileTimings(0) | 
|---|
| 68 | { | 
|---|
| 69 | if (!m_constraintSolver) | 
|---|
| 70 | { | 
|---|
| 71 | void* mem = btAlignedAlloc(sizeof(btSequentialImpulseConstraintSolver),16); | 
|---|
| 72 | m_constraintSolver = new (mem) btSequentialImpulseConstraintSolver; | 
|---|
| 73 | m_ownsConstraintSolver = true; | 
|---|
| 74 | } else | 
|---|
| 75 | { | 
|---|
| 76 | m_ownsConstraintSolver = false; | 
|---|
| 77 | } | 
|---|
| 78 |  | 
|---|
| 79 | { | 
|---|
| 80 | void* mem = btAlignedAlloc(sizeof(btSimulationIslandManager),16); | 
|---|
| 81 | m_islandManager = new (mem) btSimulationIslandManager(); | 
|---|
| 82 | } | 
|---|
| 83 |  | 
|---|
| 84 | m_ownsIslandManager = true; | 
|---|
| 85 | } | 
|---|
| 86 |  | 
|---|
| 87 |  | 
|---|
| 88 | btDiscreteDynamicsWorld::~btDiscreteDynamicsWorld() | 
|---|
| 89 | { | 
|---|
| 90 | //only delete it when we created it | 
|---|
| 91 | if (m_ownsIslandManager) | 
|---|
| 92 | { | 
|---|
| 93 | m_islandManager->~btSimulationIslandManager(); | 
|---|
| 94 | btAlignedFree( m_islandManager); | 
|---|
| 95 | } | 
|---|
| 96 | if (m_ownsConstraintSolver) | 
|---|
| 97 | { | 
|---|
| 98 |  | 
|---|
| 99 | m_constraintSolver->~btConstraintSolver(); | 
|---|
| 100 | btAlignedFree(m_constraintSolver); | 
|---|
| 101 | } | 
|---|
| 102 | } | 
|---|
| 103 |  | 
|---|
| 104 | void    btDiscreteDynamicsWorld::saveKinematicState(btScalar timeStep) | 
|---|
| 105 | { | 
|---|
| 106 |  | 
|---|
| 107 | for (int i=0;i<m_collisionObjects.size();i++) | 
|---|
| 108 | { | 
|---|
| 109 | btCollisionObject* colObj = m_collisionObjects[i]; | 
|---|
| 110 | btRigidBody* body = btRigidBody::upcast(colObj); | 
|---|
| 111 | if (body) | 
|---|
| 112 | { | 
|---|
| 113 | if (body->getActivationState() != ISLAND_SLEEPING) | 
|---|
| 114 | { | 
|---|
| 115 | if (body->isKinematicObject()) | 
|---|
| 116 | { | 
|---|
| 117 | //to calculate velocities next frame | 
|---|
| 118 | body->saveKinematicState(timeStep); | 
|---|
| 119 | } | 
|---|
| 120 | } | 
|---|
| 121 | } | 
|---|
| 122 | } | 
|---|
| 123 | } | 
|---|
| 124 |  | 
|---|
| 125 | void    btDiscreteDynamicsWorld::debugDrawWorld() | 
|---|
| 126 | { | 
|---|
| 127 | BT_PROFILE("debugDrawWorld"); | 
|---|
| 128 |  | 
|---|
| 129 | if (getDebugDrawer() && getDebugDrawer()->getDebugMode() & btIDebugDraw::DBG_DrawContactPoints) | 
|---|
| 130 | { | 
|---|
| 131 | int numManifolds = getDispatcher()->getNumManifolds(); | 
|---|
| 132 | btVector3 color(0,0,0); | 
|---|
| 133 | for (int i=0;i<numManifolds;i++) | 
|---|
| 134 | { | 
|---|
| 135 | btPersistentManifold* contactManifold = getDispatcher()->getManifoldByIndexInternal(i); | 
|---|
| 136 | //btCollisionObject* obA = static_cast<btCollisionObject*>(contactManifold->getBody0()); | 
|---|
| 137 | //btCollisionObject* obB = static_cast<btCollisionObject*>(contactManifold->getBody1()); | 
|---|
| 138 |  | 
|---|
| 139 | int numContacts = contactManifold->getNumContacts(); | 
|---|
| 140 | for (int j=0;j<numContacts;j++) | 
|---|
| 141 | { | 
|---|
| 142 | btManifoldPoint& cp = contactManifold->getContactPoint(j); | 
|---|
| 143 | getDebugDrawer()->drawContactPoint(cp.m_positionWorldOnB,cp.m_normalWorldOnB,cp.getDistance(),cp.getLifeTime(),color); | 
|---|
| 144 | } | 
|---|
| 145 | } | 
|---|
| 146 | } | 
|---|
| 147 | bool drawConstraints = false; | 
|---|
| 148 | if (getDebugDrawer()) | 
|---|
| 149 | { | 
|---|
| 150 | int mode = getDebugDrawer()->getDebugMode(); | 
|---|
| 151 | if(mode  & (btIDebugDraw::DBG_DrawConstraints | btIDebugDraw::DBG_DrawConstraintLimits)) | 
|---|
| 152 | { | 
|---|
| 153 | drawConstraints = true; | 
|---|
| 154 | } | 
|---|
| 155 | } | 
|---|
| 156 | if(drawConstraints) | 
|---|
| 157 | { | 
|---|
| 158 | for(int i = getNumConstraints()-1; i>=0 ;i--) | 
|---|
| 159 | { | 
|---|
| 160 | btTypedConstraint* constraint = getConstraint(i); | 
|---|
| 161 | debugDrawConstraint(constraint); | 
|---|
| 162 | } | 
|---|
| 163 | } | 
|---|
| 164 |  | 
|---|
| 165 |  | 
|---|
| 166 |  | 
|---|
| 167 | if (getDebugDrawer() && getDebugDrawer()->getDebugMode() & (btIDebugDraw::DBG_DrawWireframe | btIDebugDraw::DBG_DrawAabb)) | 
|---|
| 168 | { | 
|---|
| 169 | int i; | 
|---|
| 170 |  | 
|---|
| 171 | for (  i=0;i<m_collisionObjects.size();i++) | 
|---|
| 172 | { | 
|---|
| 173 | btCollisionObject* colObj = m_collisionObjects[i]; | 
|---|
| 174 | if (getDebugDrawer() && getDebugDrawer()->getDebugMode() & btIDebugDraw::DBG_DrawWireframe) | 
|---|
| 175 | { | 
|---|
| 176 | btVector3 color(btScalar(255.),btScalar(255.),btScalar(255.)); | 
|---|
| 177 | switch(colObj->getActivationState()) | 
|---|
| 178 | { | 
|---|
| 179 | case  ACTIVE_TAG: | 
|---|
| 180 | color = btVector3(btScalar(255.),btScalar(255.),btScalar(255.)); break; | 
|---|
| 181 | case ISLAND_SLEEPING: | 
|---|
| 182 | color =  btVector3(btScalar(0.),btScalar(255.),btScalar(0.));break; | 
|---|
| 183 | case WANTS_DEACTIVATION: | 
|---|
| 184 | color = btVector3(btScalar(0.),btScalar(255.),btScalar(255.));break; | 
|---|
| 185 | case DISABLE_DEACTIVATION: | 
|---|
| 186 | color = btVector3(btScalar(255.),btScalar(0.),btScalar(0.));break; | 
|---|
| 187 | case DISABLE_SIMULATION: | 
|---|
| 188 | color = btVector3(btScalar(255.),btScalar(255.),btScalar(0.));break; | 
|---|
| 189 | default: | 
|---|
| 190 | { | 
|---|
| 191 | color = btVector3(btScalar(255.),btScalar(0.),btScalar(0.)); | 
|---|
| 192 | } | 
|---|
| 193 | }; | 
|---|
| 194 |  | 
|---|
| 195 | debugDrawObject(colObj->getWorldTransform(),colObj->getCollisionShape(),color); | 
|---|
| 196 | } | 
|---|
| 197 | if (m_debugDrawer && (m_debugDrawer->getDebugMode() & btIDebugDraw::DBG_DrawAabb)) | 
|---|
| 198 | { | 
|---|
| 199 | btVector3 minAabb,maxAabb; | 
|---|
| 200 | btVector3 colorvec(1,0,0); | 
|---|
| 201 | colObj->getCollisionShape()->getAabb(colObj->getWorldTransform(), minAabb,maxAabb); | 
|---|
| 202 | m_debugDrawer->drawAabb(minAabb,maxAabb,colorvec); | 
|---|
| 203 | } | 
|---|
| 204 |  | 
|---|
| 205 | } | 
|---|
| 206 |  | 
|---|
| 207 | if (getDebugDrawer() && getDebugDrawer()->getDebugMode()) | 
|---|
| 208 | { | 
|---|
| 209 | for (i=0;i<m_actions.size();i++) | 
|---|
| 210 | { | 
|---|
| 211 | m_actions[i]->debugDraw(m_debugDrawer); | 
|---|
| 212 | } | 
|---|
| 213 | } | 
|---|
| 214 | } | 
|---|
| 215 | } | 
|---|
| 216 |  | 
|---|
| 217 | void    btDiscreteDynamicsWorld::clearForces() | 
|---|
| 218 | { | 
|---|
| 219 | ///@todo: iterate over awake simulation islands! | 
|---|
| 220 | for ( int i=0;i<m_collisionObjects.size();i++) | 
|---|
| 221 | { | 
|---|
| 222 | btCollisionObject* colObj = m_collisionObjects[i]; | 
|---|
| 223 |  | 
|---|
| 224 | btRigidBody* body = btRigidBody::upcast(colObj); | 
|---|
| 225 | if (body) | 
|---|
| 226 | { | 
|---|
| 227 | body->clearForces(); | 
|---|
| 228 | } | 
|---|
| 229 | } | 
|---|
| 230 | } | 
|---|
| 231 |  | 
|---|
| 232 | ///apply gravity, call this once per timestep | 
|---|
| 233 | void    btDiscreteDynamicsWorld::applyGravity() | 
|---|
| 234 | { | 
|---|
| 235 | ///@todo: iterate over awake simulation islands! | 
|---|
| 236 | for ( int i=0;i<m_collisionObjects.size();i++) | 
|---|
| 237 | { | 
|---|
| 238 | btCollisionObject* colObj = m_collisionObjects[i]; | 
|---|
| 239 |  | 
|---|
| 240 | btRigidBody* body = btRigidBody::upcast(colObj); | 
|---|
| 241 | if (body && body->isActive()) | 
|---|
| 242 | { | 
|---|
| 243 | body->applyGravity(); | 
|---|
| 244 | } | 
|---|
| 245 | } | 
|---|
| 246 | } | 
|---|
| 247 |  | 
|---|
| 248 |  | 
|---|
| 249 | void    btDiscreteDynamicsWorld::synchronizeSingleMotionState(btRigidBody* body) | 
|---|
| 250 | { | 
|---|
| 251 | btAssert(body); | 
|---|
| 252 |  | 
|---|
| 253 | if (body->getMotionState() && !body->isStaticOrKinematicObject()) | 
|---|
| 254 | { | 
|---|
| 255 | //we need to call the update at least once, even for sleeping objects | 
|---|
| 256 | //otherwise the 'graphics' transform never updates properly | 
|---|
| 257 | ///@todo: add 'dirty' flag | 
|---|
| 258 | //if (body->getActivationState() != ISLAND_SLEEPING) | 
|---|
| 259 | { | 
|---|
| 260 | btTransform interpolatedTransform; | 
|---|
| 261 | btTransformUtil::integrateTransform(body->getInterpolationWorldTransform(), | 
|---|
| 262 | body->getInterpolationLinearVelocity(),body->getInterpolationAngularVelocity(),m_localTime*body->getHitFraction(),interpolatedTransform); | 
|---|
| 263 | body->getMotionState()->setWorldTransform(interpolatedTransform); | 
|---|
| 264 | } | 
|---|
| 265 | } | 
|---|
| 266 | } | 
|---|
| 267 |  | 
|---|
| 268 |  | 
|---|
| 269 | void    btDiscreteDynamicsWorld::synchronizeMotionStates() | 
|---|
| 270 | { | 
|---|
| 271 | BT_PROFILE("synchronizeMotionStates"); | 
|---|
| 272 | { | 
|---|
| 273 | //todo: iterate over awake simulation islands! | 
|---|
| 274 | for ( int i=0;i<m_collisionObjects.size();i++) | 
|---|
| 275 | { | 
|---|
| 276 | btCollisionObject* colObj = m_collisionObjects[i]; | 
|---|
| 277 |  | 
|---|
| 278 | btRigidBody* body = btRigidBody::upcast(colObj); | 
|---|
| 279 | if (body) | 
|---|
| 280 | synchronizeSingleMotionState(body); | 
|---|
| 281 | } | 
|---|
| 282 | } | 
|---|
| 283 | /* | 
|---|
| 284 | if (getDebugDrawer() && getDebugDrawer()->getDebugMode() & btIDebugDraw::DBG_DrawWireframe) | 
|---|
| 285 | { | 
|---|
| 286 | for ( int i=0;i<this->m_vehicles.size();i++) | 
|---|
| 287 | { | 
|---|
| 288 | for (int v=0;v<m_vehicles[i]->getNumWheels();v++) | 
|---|
| 289 | { | 
|---|
| 290 | //synchronize the wheels with the (interpolated) chassis worldtransform | 
|---|
| 291 | m_vehicles[i]->updateWheelTransform(v,true); | 
|---|
| 292 | } | 
|---|
| 293 | } | 
|---|
| 294 | } | 
|---|
| 295 | */ | 
|---|
| 296 |  | 
|---|
| 297 |  | 
|---|
| 298 | } | 
|---|
| 299 |  | 
|---|
| 300 |  | 
|---|
| 301 | int     btDiscreteDynamicsWorld::stepSimulation( btScalar timeStep,int maxSubSteps, btScalar fixedTimeStep) | 
|---|
| 302 | { | 
|---|
| 303 | startProfiling(timeStep); | 
|---|
| 304 |  | 
|---|
| 305 | BT_PROFILE("stepSimulation"); | 
|---|
| 306 |  | 
|---|
| 307 | int numSimulationSubSteps = 0; | 
|---|
| 308 |  | 
|---|
| 309 | if (maxSubSteps) | 
|---|
| 310 | { | 
|---|
| 311 | //fixed timestep with interpolation | 
|---|
| 312 | m_localTime += timeStep; | 
|---|
| 313 | if (m_localTime >= fixedTimeStep) | 
|---|
| 314 | { | 
|---|
| 315 | numSimulationSubSteps = int( m_localTime / fixedTimeStep); | 
|---|
| 316 | m_localTime -= numSimulationSubSteps * fixedTimeStep; | 
|---|
| 317 | } | 
|---|
| 318 | } else | 
|---|
| 319 | { | 
|---|
| 320 | //variable timestep | 
|---|
| 321 | fixedTimeStep = timeStep; | 
|---|
| 322 | m_localTime = timeStep; | 
|---|
| 323 | if (btFuzzyZero(timeStep)) | 
|---|
| 324 | { | 
|---|
| 325 | numSimulationSubSteps = 0; | 
|---|
| 326 | maxSubSteps = 0; | 
|---|
| 327 | } else | 
|---|
| 328 | { | 
|---|
| 329 | numSimulationSubSteps = 1; | 
|---|
| 330 | maxSubSteps = 1; | 
|---|
| 331 | } | 
|---|
| 332 | } | 
|---|
| 333 |  | 
|---|
| 334 | //process some debugging flags | 
|---|
| 335 | if (getDebugDrawer()) | 
|---|
| 336 | { | 
|---|
| 337 | btIDebugDraw* debugDrawer = getDebugDrawer (); | 
|---|
| 338 | gDisableDeactivation = (debugDrawer->getDebugMode() & btIDebugDraw::DBG_NoDeactivation) != 0; | 
|---|
| 339 | } | 
|---|
| 340 | if (numSimulationSubSteps) | 
|---|
| 341 | { | 
|---|
| 342 |  | 
|---|
| 343 | saveKinematicState(fixedTimeStep); | 
|---|
| 344 |  | 
|---|
| 345 | applyGravity(); | 
|---|
| 346 |  | 
|---|
| 347 | //clamp the number of substeps, to prevent simulation grinding spiralling down to a halt | 
|---|
| 348 | int clampedSimulationSteps = (numSimulationSubSteps > maxSubSteps)? maxSubSteps : numSimulationSubSteps; | 
|---|
| 349 |  | 
|---|
| 350 | for (int i=0;i<clampedSimulationSteps;i++) | 
|---|
| 351 | { | 
|---|
| 352 | internalSingleStepSimulation(fixedTimeStep); | 
|---|
| 353 | synchronizeMotionStates(); | 
|---|
| 354 | } | 
|---|
| 355 |  | 
|---|
| 356 | } | 
|---|
| 357 |  | 
|---|
| 358 | synchronizeMotionStates(); | 
|---|
| 359 |  | 
|---|
| 360 | clearForces(); | 
|---|
| 361 |  | 
|---|
| 362 | #ifndef BT_NO_PROFILE | 
|---|
| 363 | CProfileManager::Increment_Frame_Counter(); | 
|---|
| 364 | #endif //BT_NO_PROFILE | 
|---|
| 365 |  | 
|---|
| 366 | return numSimulationSubSteps; | 
|---|
| 367 | } | 
|---|
| 368 |  | 
|---|
| 369 | void    btDiscreteDynamicsWorld::internalSingleStepSimulation(btScalar timeStep) | 
|---|
| 370 | { | 
|---|
| 371 |  | 
|---|
| 372 | BT_PROFILE("internalSingleStepSimulation"); | 
|---|
| 373 |  | 
|---|
| 374 | ///apply gravity, predict motion | 
|---|
| 375 | predictUnconstraintMotion(timeStep); | 
|---|
| 376 |  | 
|---|
| 377 | btDispatcherInfo& dispatchInfo = getDispatchInfo(); | 
|---|
| 378 |  | 
|---|
| 379 | dispatchInfo.m_timeStep = timeStep; | 
|---|
| 380 | dispatchInfo.m_stepCount = 0; | 
|---|
| 381 | dispatchInfo.m_debugDraw = getDebugDrawer(); | 
|---|
| 382 |  | 
|---|
| 383 | ///perform collision detection | 
|---|
| 384 | performDiscreteCollisionDetection(); | 
|---|
| 385 |  | 
|---|
| 386 | calculateSimulationIslands(); | 
|---|
| 387 |  | 
|---|
| 388 |  | 
|---|
| 389 | getSolverInfo().m_timeStep = timeStep; | 
|---|
| 390 |  | 
|---|
| 391 |  | 
|---|
| 392 |  | 
|---|
| 393 | ///solve contact and other joint constraints | 
|---|
| 394 | solveConstraints(getSolverInfo()); | 
|---|
| 395 |  | 
|---|
| 396 | ///CallbackTriggers(); | 
|---|
| 397 |  | 
|---|
| 398 | ///integrate transforms | 
|---|
| 399 | integrateTransforms(timeStep); | 
|---|
| 400 |  | 
|---|
| 401 | ///update vehicle simulation | 
|---|
| 402 | updateActions(timeStep); | 
|---|
| 403 |  | 
|---|
| 404 | updateActivationState( timeStep ); | 
|---|
| 405 |  | 
|---|
| 406 | if(0 != m_internalTickCallback) { | 
|---|
| 407 | (*m_internalTickCallback)(this, timeStep); | 
|---|
| 408 | } | 
|---|
| 409 | } | 
|---|
| 410 |  | 
|---|
| 411 | void    btDiscreteDynamicsWorld::setGravity(const btVector3& gravity) | 
|---|
| 412 | { | 
|---|
| 413 | m_gravity = gravity; | 
|---|
| 414 | for ( int i=0;i<m_collisionObjects.size();i++) | 
|---|
| 415 | { | 
|---|
| 416 | btCollisionObject* colObj = m_collisionObjects[i]; | 
|---|
| 417 | btRigidBody* body = btRigidBody::upcast(colObj); | 
|---|
| 418 | if (body) | 
|---|
| 419 | { | 
|---|
| 420 | body->setGravity(gravity); | 
|---|
| 421 | } | 
|---|
| 422 | } | 
|---|
| 423 | } | 
|---|
| 424 |  | 
|---|
| 425 | btVector3 btDiscreteDynamicsWorld::getGravity () const | 
|---|
| 426 | { | 
|---|
| 427 | return m_gravity; | 
|---|
| 428 | } | 
|---|
| 429 |  | 
|---|
| 430 |  | 
|---|
| 431 | void    btDiscreteDynamicsWorld::removeRigidBody(btRigidBody* body) | 
|---|
| 432 | { | 
|---|
| 433 | removeCollisionObject(body); | 
|---|
| 434 | } | 
|---|
| 435 |  | 
|---|
| 436 | void    btDiscreteDynamicsWorld::addRigidBody(btRigidBody* body) | 
|---|
| 437 | { | 
|---|
| 438 | if (!body->isStaticOrKinematicObject()) | 
|---|
| 439 | { | 
|---|
| 440 | body->setGravity(m_gravity); | 
|---|
| 441 | } | 
|---|
| 442 |  | 
|---|
| 443 | if (body->getCollisionShape()) | 
|---|
| 444 | { | 
|---|
| 445 | bool isDynamic = !(body->isStaticObject() || body->isKinematicObject()); | 
|---|
| 446 | short collisionFilterGroup = isDynamic? short(btBroadphaseProxy::DefaultFilter) : short(btBroadphaseProxy::StaticFilter); | 
|---|
| 447 | short collisionFilterMask = isDynamic?  short(btBroadphaseProxy::AllFilter) :   short(btBroadphaseProxy::AllFilter ^ btBroadphaseProxy::StaticFilter); | 
|---|
| 448 |  | 
|---|
| 449 | addCollisionObject(body,collisionFilterGroup,collisionFilterMask); | 
|---|
| 450 | } | 
|---|
| 451 | } | 
|---|
| 452 |  | 
|---|
| 453 | void    btDiscreteDynamicsWorld::addRigidBody(btRigidBody* body, short group, short mask) | 
|---|
| 454 | { | 
|---|
| 455 | if (!body->isStaticOrKinematicObject()) | 
|---|
| 456 | { | 
|---|
| 457 | body->setGravity(m_gravity); | 
|---|
| 458 | } | 
|---|
| 459 |  | 
|---|
| 460 | if (body->getCollisionShape()) | 
|---|
| 461 | { | 
|---|
| 462 | addCollisionObject(body,group,mask); | 
|---|
| 463 | } | 
|---|
| 464 | } | 
|---|
| 465 |  | 
|---|
| 466 |  | 
|---|
| 467 | void    btDiscreteDynamicsWorld::updateActions(btScalar timeStep) | 
|---|
| 468 | { | 
|---|
| 469 | BT_PROFILE("updateActions"); | 
|---|
| 470 |  | 
|---|
| 471 | for ( int i=0;i<m_actions.size();i++) | 
|---|
| 472 | { | 
|---|
| 473 | m_actions[i]->updateAction( this, timeStep); | 
|---|
| 474 | } | 
|---|
| 475 | } | 
|---|
| 476 |  | 
|---|
| 477 |  | 
|---|
| 478 | void    btDiscreteDynamicsWorld::updateActivationState(btScalar timeStep) | 
|---|
| 479 | { | 
|---|
| 480 | BT_PROFILE("updateActivationState"); | 
|---|
| 481 |  | 
|---|
| 482 | for ( int i=0;i<m_collisionObjects.size();i++) | 
|---|
| 483 | { | 
|---|
| 484 | btCollisionObject* colObj = m_collisionObjects[i]; | 
|---|
| 485 | btRigidBody* body = btRigidBody::upcast(colObj); | 
|---|
| 486 | if (body) | 
|---|
| 487 | { | 
|---|
| 488 | body->updateDeactivation(timeStep); | 
|---|
| 489 |  | 
|---|
| 490 | if (body->wantsSleeping()) | 
|---|
| 491 | { | 
|---|
| 492 | if (body->isStaticOrKinematicObject()) | 
|---|
| 493 | { | 
|---|
| 494 | body->setActivationState(ISLAND_SLEEPING); | 
|---|
| 495 | } else | 
|---|
| 496 | { | 
|---|
| 497 | if (body->getActivationState() == ACTIVE_TAG) | 
|---|
| 498 | body->setActivationState( WANTS_DEACTIVATION ); | 
|---|
| 499 | if (body->getActivationState() == ISLAND_SLEEPING) | 
|---|
| 500 | { | 
|---|
| 501 | body->setAngularVelocity(btVector3(0,0,0)); | 
|---|
| 502 | body->setLinearVelocity(btVector3(0,0,0)); | 
|---|
| 503 | } | 
|---|
| 504 |  | 
|---|
| 505 | } | 
|---|
| 506 | } else | 
|---|
| 507 | { | 
|---|
| 508 | if (body->getActivationState() != DISABLE_DEACTIVATION) | 
|---|
| 509 | body->setActivationState( ACTIVE_TAG ); | 
|---|
| 510 | } | 
|---|
| 511 | } | 
|---|
| 512 | } | 
|---|
| 513 | } | 
|---|
| 514 |  | 
|---|
| 515 | void    btDiscreteDynamicsWorld::addConstraint(btTypedConstraint* constraint,bool disableCollisionsBetweenLinkedBodies) | 
|---|
| 516 | { | 
|---|
| 517 | m_constraints.push_back(constraint); | 
|---|
| 518 | if (disableCollisionsBetweenLinkedBodies) | 
|---|
| 519 | { | 
|---|
| 520 | constraint->getRigidBodyA().addConstraintRef(constraint); | 
|---|
| 521 | constraint->getRigidBodyB().addConstraintRef(constraint); | 
|---|
| 522 | } | 
|---|
| 523 | } | 
|---|
| 524 |  | 
|---|
| 525 | void    btDiscreteDynamicsWorld::removeConstraint(btTypedConstraint* constraint) | 
|---|
| 526 | { | 
|---|
| 527 | m_constraints.remove(constraint); | 
|---|
| 528 | constraint->getRigidBodyA().removeConstraintRef(constraint); | 
|---|
| 529 | constraint->getRigidBodyB().removeConstraintRef(constraint); | 
|---|
| 530 | } | 
|---|
| 531 |  | 
|---|
| 532 | void    btDiscreteDynamicsWorld::addAction(btActionInterface* action) | 
|---|
| 533 | { | 
|---|
| 534 | m_actions.push_back(action); | 
|---|
| 535 | } | 
|---|
| 536 |  | 
|---|
| 537 | void    btDiscreteDynamicsWorld::removeAction(btActionInterface* action) | 
|---|
| 538 | { | 
|---|
| 539 | m_actions.remove(action); | 
|---|
| 540 | } | 
|---|
| 541 |  | 
|---|
| 542 |  | 
|---|
| 543 | void    btDiscreteDynamicsWorld::addVehicle(btActionInterface* vehicle) | 
|---|
| 544 | { | 
|---|
| 545 | addAction(vehicle); | 
|---|
| 546 | } | 
|---|
| 547 |  | 
|---|
| 548 | void    btDiscreteDynamicsWorld::removeVehicle(btActionInterface* vehicle) | 
|---|
| 549 | { | 
|---|
| 550 | removeAction(vehicle); | 
|---|
| 551 | } | 
|---|
| 552 |  | 
|---|
| 553 | void    btDiscreteDynamicsWorld::addCharacter(btActionInterface* character) | 
|---|
| 554 | { | 
|---|
| 555 | addAction(character); | 
|---|
| 556 | } | 
|---|
| 557 |  | 
|---|
| 558 | void    btDiscreteDynamicsWorld::removeCharacter(btActionInterface* character) | 
|---|
| 559 | { | 
|---|
| 560 | removeAction(character); | 
|---|
| 561 | } | 
|---|
| 562 |  | 
|---|
| 563 |  | 
|---|
| 564 | SIMD_FORCE_INLINE       int     btGetConstraintIslandId(const btTypedConstraint* lhs) | 
|---|
| 565 | { | 
|---|
| 566 | int islandId; | 
|---|
| 567 |  | 
|---|
| 568 | const btCollisionObject& rcolObj0 = lhs->getRigidBodyA(); | 
|---|
| 569 | const btCollisionObject& rcolObj1 = lhs->getRigidBodyB(); | 
|---|
| 570 | islandId= rcolObj0.getIslandTag()>=0?rcolObj0.getIslandTag():rcolObj1.getIslandTag(); | 
|---|
| 571 | return islandId; | 
|---|
| 572 |  | 
|---|
| 573 | } | 
|---|
| 574 |  | 
|---|
| 575 |  | 
|---|
| 576 | class btSortConstraintOnIslandPredicate | 
|---|
| 577 | { | 
|---|
| 578 | public: | 
|---|
| 579 |  | 
|---|
| 580 | bool operator() ( const btTypedConstraint* lhs, const btTypedConstraint* rhs ) | 
|---|
| 581 | { | 
|---|
| 582 | int rIslandId0,lIslandId0; | 
|---|
| 583 | rIslandId0 = btGetConstraintIslandId(rhs); | 
|---|
| 584 | lIslandId0 = btGetConstraintIslandId(lhs); | 
|---|
| 585 | return lIslandId0 < rIslandId0; | 
|---|
| 586 | } | 
|---|
| 587 | }; | 
|---|
| 588 |  | 
|---|
| 589 |  | 
|---|
| 590 |  | 
|---|
| 591 |  | 
|---|
| 592 | void    btDiscreteDynamicsWorld::solveConstraints(btContactSolverInfo& solverInfo) | 
|---|
| 593 | { | 
|---|
| 594 | BT_PROFILE("solveConstraints"); | 
|---|
| 595 |  | 
|---|
| 596 | struct InplaceSolverIslandCallback : public btSimulationIslandManager::IslandCallback | 
|---|
| 597 | { | 
|---|
| 598 |  | 
|---|
| 599 | btContactSolverInfo&    m_solverInfo; | 
|---|
| 600 | btConstraintSolver*             m_solver; | 
|---|
| 601 | btTypedConstraint**             m_sortedConstraints; | 
|---|
| 602 | int                                             m_numConstraints; | 
|---|
| 603 | btIDebugDraw*                   m_debugDrawer; | 
|---|
| 604 | btStackAlloc*                   m_stackAlloc; | 
|---|
| 605 | btDispatcher*                   m_dispatcher; | 
|---|
| 606 |  | 
|---|
| 607 | InplaceSolverIslandCallback( | 
|---|
| 608 | btContactSolverInfo& solverInfo, | 
|---|
| 609 | btConstraintSolver*     solver, | 
|---|
| 610 | btTypedConstraint** sortedConstraints, | 
|---|
| 611 | int     numConstraints, | 
|---|
| 612 | btIDebugDraw*   debugDrawer, | 
|---|
| 613 | btStackAlloc*                   stackAlloc, | 
|---|
| 614 | btDispatcher* dispatcher) | 
|---|
| 615 | :m_solverInfo(solverInfo), | 
|---|
| 616 | m_solver(solver), | 
|---|
| 617 | m_sortedConstraints(sortedConstraints), | 
|---|
| 618 | m_numConstraints(numConstraints), | 
|---|
| 619 | m_debugDrawer(debugDrawer), | 
|---|
| 620 | m_stackAlloc(stackAlloc), | 
|---|
| 621 | m_dispatcher(dispatcher) | 
|---|
| 622 | { | 
|---|
| 623 |  | 
|---|
| 624 | } | 
|---|
| 625 |  | 
|---|
| 626 | InplaceSolverIslandCallback& operator=(InplaceSolverIslandCallback& other) | 
|---|
| 627 | { | 
|---|
| 628 | btAssert(0); | 
|---|
| 629 | (void)other; | 
|---|
| 630 | return *this; | 
|---|
| 631 | } | 
|---|
| 632 | virtual void    ProcessIsland(btCollisionObject** bodies,int numBodies,btPersistentManifold**   manifolds,int numManifolds, int islandId) | 
|---|
| 633 | { | 
|---|
| 634 | if (islandId<0) | 
|---|
| 635 | { | 
|---|
| 636 | if (numManifolds + m_numConstraints) | 
|---|
| 637 | { | 
|---|
| 638 | ///we don't split islands, so all constraints/contact manifolds/bodies are passed into the solver regardless the island id | 
|---|
| 639 | m_solver->solveGroup( bodies,numBodies,manifolds, numManifolds,&m_sortedConstraints[0],m_numConstraints,m_solverInfo,m_debugDrawer,m_stackAlloc,m_dispatcher); | 
|---|
| 640 | } | 
|---|
| 641 | } else | 
|---|
| 642 | { | 
|---|
| 643 | //also add all non-contact constraints/joints for this island | 
|---|
| 644 | btTypedConstraint** startConstraint = 0; | 
|---|
| 645 | int numCurConstraints = 0; | 
|---|
| 646 | int i; | 
|---|
| 647 |  | 
|---|
| 648 | //find the first constraint for this island | 
|---|
| 649 | for (i=0;i<m_numConstraints;i++) | 
|---|
| 650 | { | 
|---|
| 651 | if (btGetConstraintIslandId(m_sortedConstraints[i]) == islandId) | 
|---|
| 652 | { | 
|---|
| 653 | startConstraint = &m_sortedConstraints[i]; | 
|---|
| 654 | break; | 
|---|
| 655 | } | 
|---|
| 656 | } | 
|---|
| 657 | //count the number of constraints in this island | 
|---|
| 658 | for (;i<m_numConstraints;i++) | 
|---|
| 659 | { | 
|---|
| 660 | if (btGetConstraintIslandId(m_sortedConstraints[i]) == islandId) | 
|---|
| 661 | { | 
|---|
| 662 | numCurConstraints++; | 
|---|
| 663 | } | 
|---|
| 664 | } | 
|---|
| 665 |  | 
|---|
| 666 | ///only call solveGroup if there is some work: avoid virtual function call, its overhead can be excessive | 
|---|
| 667 | if (numManifolds + numCurConstraints) | 
|---|
| 668 | { | 
|---|
| 669 | m_solver->solveGroup( bodies,numBodies,manifolds, numManifolds,startConstraint,numCurConstraints,m_solverInfo,m_debugDrawer,m_stackAlloc,m_dispatcher); | 
|---|
| 670 | } | 
|---|
| 671 |  | 
|---|
| 672 | } | 
|---|
| 673 | } | 
|---|
| 674 |  | 
|---|
| 675 | }; | 
|---|
| 676 |  | 
|---|
| 677 | //sorted version of all btTypedConstraint, based on islandId | 
|---|
| 678 | btAlignedObjectArray<btTypedConstraint*>        sortedConstraints; | 
|---|
| 679 | sortedConstraints.resize( m_constraints.size()); | 
|---|
| 680 | int i; | 
|---|
| 681 | for (i=0;i<getNumConstraints();i++) | 
|---|
| 682 | { | 
|---|
| 683 | sortedConstraints[i] = m_constraints[i]; | 
|---|
| 684 | } | 
|---|
| 685 |  | 
|---|
| 686 | //      btAssert(0); | 
|---|
| 687 |  | 
|---|
| 688 |  | 
|---|
| 689 |  | 
|---|
| 690 | sortedConstraints.quickSort(btSortConstraintOnIslandPredicate()); | 
|---|
| 691 |  | 
|---|
| 692 | btTypedConstraint** constraintsPtr = getNumConstraints() ? &sortedConstraints[0] : 0; | 
|---|
| 693 |  | 
|---|
| 694 | InplaceSolverIslandCallback     solverCallback( solverInfo,     m_constraintSolver, constraintsPtr,sortedConstraints.size(),    m_debugDrawer,m_stackAlloc,m_dispatcher1); | 
|---|
| 695 |  | 
|---|
| 696 | m_constraintSolver->prepareSolve(getCollisionWorld()->getNumCollisionObjects(), getCollisionWorld()->getDispatcher()->getNumManifolds()); | 
|---|
| 697 |  | 
|---|
| 698 | /// solve all the constraints for this island | 
|---|
| 699 | m_islandManager->buildAndProcessIslands(getCollisionWorld()->getDispatcher(),getCollisionWorld(),&solverCallback); | 
|---|
| 700 |  | 
|---|
| 701 | m_constraintSolver->allSolved(solverInfo, m_debugDrawer, m_stackAlloc); | 
|---|
| 702 | } | 
|---|
| 703 |  | 
|---|
| 704 |  | 
|---|
| 705 |  | 
|---|
| 706 |  | 
|---|
| 707 | void    btDiscreteDynamicsWorld::calculateSimulationIslands() | 
|---|
| 708 | { | 
|---|
| 709 | BT_PROFILE("calculateSimulationIslands"); | 
|---|
| 710 |  | 
|---|
| 711 | getSimulationIslandManager()->updateActivationState(getCollisionWorld(),getCollisionWorld()->getDispatcher()); | 
|---|
| 712 |  | 
|---|
| 713 | { | 
|---|
| 714 | int i; | 
|---|
| 715 | int numConstraints = int(m_constraints.size()); | 
|---|
| 716 | for (i=0;i< numConstraints ; i++ ) | 
|---|
| 717 | { | 
|---|
| 718 | btTypedConstraint* constraint = m_constraints[i]; | 
|---|
| 719 |  | 
|---|
| 720 | const btRigidBody* colObj0 = &constraint->getRigidBodyA(); | 
|---|
| 721 | const btRigidBody* colObj1 = &constraint->getRigidBodyB(); | 
|---|
| 722 |  | 
|---|
| 723 | if (((colObj0) && (!(colObj0)->isStaticOrKinematicObject())) && | 
|---|
| 724 | ((colObj1) && (!(colObj1)->isStaticOrKinematicObject()))) | 
|---|
| 725 | { | 
|---|
| 726 | if (colObj0->isActive() || colObj1->isActive()) | 
|---|
| 727 | { | 
|---|
| 728 |  | 
|---|
| 729 | getSimulationIslandManager()->getUnionFind().unite((colObj0)->getIslandTag(), | 
|---|
| 730 | (colObj1)->getIslandTag()); | 
|---|
| 731 | } | 
|---|
| 732 | } | 
|---|
| 733 | } | 
|---|
| 734 | } | 
|---|
| 735 |  | 
|---|
| 736 | //Store the island id in each body | 
|---|
| 737 | getSimulationIslandManager()->storeIslandActivationState(getCollisionWorld()); | 
|---|
| 738 |  | 
|---|
| 739 |  | 
|---|
| 740 | } | 
|---|
| 741 |  | 
|---|
| 742 |  | 
|---|
| 743 | #include "BulletCollision/BroadphaseCollision/btCollisionAlgorithm.h" | 
|---|
| 744 |  | 
|---|
| 745 | class btClosestNotMeConvexResultCallback : public btCollisionWorld::ClosestConvexResultCallback | 
|---|
| 746 | { | 
|---|
| 747 | btCollisionObject* m_me; | 
|---|
| 748 | btScalar m_allowedPenetration; | 
|---|
| 749 | btOverlappingPairCache* m_pairCache; | 
|---|
| 750 | btDispatcher* m_dispatcher; | 
|---|
| 751 |  | 
|---|
| 752 |  | 
|---|
| 753 | public: | 
|---|
| 754 | btClosestNotMeConvexResultCallback (btCollisionObject* me,const btVector3& fromA,const btVector3& toA,btOverlappingPairCache* pairCache,btDispatcher* dispatcher) : | 
|---|
| 755 | btCollisionWorld::ClosestConvexResultCallback(fromA,toA), | 
|---|
| 756 | m_allowedPenetration(0.0f), | 
|---|
| 757 | m_me(me), | 
|---|
| 758 | m_pairCache(pairCache), | 
|---|
| 759 | m_dispatcher(dispatcher) | 
|---|
| 760 | { | 
|---|
| 761 | } | 
|---|
| 762 |  | 
|---|
| 763 | virtual btScalar addSingleResult(btCollisionWorld::LocalConvexResult& convexResult,bool normalInWorldSpace) | 
|---|
| 764 | { | 
|---|
| 765 | if (convexResult.m_hitCollisionObject == m_me) | 
|---|
| 766 | return 1.0f; | 
|---|
| 767 |  | 
|---|
| 768 | //ignore result if there is no contact response | 
|---|
| 769 | if(!convexResult.m_hitCollisionObject->hasContactResponse()) | 
|---|
| 770 | return 1.0f; | 
|---|
| 771 |  | 
|---|
| 772 | btVector3 linVelA,linVelB; | 
|---|
| 773 | linVelA = m_convexToWorld-m_convexFromWorld; | 
|---|
| 774 | linVelB = btVector3(0,0,0);//toB.getOrigin()-fromB.getOrigin(); | 
|---|
| 775 |  | 
|---|
| 776 | btVector3 relativeVelocity = (linVelA-linVelB); | 
|---|
| 777 | //don't report time of impact for motion away from the contact normal (or causes minor penetration) | 
|---|
| 778 | if (convexResult.m_hitNormalLocal.dot(relativeVelocity)>=-m_allowedPenetration) | 
|---|
| 779 | return 1.f; | 
|---|
| 780 |  | 
|---|
| 781 | return ClosestConvexResultCallback::addSingleResult (convexResult, normalInWorldSpace); | 
|---|
| 782 | } | 
|---|
| 783 |  | 
|---|
| 784 | virtual bool needsCollision(btBroadphaseProxy* proxy0) const | 
|---|
| 785 | { | 
|---|
| 786 | //don't collide with itself | 
|---|
| 787 | if (proxy0->m_clientObject == m_me) | 
|---|
| 788 | return false; | 
|---|
| 789 |  | 
|---|
| 790 | ///don't do CCD when the collision filters are not matching | 
|---|
| 791 | if (!ClosestConvexResultCallback::needsCollision(proxy0)) | 
|---|
| 792 | return false; | 
|---|
| 793 |  | 
|---|
| 794 | btCollisionObject* otherObj = (btCollisionObject*) proxy0->m_clientObject; | 
|---|
| 795 |  | 
|---|
| 796 | //call needsResponse, see http://code.google.com/p/bullet/issues/detail?id=179 | 
|---|
| 797 | if (m_dispatcher->needsResponse(m_me,otherObj)) | 
|---|
| 798 | { | 
|---|
| 799 | ///don't do CCD when there are already contact points (touching contact/penetration) | 
|---|
| 800 | btAlignedObjectArray<btPersistentManifold*> manifoldArray; | 
|---|
| 801 | btBroadphasePair* collisionPair = m_pairCache->findPair(m_me->getBroadphaseHandle(),proxy0); | 
|---|
| 802 | if (collisionPair) | 
|---|
| 803 | { | 
|---|
| 804 | if (collisionPair->m_algorithm) | 
|---|
| 805 | { | 
|---|
| 806 | manifoldArray.resize(0); | 
|---|
| 807 | collisionPair->m_algorithm->getAllContactManifolds(manifoldArray); | 
|---|
| 808 | for (int j=0;j<manifoldArray.size();j++) | 
|---|
| 809 | { | 
|---|
| 810 | btPersistentManifold* manifold = manifoldArray[j]; | 
|---|
| 811 | if (manifold->getNumContacts()>0) | 
|---|
| 812 | return false; | 
|---|
| 813 | } | 
|---|
| 814 | } | 
|---|
| 815 | } | 
|---|
| 816 | } | 
|---|
| 817 | return true; | 
|---|
| 818 | } | 
|---|
| 819 |  | 
|---|
| 820 |  | 
|---|
| 821 | }; | 
|---|
| 822 |  | 
|---|
| 823 | ///internal debugging variable. this value shouldn't be too high | 
|---|
| 824 | int gNumClampedCcdMotions=0; | 
|---|
| 825 |  | 
|---|
| 826 | //#include "stdio.h" | 
|---|
| 827 | void    btDiscreteDynamicsWorld::integrateTransforms(btScalar timeStep) | 
|---|
| 828 | { | 
|---|
| 829 | BT_PROFILE("integrateTransforms"); | 
|---|
| 830 | btTransform predictedTrans; | 
|---|
| 831 | for ( int i=0;i<m_collisionObjects.size();i++) | 
|---|
| 832 | { | 
|---|
| 833 | btCollisionObject* colObj = m_collisionObjects[i]; | 
|---|
| 834 | btRigidBody* body = btRigidBody::upcast(colObj); | 
|---|
| 835 | if (body) | 
|---|
| 836 | { | 
|---|
| 837 | body->setHitFraction(1.f); | 
|---|
| 838 |  | 
|---|
| 839 | if (body->isActive() && (!body->isStaticOrKinematicObject())) | 
|---|
| 840 | { | 
|---|
| 841 | body->predictIntegratedTransform(timeStep, predictedTrans); | 
|---|
| 842 | btScalar squareMotion = (predictedTrans.getOrigin()-body->getWorldTransform().getOrigin()).length2(); | 
|---|
| 843 |  | 
|---|
| 844 | if (body->getCcdSquareMotionThreshold() && body->getCcdSquareMotionThreshold() < squareMotion) | 
|---|
| 845 | { | 
|---|
| 846 | BT_PROFILE("CCD motion clamping"); | 
|---|
| 847 | if (body->getCollisionShape()->isConvex()) | 
|---|
| 848 | { | 
|---|
| 849 | gNumClampedCcdMotions++; | 
|---|
| 850 |  | 
|---|
| 851 | btClosestNotMeConvexResultCallback sweepResults(body,body->getWorldTransform().getOrigin(),predictedTrans.getOrigin(),getBroadphase()->getOverlappingPairCache(),getDispatcher()); | 
|---|
| 852 | btConvexShape* convexShape = static_cast<btConvexShape*>(body->getCollisionShape()); | 
|---|
| 853 | btSphereShape tmpSphere(body->getCcdSweptSphereRadius());//btConvexShape* convexShape = static_cast<btConvexShape*>(body->getCollisionShape()); | 
|---|
| 854 |  | 
|---|
| 855 | sweepResults.m_collisionFilterGroup = body->getBroadphaseProxy()->m_collisionFilterGroup; | 
|---|
| 856 | sweepResults.m_collisionFilterMask  = body->getBroadphaseProxy()->m_collisionFilterMask; | 
|---|
| 857 |  | 
|---|
| 858 | convexSweepTest(&tmpSphere,body->getWorldTransform(),predictedTrans,sweepResults); | 
|---|
| 859 | if (sweepResults.hasHit() && (sweepResults.m_closestHitFraction < 1.f)) | 
|---|
| 860 | { | 
|---|
| 861 | body->setHitFraction(sweepResults.m_closestHitFraction); | 
|---|
| 862 | body->predictIntegratedTransform(timeStep*body->getHitFraction(), predictedTrans); | 
|---|
| 863 | body->setHitFraction(0.f); | 
|---|
| 864 | //                                                      printf("clamped integration to hit fraction = %f\n",fraction); | 
|---|
| 865 | } | 
|---|
| 866 | } | 
|---|
| 867 | } | 
|---|
| 868 |  | 
|---|
| 869 | body->proceedToTransform( predictedTrans); | 
|---|
| 870 | } | 
|---|
| 871 | } | 
|---|
| 872 | } | 
|---|
| 873 | } | 
|---|
| 874 |  | 
|---|
| 875 |  | 
|---|
| 876 |  | 
|---|
| 877 |  | 
|---|
| 878 |  | 
|---|
| 879 | void    btDiscreteDynamicsWorld::predictUnconstraintMotion(btScalar timeStep) | 
|---|
| 880 | { | 
|---|
| 881 | BT_PROFILE("predictUnconstraintMotion"); | 
|---|
| 882 | for ( int i=0;i<m_collisionObjects.size();i++) | 
|---|
| 883 | { | 
|---|
| 884 | btCollisionObject* colObj = m_collisionObjects[i]; | 
|---|
| 885 | btRigidBody* body = btRigidBody::upcast(colObj); | 
|---|
| 886 | if (body) | 
|---|
| 887 | { | 
|---|
| 888 | if (!body->isStaticOrKinematicObject()) | 
|---|
| 889 | { | 
|---|
| 890 |  | 
|---|
| 891 | body->integrateVelocities( timeStep); | 
|---|
| 892 | //damping | 
|---|
| 893 | body->applyDamping(timeStep); | 
|---|
| 894 |  | 
|---|
| 895 | body->predictIntegratedTransform(timeStep,body->getInterpolationWorldTransform()); | 
|---|
| 896 | } | 
|---|
| 897 | } | 
|---|
| 898 | } | 
|---|
| 899 | } | 
|---|
| 900 |  | 
|---|
| 901 |  | 
|---|
| 902 | void    btDiscreteDynamicsWorld::startProfiling(btScalar timeStep) | 
|---|
| 903 | { | 
|---|
| 904 | (void)timeStep; | 
|---|
| 905 |  | 
|---|
| 906 | #ifndef BT_NO_PROFILE | 
|---|
| 907 | CProfileManager::Reset(); | 
|---|
| 908 | #endif //BT_NO_PROFILE | 
|---|
| 909 |  | 
|---|
| 910 | } | 
|---|
| 911 |  | 
|---|
| 912 |  | 
|---|
| 913 |  | 
|---|
| 914 |  | 
|---|
| 915 |  | 
|---|
| 916 |  | 
|---|
| 917 | class DebugDrawcallback : public btTriangleCallback, public btInternalTriangleIndexCallback | 
|---|
| 918 | { | 
|---|
| 919 | btIDebugDraw*   m_debugDrawer; | 
|---|
| 920 | btVector3       m_color; | 
|---|
| 921 | btTransform     m_worldTrans; | 
|---|
| 922 |  | 
|---|
| 923 | public: | 
|---|
| 924 |  | 
|---|
| 925 | DebugDrawcallback(btIDebugDraw* debugDrawer,const btTransform& worldTrans,const btVector3& color) : | 
|---|
| 926 | m_debugDrawer(debugDrawer), | 
|---|
| 927 | m_color(color), | 
|---|
| 928 | m_worldTrans(worldTrans) | 
|---|
| 929 | { | 
|---|
| 930 | } | 
|---|
| 931 |  | 
|---|
| 932 | virtual void internalProcessTriangleIndex(btVector3* triangle,int partId,int  triangleIndex) | 
|---|
| 933 | { | 
|---|
| 934 | processTriangle(triangle,partId,triangleIndex); | 
|---|
| 935 | } | 
|---|
| 936 |  | 
|---|
| 937 | virtual void processTriangle(btVector3* triangle,int partId, int triangleIndex) | 
|---|
| 938 | { | 
|---|
| 939 | (void)partId; | 
|---|
| 940 | (void)triangleIndex; | 
|---|
| 941 |  | 
|---|
| 942 | btVector3 wv0,wv1,wv2; | 
|---|
| 943 | wv0 = m_worldTrans*triangle[0]; | 
|---|
| 944 | wv1 = m_worldTrans*triangle[1]; | 
|---|
| 945 | wv2 = m_worldTrans*triangle[2]; | 
|---|
| 946 | m_debugDrawer->drawLine(wv0,wv1,m_color); | 
|---|
| 947 | m_debugDrawer->drawLine(wv1,wv2,m_color); | 
|---|
| 948 | m_debugDrawer->drawLine(wv2,wv0,m_color); | 
|---|
| 949 | } | 
|---|
| 950 | }; | 
|---|
| 951 |  | 
|---|
| 952 | void btDiscreteDynamicsWorld::debugDrawSphere(btScalar radius, const btTransform& transform, const btVector3& color) | 
|---|
| 953 | { | 
|---|
| 954 | btVector3 start = transform.getOrigin(); | 
|---|
| 955 |  | 
|---|
| 956 | const btVector3 xoffs = transform.getBasis() * btVector3(radius,0,0); | 
|---|
| 957 | const btVector3 yoffs = transform.getBasis() * btVector3(0,radius,0); | 
|---|
| 958 | const btVector3 zoffs = transform.getBasis() * btVector3(0,0,radius); | 
|---|
| 959 |  | 
|---|
| 960 | // XY | 
|---|
| 961 | getDebugDrawer()->drawLine(start-xoffs, start+yoffs, color); | 
|---|
| 962 | getDebugDrawer()->drawLine(start+yoffs, start+xoffs, color); | 
|---|
| 963 | getDebugDrawer()->drawLine(start+xoffs, start-yoffs, color); | 
|---|
| 964 | getDebugDrawer()->drawLine(start-yoffs, start-xoffs, color); | 
|---|
| 965 |  | 
|---|
| 966 | // XZ | 
|---|
| 967 | getDebugDrawer()->drawLine(start-xoffs, start+zoffs, color); | 
|---|
| 968 | getDebugDrawer()->drawLine(start+zoffs, start+xoffs, color); | 
|---|
| 969 | getDebugDrawer()->drawLine(start+xoffs, start-zoffs, color); | 
|---|
| 970 | getDebugDrawer()->drawLine(start-zoffs, start-xoffs, color); | 
|---|
| 971 |  | 
|---|
| 972 | // YZ | 
|---|
| 973 | getDebugDrawer()->drawLine(start-yoffs, start+zoffs, color); | 
|---|
| 974 | getDebugDrawer()->drawLine(start+zoffs, start+yoffs, color); | 
|---|
| 975 | getDebugDrawer()->drawLine(start+yoffs, start-zoffs, color); | 
|---|
| 976 | getDebugDrawer()->drawLine(start-zoffs, start-yoffs, color); | 
|---|
| 977 | } | 
|---|
| 978 |  | 
|---|
| 979 | void btDiscreteDynamicsWorld::debugDrawObject(const btTransform& worldTransform, const btCollisionShape* shape, const btVector3& color) | 
|---|
| 980 | { | 
|---|
| 981 | // Draw a small simplex at the center of the object | 
|---|
| 982 | { | 
|---|
| 983 | btVector3 start = worldTransform.getOrigin(); | 
|---|
| 984 | getDebugDrawer()->drawLine(start, start+worldTransform.getBasis() * btVector3(1,0,0), btVector3(1,0,0)); | 
|---|
| 985 | getDebugDrawer()->drawLine(start, start+worldTransform.getBasis() * btVector3(0,1,0), btVector3(0,1,0)); | 
|---|
| 986 | getDebugDrawer()->drawLine(start, start+worldTransform.getBasis() * btVector3(0,0,1), btVector3(0,0,1)); | 
|---|
| 987 | } | 
|---|
| 988 |  | 
|---|
| 989 | if (shape->getShapeType() == COMPOUND_SHAPE_PROXYTYPE) | 
|---|
| 990 | { | 
|---|
| 991 | const btCompoundShape* compoundShape = static_cast<const btCompoundShape*>(shape); | 
|---|
| 992 | for (int i=compoundShape->getNumChildShapes()-1;i>=0;i--) | 
|---|
| 993 | { | 
|---|
| 994 | btTransform childTrans = compoundShape->getChildTransform(i); | 
|---|
| 995 | const btCollisionShape* colShape = compoundShape->getChildShape(i); | 
|---|
| 996 | debugDrawObject(worldTransform*childTrans,colShape,color); | 
|---|
| 997 | } | 
|---|
| 998 |  | 
|---|
| 999 | } else | 
|---|
| 1000 | { | 
|---|
| 1001 | switch (shape->getShapeType()) | 
|---|
| 1002 | { | 
|---|
| 1003 |  | 
|---|
| 1004 | case SPHERE_SHAPE_PROXYTYPE: | 
|---|
| 1005 | { | 
|---|
| 1006 | const btSphereShape* sphereShape = static_cast<const btSphereShape*>(shape); | 
|---|
| 1007 | btScalar radius = sphereShape->getMargin();//radius doesn't include the margin, so draw with margin | 
|---|
| 1008 |  | 
|---|
| 1009 | debugDrawSphere(radius, worldTransform, color); | 
|---|
| 1010 | break; | 
|---|
| 1011 | } | 
|---|
| 1012 | case MULTI_SPHERE_SHAPE_PROXYTYPE: | 
|---|
| 1013 | { | 
|---|
| 1014 | const btMultiSphereShape* multiSphereShape = static_cast<const btMultiSphereShape*>(shape); | 
|---|
| 1015 |  | 
|---|
| 1016 | for (int i = multiSphereShape->getSphereCount()-1; i>=0;i--) | 
|---|
| 1017 | { | 
|---|
| 1018 | btTransform childTransform = worldTransform; | 
|---|
| 1019 | childTransform.getOrigin() += multiSphereShape->getSpherePosition(i); | 
|---|
| 1020 | debugDrawSphere(multiSphereShape->getSphereRadius(i), childTransform, color); | 
|---|
| 1021 | } | 
|---|
| 1022 |  | 
|---|
| 1023 | break; | 
|---|
| 1024 | } | 
|---|
| 1025 | case CAPSULE_SHAPE_PROXYTYPE: | 
|---|
| 1026 | { | 
|---|
| 1027 | const btCapsuleShape* capsuleShape = static_cast<const btCapsuleShape*>(shape); | 
|---|
| 1028 |  | 
|---|
| 1029 | btScalar radius = capsuleShape->getRadius(); | 
|---|
| 1030 | btScalar halfHeight = capsuleShape->getHalfHeight(); | 
|---|
| 1031 |  | 
|---|
| 1032 | int upAxis = capsuleShape->getUpAxis(); | 
|---|
| 1033 |  | 
|---|
| 1034 |  | 
|---|
| 1035 | btVector3 capStart(0.f,0.f,0.f); | 
|---|
| 1036 | capStart[upAxis] = -halfHeight; | 
|---|
| 1037 |  | 
|---|
| 1038 | btVector3 capEnd(0.f,0.f,0.f); | 
|---|
| 1039 | capEnd[upAxis] = halfHeight; | 
|---|
| 1040 |  | 
|---|
| 1041 | // Draw the ends | 
|---|
| 1042 | { | 
|---|
| 1043 |  | 
|---|
| 1044 | btTransform childTransform = worldTransform; | 
|---|
| 1045 | childTransform.getOrigin() = worldTransform * capStart; | 
|---|
| 1046 | debugDrawSphere(radius, childTransform, color); | 
|---|
| 1047 | } | 
|---|
| 1048 |  | 
|---|
| 1049 | { | 
|---|
| 1050 | btTransform childTransform = worldTransform; | 
|---|
| 1051 | childTransform.getOrigin() = worldTransform * capEnd; | 
|---|
| 1052 | debugDrawSphere(radius, childTransform, color); | 
|---|
| 1053 | } | 
|---|
| 1054 |  | 
|---|
| 1055 | // Draw some additional lines | 
|---|
| 1056 | btVector3 start = worldTransform.getOrigin(); | 
|---|
| 1057 |  | 
|---|
| 1058 |  | 
|---|
| 1059 | capStart[(upAxis+1)%3] = radius; | 
|---|
| 1060 | capEnd[(upAxis+1)%3] = radius; | 
|---|
| 1061 | getDebugDrawer()->drawLine(start+worldTransform.getBasis() * capStart,start+worldTransform.getBasis() * capEnd, color); | 
|---|
| 1062 | capStart[(upAxis+1)%3] = -radius; | 
|---|
| 1063 | capEnd[(upAxis+1)%3] = -radius; | 
|---|
| 1064 | getDebugDrawer()->drawLine(start+worldTransform.getBasis() * capStart,start+worldTransform.getBasis() * capEnd, color); | 
|---|
| 1065 |  | 
|---|
| 1066 | capStart[(upAxis+1)%3] = 0.f; | 
|---|
| 1067 | capEnd[(upAxis+1)%3] = 0.f; | 
|---|
| 1068 |  | 
|---|
| 1069 | capStart[(upAxis+2)%3] = radius; | 
|---|
| 1070 | capEnd[(upAxis+2)%3] = radius; | 
|---|
| 1071 | getDebugDrawer()->drawLine(start+worldTransform.getBasis() * capStart,start+worldTransform.getBasis() * capEnd, color); | 
|---|
| 1072 | capStart[(upAxis+2)%3] = -radius; | 
|---|
| 1073 | capEnd[(upAxis+2)%3] = -radius; | 
|---|
| 1074 | getDebugDrawer()->drawLine(start+worldTransform.getBasis() * capStart,start+worldTransform.getBasis() * capEnd, color); | 
|---|
| 1075 |  | 
|---|
| 1076 |  | 
|---|
| 1077 | break; | 
|---|
| 1078 | } | 
|---|
| 1079 | case CONE_SHAPE_PROXYTYPE: | 
|---|
| 1080 | { | 
|---|
| 1081 | const btConeShape* coneShape = static_cast<const btConeShape*>(shape); | 
|---|
| 1082 | btScalar radius = coneShape->getRadius();//+coneShape->getMargin(); | 
|---|
| 1083 | btScalar height = coneShape->getHeight();//+coneShape->getMargin(); | 
|---|
| 1084 | btVector3 start = worldTransform.getOrigin(); | 
|---|
| 1085 |  | 
|---|
| 1086 | int upAxis= coneShape->getConeUpIndex(); | 
|---|
| 1087 |  | 
|---|
| 1088 |  | 
|---|
| 1089 | btVector3       offsetHeight(0,0,0); | 
|---|
| 1090 | offsetHeight[upAxis] = height * btScalar(0.5); | 
|---|
| 1091 | btVector3       offsetRadius(0,0,0); | 
|---|
| 1092 | offsetRadius[(upAxis+1)%3] = radius; | 
|---|
| 1093 | btVector3       offset2Radius(0,0,0); | 
|---|
| 1094 | offset2Radius[(upAxis+2)%3] = radius; | 
|---|
| 1095 |  | 
|---|
| 1096 | getDebugDrawer()->drawLine(start+worldTransform.getBasis() * (offsetHeight),start+worldTransform.getBasis() * (-offsetHeight+offsetRadius),color); | 
|---|
| 1097 | getDebugDrawer()->drawLine(start+worldTransform.getBasis() * (offsetHeight),start+worldTransform.getBasis() * (-offsetHeight-offsetRadius),color); | 
|---|
| 1098 | getDebugDrawer()->drawLine(start+worldTransform.getBasis() * (offsetHeight),start+worldTransform.getBasis() * (-offsetHeight+offset2Radius),color); | 
|---|
| 1099 | getDebugDrawer()->drawLine(start+worldTransform.getBasis() * (offsetHeight),start+worldTransform.getBasis() * (-offsetHeight-offset2Radius),color); | 
|---|
| 1100 |  | 
|---|
| 1101 |  | 
|---|
| 1102 |  | 
|---|
| 1103 | break; | 
|---|
| 1104 |  | 
|---|
| 1105 | } | 
|---|
| 1106 | case CYLINDER_SHAPE_PROXYTYPE: | 
|---|
| 1107 | { | 
|---|
| 1108 | const btCylinderShape* cylinder = static_cast<const btCylinderShape*>(shape); | 
|---|
| 1109 | int upAxis = cylinder->getUpAxis(); | 
|---|
| 1110 | btScalar radius = cylinder->getRadius(); | 
|---|
| 1111 | btScalar halfHeight = cylinder->getHalfExtentsWithMargin()[upAxis]; | 
|---|
| 1112 | btVector3 start = worldTransform.getOrigin(); | 
|---|
| 1113 | btVector3       offsetHeight(0,0,0); | 
|---|
| 1114 | offsetHeight[upAxis] = halfHeight; | 
|---|
| 1115 | btVector3       offsetRadius(0,0,0); | 
|---|
| 1116 | offsetRadius[(upAxis+1)%3] = radius; | 
|---|
| 1117 | getDebugDrawer()->drawLine(start+worldTransform.getBasis() * (offsetHeight+offsetRadius),start+worldTransform.getBasis() * (-offsetHeight+offsetRadius),color); | 
|---|
| 1118 | getDebugDrawer()->drawLine(start+worldTransform.getBasis() * (offsetHeight-offsetRadius),start+worldTransform.getBasis() * (-offsetHeight-offsetRadius),color); | 
|---|
| 1119 | break; | 
|---|
| 1120 | } | 
|---|
| 1121 |  | 
|---|
| 1122 | case STATIC_PLANE_PROXYTYPE: | 
|---|
| 1123 | { | 
|---|
| 1124 | const btStaticPlaneShape* staticPlaneShape = static_cast<const btStaticPlaneShape*>(shape); | 
|---|
| 1125 | btScalar planeConst = staticPlaneShape->getPlaneConstant(); | 
|---|
| 1126 | const btVector3& planeNormal = staticPlaneShape->getPlaneNormal(); | 
|---|
| 1127 | btVector3 planeOrigin = planeNormal * planeConst; | 
|---|
| 1128 | btVector3 vec0,vec1; | 
|---|
| 1129 | btPlaneSpace1(planeNormal,vec0,vec1); | 
|---|
| 1130 | btScalar vecLen = 100.f; | 
|---|
| 1131 | btVector3 pt0 = planeOrigin + vec0*vecLen; | 
|---|
| 1132 | btVector3 pt1 = planeOrigin - vec0*vecLen; | 
|---|
| 1133 | btVector3 pt2 = planeOrigin + vec1*vecLen; | 
|---|
| 1134 | btVector3 pt3 = planeOrigin - vec1*vecLen; | 
|---|
| 1135 | getDebugDrawer()->drawLine(worldTransform*pt0,worldTransform*pt1,color); | 
|---|
| 1136 | getDebugDrawer()->drawLine(worldTransform*pt2,worldTransform*pt3,color); | 
|---|
| 1137 | break; | 
|---|
| 1138 |  | 
|---|
| 1139 | } | 
|---|
| 1140 | default: | 
|---|
| 1141 | { | 
|---|
| 1142 |  | 
|---|
| 1143 | if (shape->isConcave()) | 
|---|
| 1144 | { | 
|---|
| 1145 | btConcaveShape* concaveMesh = (btConcaveShape*) shape; | 
|---|
| 1146 |  | 
|---|
| 1147 | ///@todo pass camera, for some culling? no -> we are not a graphics lib | 
|---|
| 1148 | btVector3 aabbMax(btScalar(1e30),btScalar(1e30),btScalar(1e30)); | 
|---|
| 1149 | btVector3 aabbMin(btScalar(-1e30),btScalar(-1e30),btScalar(-1e30)); | 
|---|
| 1150 |  | 
|---|
| 1151 | DebugDrawcallback drawCallback(getDebugDrawer(),worldTransform,color); | 
|---|
| 1152 | concaveMesh->processAllTriangles(&drawCallback,aabbMin,aabbMax); | 
|---|
| 1153 |  | 
|---|
| 1154 | } | 
|---|
| 1155 |  | 
|---|
| 1156 | if (shape->getShapeType() == CONVEX_TRIANGLEMESH_SHAPE_PROXYTYPE) | 
|---|
| 1157 | { | 
|---|
| 1158 | btConvexTriangleMeshShape* convexMesh = (btConvexTriangleMeshShape*) shape; | 
|---|
| 1159 | //todo: pass camera for some culling | 
|---|
| 1160 | btVector3 aabbMax(btScalar(1e30),btScalar(1e30),btScalar(1e30)); | 
|---|
| 1161 | btVector3 aabbMin(btScalar(-1e30),btScalar(-1e30),btScalar(-1e30)); | 
|---|
| 1162 | //DebugDrawcallback drawCallback; | 
|---|
| 1163 | DebugDrawcallback drawCallback(getDebugDrawer(),worldTransform,color); | 
|---|
| 1164 | convexMesh->getMeshInterface()->InternalProcessAllTriangles(&drawCallback,aabbMin,aabbMax); | 
|---|
| 1165 | } | 
|---|
| 1166 |  | 
|---|
| 1167 |  | 
|---|
| 1168 | /// for polyhedral shapes | 
|---|
| 1169 | if (shape->isPolyhedral()) | 
|---|
| 1170 | { | 
|---|
| 1171 | btPolyhedralConvexShape* polyshape = (btPolyhedralConvexShape*) shape; | 
|---|
| 1172 |  | 
|---|
| 1173 | int i; | 
|---|
| 1174 | for (i=0;i<polyshape->getNumEdges();i++) | 
|---|
| 1175 | { | 
|---|
| 1176 | btVector3 a,b; | 
|---|
| 1177 | polyshape->getEdge(i,a,b); | 
|---|
| 1178 | btVector3 wa = worldTransform * a; | 
|---|
| 1179 | btVector3 wb = worldTransform * b; | 
|---|
| 1180 | getDebugDrawer()->drawLine(wa,wb,color); | 
|---|
| 1181 |  | 
|---|
| 1182 | } | 
|---|
| 1183 |  | 
|---|
| 1184 |  | 
|---|
| 1185 | } | 
|---|
| 1186 | } | 
|---|
| 1187 | } | 
|---|
| 1188 | } | 
|---|
| 1189 | } | 
|---|
| 1190 |  | 
|---|
| 1191 |  | 
|---|
| 1192 | void btDiscreteDynamicsWorld::debugDrawConstraint(btTypedConstraint* constraint) | 
|---|
| 1193 | { | 
|---|
| 1194 | bool drawFrames = (getDebugDrawer()->getDebugMode() & btIDebugDraw::DBG_DrawConstraints) != 0; | 
|---|
| 1195 | bool drawLimits = (getDebugDrawer()->getDebugMode() & btIDebugDraw::DBG_DrawConstraintLimits) != 0; | 
|---|
| 1196 | btScalar dbgDrawSize = constraint->getDbgDrawSize(); | 
|---|
| 1197 | if(dbgDrawSize <= btScalar(0.f)) | 
|---|
| 1198 | { | 
|---|
| 1199 | return; | 
|---|
| 1200 | } | 
|---|
| 1201 |  | 
|---|
| 1202 | switch(constraint->getConstraintType()) | 
|---|
| 1203 | { | 
|---|
| 1204 | case POINT2POINT_CONSTRAINT_TYPE: | 
|---|
| 1205 | { | 
|---|
| 1206 | btPoint2PointConstraint* p2pC = (btPoint2PointConstraint*)constraint; | 
|---|
| 1207 | btTransform tr; | 
|---|
| 1208 | tr.setIdentity(); | 
|---|
| 1209 | btVector3 pivot = p2pC->getPivotInA(); | 
|---|
| 1210 | pivot = p2pC->getRigidBodyA().getCenterOfMassTransform() * pivot; | 
|---|
| 1211 | tr.setOrigin(pivot); | 
|---|
| 1212 | getDebugDrawer()->drawTransform(tr, dbgDrawSize); | 
|---|
| 1213 | // that ideally should draw the same frame | 
|---|
| 1214 | pivot = p2pC->getPivotInB(); | 
|---|
| 1215 | pivot = p2pC->getRigidBodyB().getCenterOfMassTransform() * pivot; | 
|---|
| 1216 | tr.setOrigin(pivot); | 
|---|
| 1217 | if(drawFrames) getDebugDrawer()->drawTransform(tr, dbgDrawSize); | 
|---|
| 1218 | } | 
|---|
| 1219 | break; | 
|---|
| 1220 | case HINGE_CONSTRAINT_TYPE: | 
|---|
| 1221 | { | 
|---|
| 1222 | btHingeConstraint* pHinge = (btHingeConstraint*)constraint; | 
|---|
| 1223 | btTransform tr = pHinge->getRigidBodyA().getCenterOfMassTransform() * pHinge->getAFrame(); | 
|---|
| 1224 | if(drawFrames) getDebugDrawer()->drawTransform(tr, dbgDrawSize); | 
|---|
| 1225 | tr = pHinge->getRigidBodyB().getCenterOfMassTransform() * pHinge->getBFrame(); | 
|---|
| 1226 | if(drawFrames) getDebugDrawer()->drawTransform(tr, dbgDrawSize); | 
|---|
| 1227 | btScalar minAng = pHinge->getLowerLimit(); | 
|---|
| 1228 | btScalar maxAng = pHinge->getUpperLimit(); | 
|---|
| 1229 | if(minAng == maxAng) | 
|---|
| 1230 | { | 
|---|
| 1231 | break; | 
|---|
| 1232 | } | 
|---|
| 1233 | bool drawSect = true; | 
|---|
| 1234 | if(minAng > maxAng) | 
|---|
| 1235 | { | 
|---|
| 1236 | minAng = btScalar(0.f); | 
|---|
| 1237 | maxAng = SIMD_2_PI; | 
|---|
| 1238 | drawSect = false; | 
|---|
| 1239 | } | 
|---|
| 1240 | if(drawLimits) | 
|---|
| 1241 | { | 
|---|
| 1242 | btVector3& center = tr.getOrigin(); | 
|---|
| 1243 | btVector3 normal = tr.getBasis().getColumn(2); | 
|---|
| 1244 | btVector3 axis = tr.getBasis().getColumn(0); | 
|---|
| 1245 | getDebugDrawer()->drawArc(center, normal, axis, dbgDrawSize, dbgDrawSize, minAng, maxAng, btVector3(0,0,0), drawSect); | 
|---|
| 1246 | } | 
|---|
| 1247 | } | 
|---|
| 1248 | break; | 
|---|
| 1249 | case CONETWIST_CONSTRAINT_TYPE: | 
|---|
| 1250 | { | 
|---|
| 1251 | btConeTwistConstraint* pCT = (btConeTwistConstraint*)constraint; | 
|---|
| 1252 | btTransform tr = pCT->getRigidBodyA().getCenterOfMassTransform() * pCT->getAFrame(); | 
|---|
| 1253 | if(drawFrames) getDebugDrawer()->drawTransform(tr, dbgDrawSize); | 
|---|
| 1254 | tr = pCT->getRigidBodyB().getCenterOfMassTransform() * pCT->getBFrame(); | 
|---|
| 1255 | if(drawFrames) getDebugDrawer()->drawTransform(tr, dbgDrawSize); | 
|---|
| 1256 | if(drawLimits) | 
|---|
| 1257 | { | 
|---|
| 1258 | //const btScalar length = btScalar(5); | 
|---|
| 1259 | const btScalar length = dbgDrawSize; | 
|---|
| 1260 | static int nSegments = 8*4; | 
|---|
| 1261 | btScalar fAngleInRadians = btScalar(2.*3.1415926) * (btScalar)(nSegments-1)/btScalar(nSegments); | 
|---|
| 1262 | btVector3 pPrev = pCT->GetPointForAngle(fAngleInRadians, length); | 
|---|
| 1263 | pPrev = tr * pPrev; | 
|---|
| 1264 | for (int i=0; i<nSegments; i++) | 
|---|
| 1265 | { | 
|---|
| 1266 | fAngleInRadians = btScalar(2.*3.1415926) * (btScalar)i/btScalar(nSegments); | 
|---|
| 1267 | btVector3 pCur = pCT->GetPointForAngle(fAngleInRadians, length); | 
|---|
| 1268 | pCur = tr * pCur; | 
|---|
| 1269 | getDebugDrawer()->drawLine(pPrev, pCur, btVector3(0,0,0)); | 
|---|
| 1270 |  | 
|---|
| 1271 | if (i%(nSegments/8) == 0) | 
|---|
| 1272 | getDebugDrawer()->drawLine(tr.getOrigin(), pCur, btVector3(0,0,0)); | 
|---|
| 1273 |  | 
|---|
| 1274 | pPrev = pCur; | 
|---|
| 1275 | } | 
|---|
| 1276 | btScalar tws = pCT->getTwistSpan(); | 
|---|
| 1277 | btScalar twa = pCT->getTwistAngle(); | 
|---|
| 1278 | bool useFrameB = (pCT->getRigidBodyB().getInvMass() > btScalar(0.f)); | 
|---|
| 1279 | if(useFrameB) | 
|---|
| 1280 | { | 
|---|
| 1281 | tr = pCT->getRigidBodyB().getCenterOfMassTransform() * pCT->getBFrame(); | 
|---|
| 1282 | } | 
|---|
| 1283 | else | 
|---|
| 1284 | { | 
|---|
| 1285 | tr = pCT->getRigidBodyA().getCenterOfMassTransform() * pCT->getAFrame(); | 
|---|
| 1286 | } | 
|---|
| 1287 | btVector3 pivot = tr.getOrigin(); | 
|---|
| 1288 | btVector3 normal = tr.getBasis().getColumn(0); | 
|---|
| 1289 | btVector3 axis1 = tr.getBasis().getColumn(1); | 
|---|
| 1290 | getDebugDrawer()->drawArc(pivot, normal, axis1, dbgDrawSize, dbgDrawSize, -twa-tws, -twa+tws, btVector3(0,0,0), true); | 
|---|
| 1291 |  | 
|---|
| 1292 | } | 
|---|
| 1293 | } | 
|---|
| 1294 | break; | 
|---|
| 1295 | case D6_CONSTRAINT_TYPE: | 
|---|
| 1296 | { | 
|---|
| 1297 | btGeneric6DofConstraint* p6DOF = (btGeneric6DofConstraint*)constraint; | 
|---|
| 1298 | btTransform tr = p6DOF->getCalculatedTransformA(); | 
|---|
| 1299 | if(drawFrames) getDebugDrawer()->drawTransform(tr, dbgDrawSize); | 
|---|
| 1300 | tr = p6DOF->getCalculatedTransformB(); | 
|---|
| 1301 | if(drawFrames) getDebugDrawer()->drawTransform(tr, dbgDrawSize); | 
|---|
| 1302 | if(drawLimits) | 
|---|
| 1303 | { | 
|---|
| 1304 | tr = p6DOF->getCalculatedTransformA(); | 
|---|
| 1305 | const btVector3& center = p6DOF->getCalculatedTransformB().getOrigin(); | 
|---|
| 1306 | btVector3 up = tr.getBasis().getColumn(2); | 
|---|
| 1307 | btVector3 axis = tr.getBasis().getColumn(0); | 
|---|
| 1308 | btScalar minTh = p6DOF->getRotationalLimitMotor(1)->m_loLimit; | 
|---|
| 1309 | btScalar maxTh = p6DOF->getRotationalLimitMotor(1)->m_hiLimit; | 
|---|
| 1310 | btScalar minPs = p6DOF->getRotationalLimitMotor(2)->m_loLimit; | 
|---|
| 1311 | btScalar maxPs = p6DOF->getRotationalLimitMotor(2)->m_hiLimit; | 
|---|
| 1312 | getDebugDrawer()->drawSpherePatch(center, up, axis, dbgDrawSize * btScalar(.9f), minTh, maxTh, minPs, maxPs, btVector3(0,0,0)); | 
|---|
| 1313 | axis = tr.getBasis().getColumn(1); | 
|---|
| 1314 | btScalar ay = p6DOF->getAngle(1); | 
|---|
| 1315 | btScalar az = p6DOF->getAngle(2); | 
|---|
| 1316 | btScalar cy = btCos(ay); | 
|---|
| 1317 | btScalar sy = btSin(ay); | 
|---|
| 1318 | btScalar cz = btCos(az); | 
|---|
| 1319 | btScalar sz = btSin(az); | 
|---|
| 1320 | btVector3 ref; | 
|---|
| 1321 | ref[0] = cy*cz*axis[0] + cy*sz*axis[1] - sy*axis[2]; | 
|---|
| 1322 | ref[1] = -sz*axis[0] + cz*axis[1]; | 
|---|
| 1323 | ref[2] = cz*sy*axis[0] + sz*sy*axis[1] + cy*axis[2]; | 
|---|
| 1324 | tr = p6DOF->getCalculatedTransformB(); | 
|---|
| 1325 | btVector3 normal = -tr.getBasis().getColumn(0); | 
|---|
| 1326 | btScalar minFi = p6DOF->getRotationalLimitMotor(0)->m_loLimit; | 
|---|
| 1327 | btScalar maxFi = p6DOF->getRotationalLimitMotor(0)->m_hiLimit; | 
|---|
| 1328 | if(minFi > maxFi) | 
|---|
| 1329 | { | 
|---|
| 1330 | getDebugDrawer()->drawArc(center, normal, ref, dbgDrawSize, dbgDrawSize, -SIMD_PI, SIMD_PI, btVector3(0,0,0), false); | 
|---|
| 1331 | } | 
|---|
| 1332 | else if(minFi < maxFi) | 
|---|
| 1333 | { | 
|---|
| 1334 | getDebugDrawer()->drawArc(center, normal, ref, dbgDrawSize, dbgDrawSize, minFi, maxFi, btVector3(0,0,0), true); | 
|---|
| 1335 | } | 
|---|
| 1336 | tr = p6DOF->getCalculatedTransformA(); | 
|---|
| 1337 | btVector3 bbMin = p6DOF->getTranslationalLimitMotor()->m_lowerLimit; | 
|---|
| 1338 | btVector3 bbMax = p6DOF->getTranslationalLimitMotor()->m_upperLimit; | 
|---|
| 1339 | getDebugDrawer()->drawBox(bbMin, bbMax, tr, btVector3(0,0,0)); | 
|---|
| 1340 | } | 
|---|
| 1341 | } | 
|---|
| 1342 | break; | 
|---|
| 1343 | case SLIDER_CONSTRAINT_TYPE: | 
|---|
| 1344 | { | 
|---|
| 1345 | btSliderConstraint* pSlider = (btSliderConstraint*)constraint; | 
|---|
| 1346 | btTransform tr = pSlider->getCalculatedTransformA(); | 
|---|
| 1347 | if(drawFrames) getDebugDrawer()->drawTransform(tr, dbgDrawSize); | 
|---|
| 1348 | tr = pSlider->getCalculatedTransformB(); | 
|---|
| 1349 | if(drawFrames) getDebugDrawer()->drawTransform(tr, dbgDrawSize); | 
|---|
| 1350 | if(drawLimits) | 
|---|
| 1351 | { | 
|---|
| 1352 | btTransform tr = pSlider->getCalculatedTransformA(); | 
|---|
| 1353 | btVector3 li_min = tr * btVector3(pSlider->getLowerLinLimit(), 0.f, 0.f); | 
|---|
| 1354 | btVector3 li_max = tr * btVector3(pSlider->getUpperLinLimit(), 0.f, 0.f); | 
|---|
| 1355 | getDebugDrawer()->drawLine(li_min, li_max, btVector3(0, 0, 0)); | 
|---|
| 1356 | btVector3 normal = tr.getBasis().getColumn(0); | 
|---|
| 1357 | btVector3 axis = tr.getBasis().getColumn(1); | 
|---|
| 1358 | btScalar a_min = pSlider->getLowerAngLimit(); | 
|---|
| 1359 | btScalar a_max = pSlider->getUpperAngLimit(); | 
|---|
| 1360 | const btVector3& center = pSlider->getCalculatedTransformB().getOrigin(); | 
|---|
| 1361 | getDebugDrawer()->drawArc(center, normal, axis, dbgDrawSize, dbgDrawSize, a_min, a_max, btVector3(0,0,0), true); | 
|---|
| 1362 | } | 
|---|
| 1363 | } | 
|---|
| 1364 | break; | 
|---|
| 1365 | default : | 
|---|
| 1366 | break; | 
|---|
| 1367 | } | 
|---|
| 1368 | return; | 
|---|
| 1369 | } // btDiscreteDynamicsWorld::debugDrawConstraint() | 
|---|
| 1370 |  | 
|---|
| 1371 |  | 
|---|
| 1372 |  | 
|---|
| 1373 |  | 
|---|
| 1374 |  | 
|---|
| 1375 | void    btDiscreteDynamicsWorld::setConstraintSolver(btConstraintSolver* solver) | 
|---|
| 1376 | { | 
|---|
| 1377 | if (m_ownsConstraintSolver) | 
|---|
| 1378 | { | 
|---|
| 1379 | btAlignedFree( m_constraintSolver); | 
|---|
| 1380 | } | 
|---|
| 1381 | m_ownsConstraintSolver = false; | 
|---|
| 1382 | m_constraintSolver = solver; | 
|---|
| 1383 | } | 
|---|
| 1384 |  | 
|---|
| 1385 | btConstraintSolver* btDiscreteDynamicsWorld::getConstraintSolver() | 
|---|
| 1386 | { | 
|---|
| 1387 | return m_constraintSolver; | 
|---|
| 1388 | } | 
|---|
| 1389 |  | 
|---|
| 1390 |  | 
|---|
| 1391 | int             btDiscreteDynamicsWorld::getNumConstraints() const | 
|---|
| 1392 | { | 
|---|
| 1393 | return int(m_constraints.size()); | 
|---|
| 1394 | } | 
|---|
| 1395 | btTypedConstraint* btDiscreteDynamicsWorld::getConstraint(int index) | 
|---|
| 1396 | { | 
|---|
| 1397 | return m_constraints[index]; | 
|---|
| 1398 | } | 
|---|
| 1399 | const btTypedConstraint* btDiscreteDynamicsWorld::getConstraint(int index) const | 
|---|
| 1400 | { | 
|---|
| 1401 | return m_constraints[index]; | 
|---|
| 1402 | } | 
|---|
| 1403 |  | 
|---|
| 1404 |  | 
|---|