Index: bvorbis-1.2.0/doc/Makefile
===================================================================
--- /libvorbis-1.2.0/doc/Makefile	(revision 17)
+++ 	(revision )
@@ -1,667 +1,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# doc/Makefile.  Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-
-pkgdatadir = $(datadir)/libvorbis
-pkglibdir = $(libdir)/libvorbis
-pkgincludedir = $(includedir)/libvorbis
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = x86_64-unknown-linux-gnu
-host_triplet = x86_64-unknown-linux-gnu
-target_triplet = x86_64-unknown-linux-gnu
-subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(docdir)"
-docDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(doc_DATA)
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-ETAGS = etags
-CTAGS = ctags
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run aclocal-1.10
-ALLOCA = 
-AMTAR = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run automake-1.10
-AWK = mawk
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -O20 -ffast-math -D_REENTRANT -fsigned-char  -DUSE_MEMORY_H
-CPP = gcc -E
-CPPFLAGS = 
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEBUG = -g -Wall -W -D_REENTRANT -D__NO_MATH_INLINES -fsigned-char
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO = echo
-ECHO_C = 
-ECHO_N = -n
-ECHO_T = 
-EGREP = /bin/grep -E
-EXEEXT = 
-F77 = 
-FFLAGS = 
-GREP = /bin/grep
-HAVE_PKG_CONFIG = yes
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
-LDFLAGS = 
-LIBOBJS = 
-LIBS = 
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBOBJS = 
-MAINT = 
-MAKEINFO = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run makeinfo
-MKDIR_P = /bin/mkdir -p
-OBJEXT = o
-OGG_CFLAGS =  
-OGG_LIBS = -logg  
-PACKAGE = libvorbis
-PACKAGE_BUGREPORT = 
-PACKAGE_NAME = 
-PACKAGE_STRING = 
-PACKAGE_TARNAME = 
-PACKAGE_VERSION = 
-PATH_SEPARATOR = :
-PDFXMLTEX = 
-PKG_CONFIG = /usr/bin/pkg-config
-PROFILE = -pg -g -O20 -ffast-math -D_REENTRANT -fsigned-char
-RANLIB = ranlib
-SET_MAKE = 
-SHELL = /bin/bash
-STRIP = strip
-VERSION = 1.2.0
-VE_LIB_AGE = 0
-VE_LIB_CURRENT = 2
-VE_LIB_REVISION = 3
-VF_LIB_AGE = 2
-VF_LIB_CURRENT = 5
-VF_LIB_REVISION = 0
-VORBIS_LIBS = -lm
-V_LIB_AGE = 4
-V_LIB_CURRENT = 4
-V_LIB_REVISION = 0
-XSLTPROC = 
-abs_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0/doc
-abs_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0/doc
-abs_top_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0
-abs_top_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 = 
-am__include = include
-am__leading_dot = .
-am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-bindir = ${exec_prefix}/bin
-build = x86_64-unknown-linux-gnu
-build_alias = 
-build_cpu = x86_64
-build_os = linux-gnu
-build_vendor = unknown
-builddir = .
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = x86_64-unknown-linux-gnu
-host_alias = 
-host_cpu = x86_64
-host_os = linux-gnu
-host_vendor = unknown
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = $(SHELL) /home/giles/projects/ghostscript/libvorbis-1.2.0/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-mandir = ${datarootdir}/man
-mkdir_p = /bin/mkdir -p
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-pthread_lib = -lpthread
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-srcdir = .
-sysconfdir = ${prefix}/etc
-target = x86_64-unknown-linux-gnu
-target_alias = 
-target_cpu = x86_64
-target_os = linux-gnu
-target_vendor = unknown
-top_builddir = ..
-top_srcdir = ..
-SUBDIRS = vorbisfile vorbisenc
-
-### all of the static docs, commited to SVN and included as is
-static_docs = \
-	draft-ietf-avt-rtp-vorbis-06.xml \
-	draft-ietf-avt-rtp-vorbis-06.txt \
-	eightphase.png \
-	evenlsp.png \
-	floor1_inverse_dB_table.html \
-	floorval.png \
-	fourphase.png \
-	framing.html \
-	helper.html \
-	index.html \
-	lspmap.png \
-	oddlsp.png \
-	oggstream.html \
-	programming.html \
-	squarepolar.png \
-	stereo.html \
-	stream.png \
-	v-comment.html \
-	vorbis-clip.txt \
-	vorbis-errors.txt \
-	vorbis-fidelity.html \
-	vorbis.html \
-	vorbisword2.png \
-	wait.png \
-	white-ogg.png \
-	white-xifish.png
-
-
-### FIXME: bits needed by the spec which lives in xml
-SPEC_PNG = \
-	components.png \
-	floor1-1.png \
-	floor1-2.png \
-	floor1-3.png \
-	floor1-4.png \
-	hufftree.png \
-	hufftree-under.png \
-	residue-pack.png \
-	residue2.png \
-	white-xifish.png \
-	window1.png \
-	window2.png
-
-SPEC_PDF = xifish.pdf
-
-# FIXME: also needed here
-#	white-xifish.png 
-built_docs = Vorbis_I_spec.html Vorbis_I_spec.pdf
-doc_DATA = $(static_docs) $(SPEC_PNG)
-
-# conditionally make the generated documentation
-#doc_DATA = $(static_docs) $(SPEC_PNG) $(built_docs)
-EXTRA_DIST = $(static_docs) $(doc_sources) \
-	$(SPEC_PNG) $(SPEC_PDF) $(built_docs)
-
-doc_sources = xml/Vorbis_I_spec.xml \
-	xml/01-introduction.xml \
-	xml/02-bitpacking.xml \
-	xml/03-codebook.xml \
-	xml/04-codec.xml \
-	xml/05-comment.xml \
-	xml/06-floor0.xml \
-	xml/07-floor1.xml \
-	xml/08-residue.xml \
-	xml/09-helper.xml \
-	xml/10-tables.xml \
-	xml/a1-encapsulation_ogg.xml \
-	xml/a2-encapsulation_rtp.xml \
-	xml/footer.xml \
-	xml/spec-common.xsl \
-	xml/spec-fo.xsl \
-	xml/spec-html.xsl
-
-
-# these are expensive; only remove if we have to
-DISTCLEANFILES = $(built_docs)
-CLEANFILES = Vorbis_I_spec.fo spec.aux spec.log spec.out
-
-# rules for temporary build dir for spec
-BUILDDIR = build
-# how to copy images to build dir
-SPEC_PNG_BUILD = $(foreach file, $(SPEC_PNG), $(BUILDDIR)/$(file))
-SPEC_PDF_BUILD = $(foreach file, $(SPEC_PDF), $(BUILDDIR)/$(file))
-all: all-recursive
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  doc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-docDATA: $(doc_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
-	@list='$(doc_DATA)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
-	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
-	done
-
-uninstall-docDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(doc_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
-	done
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run `make' without going through this Makefile.
-# To change the values of `make' variables: instead of editing Makefiles,
-# (1) if the variable is set in `config.status', edit `config.status'
-#     (which will cause the Makefiles to be regenerated when you run `make');
-# (2) otherwise, pass the desired values on the `make' command line.
-$(RECURSIVE_TARGETS):
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-
-$(RECURSIVE_CLEAN_TARGETS):
-	@failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	rev=''; for subdir in $$list; do \
-	  if test "$$subdir" = "."; then :; else \
-	    rev="$$subdir $$rev"; \
-	  fi; \
-	done; \
-	rev="$$rev ."; \
-	target=`echo $@ | sed s/-recursive//`; \
-	for subdir in $$rev; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done && test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-	list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test -d "$(distdir)/$$subdir" \
-	    || $(MKDIR_P) "$(distdir)/$$subdir" \
-	    || exit 1; \
-	    distdir=`$(am__cd) $(distdir) && pwd`; \
-	    top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
-	    (cd $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$top_distdir" \
-	        distdir="$$distdir/$$subdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-recursive
-all-am: Makefile $(DATA)
-installdirs: installdirs-recursive
-installdirs-am:
-	for dir in "$(DESTDIR)$(docdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-recursive
-
-clean-am: clean-generic clean-libtool clean-local mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-info: info-recursive
-
-info-am:
-
-install-data-am: install-docDATA
-
-install-dvi: install-dvi-recursive
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-info: install-info-recursive
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-ps: install-ps-recursive
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am: uninstall-docDATA
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
-	install-strip
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am check check-am clean clean-generic clean-libtool \
-	clean-local ctags ctags-recursive distclean distclean-generic \
-	distclean-libtool distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-data \
-	install-data-am install-docDATA install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs installdirs-am \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags tags-recursive uninstall uninstall-am uninstall-docDATA
-
-$(BUILDDIR)/%: $(srcdir)/%
-	@echo "Copying $< to $@"
-	@mkdir -p $(BUILDDIR)
-	@cp $< $@
-
-# how to copy the xml to build dir; cheat by only targeting the main one
-$(BUILDDIR)/Vorbis_I_spec.xml: $(doc_sources)
-	@mkdir -p $(BUILDDIR)
-	@for file in $(doc_sources); do cp $(srcdir)/$$file $(BUILDDIR); done
-# translate the draft rtp.txt to .xml in the BUILDDIR
-$(BUILDDIR)/draft-rtp.xml: draft-ietf-avt-rtp-vorbis-05.txt
-	cat $< | sed 's/
-//g' > $@
-# cat $< | sed 's/
-//g' | sed 's/</\&lt;/g' | sed 's/>/\&gt;/g' > $@
-
-# explicit rules for generating docs
-#Vorbis_I_spec.html: $(SPEC_PNG_BUILD) $(BUILDDIR)/Vorbis_I_spec.xml
-#	cd build; xsltproc --xinclude --output Vorbis_I_spec.html spec-html.xsl Vorbis_I_spec.xml && mv $@ ..
-
-#Vorbis_I_spec.fo: $(BUILDDIR)/Vorbis_I_spec.xml
-#	cd build; xsltproc --xinclude --output $@ spec-fo.xsl Vorbis_I_spec.xml && mv $@ ..
-
-# we add the two newlines to pdfxmltex because this entire XML
-# toolchain is built from wishful thinking and bonghits and the
-# default supplied passivetex config files are buggy.
-#Vorbis_I_spec.pdf: Vorbis_I_spec.fo $(SPEC_PNG_BUILD) $(SPEC_PDF_BUILD)
-#	cp $< build/spec.fo # work around a passivetex bug
-#	-cd build; echo -e -n "\n\n" | pdfxmltex spec.fo
-#	-cd build; echo -e -n "\n\n" | pdfxmltex spec.fo
-#	rm build/spec.fo
-#	mv build/spec.pdf $@
-Vorbis_I_spec.html: NO_DOCS_ERROR
-Vorbis_I_spec.pdf: NO_DOCS_ERROR
-NO_DOCS_ERROR:
-	@echo
-	@echo "*** Documentation has not been built! ***"
-	@echo "Try re-running after passing --enable-docs to configure."
-	@echo
-
-# clean up build dir
-clean-local:
-	-$(RM) -r $(BUILDDIR)
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Index: bvorbis-1.2.0/doc/vorbisenc/Makefile
===================================================================
--- /libvorbis-1.2.0/doc/vorbisenc/Makefile	(revision 17)
+++ 	(revision )
@@ -1,382 +1,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# doc/vorbisenc/Makefile.  Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-
-pkgdatadir = $(datadir)/libvorbis
-pkglibdir = $(libdir)/libvorbis
-pkgincludedir = $(includedir)/libvorbis
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = x86_64-unknown-linux-gnu
-host_triplet = x86_64-unknown-linux-gnu
-target_triplet = x86_64-unknown-linux-gnu
-subdir = doc/vorbisenc
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(docdir)"
-docDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(doc_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run aclocal-1.10
-ALLOCA = 
-AMTAR = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run automake-1.10
-AWK = mawk
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -O20 -ffast-math -D_REENTRANT -fsigned-char  -DUSE_MEMORY_H
-CPP = gcc -E
-CPPFLAGS = 
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEBUG = -g -Wall -W -D_REENTRANT -D__NO_MATH_INLINES -fsigned-char
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO = echo
-ECHO_C = 
-ECHO_N = -n
-ECHO_T = 
-EGREP = /bin/grep -E
-EXEEXT = 
-F77 = 
-FFLAGS = 
-GREP = /bin/grep
-HAVE_PKG_CONFIG = yes
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
-LDFLAGS = 
-LIBOBJS = 
-LIBS = 
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBOBJS = 
-MAINT = 
-MAKEINFO = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run makeinfo
-MKDIR_P = /bin/mkdir -p
-OBJEXT = o
-OGG_CFLAGS =  
-OGG_LIBS = -logg  
-PACKAGE = libvorbis
-PACKAGE_BUGREPORT = 
-PACKAGE_NAME = 
-PACKAGE_STRING = 
-PACKAGE_TARNAME = 
-PACKAGE_VERSION = 
-PATH_SEPARATOR = :
-PDFXMLTEX = 
-PKG_CONFIG = /usr/bin/pkg-config
-PROFILE = -pg -g -O20 -ffast-math -D_REENTRANT -fsigned-char
-RANLIB = ranlib
-SET_MAKE = 
-SHELL = /bin/bash
-STRIP = strip
-VERSION = 1.2.0
-VE_LIB_AGE = 0
-VE_LIB_CURRENT = 2
-VE_LIB_REVISION = 3
-VF_LIB_AGE = 2
-VF_LIB_CURRENT = 5
-VF_LIB_REVISION = 0
-VORBIS_LIBS = -lm
-V_LIB_AGE = 4
-V_LIB_CURRENT = 4
-V_LIB_REVISION = 0
-XSLTPROC = 
-abs_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0/doc/vorbisenc
-abs_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0/doc/vorbisenc
-abs_top_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0
-abs_top_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 = 
-am__include = include
-am__leading_dot = .
-am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-bindir = ${exec_prefix}/bin
-build = x86_64-unknown-linux-gnu
-build_alias = 
-build_cpu = x86_64
-build_os = linux-gnu
-build_vendor = unknown
-builddir = .
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)/vorbisenc
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = x86_64-unknown-linux-gnu
-host_alias = 
-host_cpu = x86_64
-host_os = linux-gnu
-host_vendor = unknown
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = $(SHELL) /home/giles/projects/ghostscript/libvorbis-1.2.0/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-mandir = ${datarootdir}/man
-mkdir_p = /bin/mkdir -p
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-pthread_lib = -lpthread
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-srcdir = .
-sysconfdir = ${prefix}/etc
-target = x86_64-unknown-linux-gnu
-target_alias = 
-target_cpu = x86_64
-target_os = linux-gnu
-target_vendor = unknown
-top_builddir = ../..
-top_srcdir = ../..
-doc_DATA = index.html overview.html reference.html style.css\
-	 vorbis_encode_ctl.html vorbis_encode_init.html vorbis_info.html\
-	vorbis_encode_init_vbr.html
-
-EXTRA_DIST = $(doc_DATA)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/vorbisenc/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  doc/vorbisenc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-docDATA: $(doc_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
-	@list='$(doc_DATA)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
-	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
-	done
-
-uninstall-docDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(doc_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
-	done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(docdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-docDATA
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-docDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-docDATA install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	uninstall uninstall-am uninstall-docDATA
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Index: bvorbis-1.2.0/doc/vorbisfile/Makefile
===================================================================
--- /libvorbis-1.2.0/doc/vorbisfile/Makefile	(revision 17)
+++ 	(revision )
@@ -1,396 +1,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# doc/vorbisfile/Makefile.  Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-
-pkgdatadir = $(datadir)/libvorbis
-pkglibdir = $(libdir)/libvorbis
-pkgincludedir = $(includedir)/libvorbis
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = x86_64-unknown-linux-gnu
-host_triplet = x86_64-unknown-linux-gnu
-target_triplet = x86_64-unknown-linux-gnu
-subdir = doc/vorbisfile
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-SOURCES =
-DIST_SOURCES =
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
-am__installdirs = "$(DESTDIR)$(docdir)"
-docDATA_INSTALL = $(INSTALL_DATA)
-DATA = $(doc_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run aclocal-1.10
-ALLOCA = 
-AMTAR = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run automake-1.10
-AWK = mawk
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -O20 -ffast-math -D_REENTRANT -fsigned-char  -DUSE_MEMORY_H
-CPP = gcc -E
-CPPFLAGS = 
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEBUG = -g -Wall -W -D_REENTRANT -D__NO_MATH_INLINES -fsigned-char
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO = echo
-ECHO_C = 
-ECHO_N = -n
-ECHO_T = 
-EGREP = /bin/grep -E
-EXEEXT = 
-F77 = 
-FFLAGS = 
-GREP = /bin/grep
-HAVE_PKG_CONFIG = yes
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
-LDFLAGS = 
-LIBOBJS = 
-LIBS = 
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBOBJS = 
-MAINT = 
-MAKEINFO = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run makeinfo
-MKDIR_P = /bin/mkdir -p
-OBJEXT = o
-OGG_CFLAGS =  
-OGG_LIBS = -logg  
-PACKAGE = libvorbis
-PACKAGE_BUGREPORT = 
-PACKAGE_NAME = 
-PACKAGE_STRING = 
-PACKAGE_TARNAME = 
-PACKAGE_VERSION = 
-PATH_SEPARATOR = :
-PDFXMLTEX = 
-PKG_CONFIG = /usr/bin/pkg-config
-PROFILE = -pg -g -O20 -ffast-math -D_REENTRANT -fsigned-char
-RANLIB = ranlib
-SET_MAKE = 
-SHELL = /bin/bash
-STRIP = strip
-VERSION = 1.2.0
-VE_LIB_AGE = 0
-VE_LIB_CURRENT = 2
-VE_LIB_REVISION = 3
-VF_LIB_AGE = 2
-VF_LIB_CURRENT = 5
-VF_LIB_REVISION = 0
-VORBIS_LIBS = -lm
-V_LIB_AGE = 4
-V_LIB_CURRENT = 4
-V_LIB_REVISION = 0
-XSLTPROC = 
-abs_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0/doc/vorbisfile
-abs_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0/doc/vorbisfile
-abs_top_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0
-abs_top_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 = 
-am__include = include
-am__leading_dot = .
-am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-bindir = ${exec_prefix}/bin
-build = x86_64-unknown-linux-gnu
-build_alias = 
-build_cpu = x86_64
-build_os = linux-gnu
-build_vendor = unknown
-builddir = .
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION)/vorbisfile
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = x86_64-unknown-linux-gnu
-host_alias = 
-host_cpu = x86_64
-host_os = linux-gnu
-host_vendor = unknown
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = $(SHELL) /home/giles/projects/ghostscript/libvorbis-1.2.0/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-mandir = ${datarootdir}/man
-mkdir_p = /bin/mkdir -p
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-pthread_lib = -lpthread
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-srcdir = .
-sysconfdir = ${prefix}/etc
-target = x86_64-unknown-linux-gnu
-target_alias = 
-target_cpu = x86_64
-target_os = linux-gnu
-target_vendor = unknown
-top_builddir = ../..
-top_srcdir = ../..
-doc_DATA = OggVorbis_File.html callbacks.html chaining_example_c.html\
-	chainingexample.html crosslap.html datastructures.html decoding.html\
-	example.html exampleindex.html fileinfo.html index.html\
-	initialization.html ov_bitrate.html ov_bitrate_instant.html\
-	ov_callbacks.html ov_clear.html ov_comment.html ov_crosslap.html\
-	ov_info.html ov_open.html ov_open_callbacks.html ov_pcm_seek.html\
-	ov_pcm_seek_lap.html ov_pcm_seek_page.html ov_pcm_seek_page_lap.html\
-	ov_pcm_tell.html ov_pcm_total.html ov_raw_seek.html\
-	ov_raw_seek_lap.html ov_raw_tell.html ov_raw_total.html ov_read.html\
-	ov_read_float.html ov_seekable.html ov_serialnumber.html\
-	ov_streams.html ov_test.html ov_test_callbacks.html ov_test_open.html\
-	ov_time_seek.html ov_time_seek_lap.html ov_time_seek_page.html\
-	ov_time_seek_page_lap.html ov_time_tell.html ov_time_total.html\
-	overview.html reference.html return.html seekexample.html seeking.html\
-	seeking_example_c.html seeking_test_c.html seekingexample.html\
-	style.css threads.html vorbis_comment.html vorbis_info.html\
-	vorbisfile_example_c.html
-
-EXTRA_DIST = $(doc_DATA)
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  doc/vorbisfile/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  doc/vorbisfile/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-install-docDATA: $(doc_DATA)
-	@$(NORMAL_INSTALL)
-	test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)"
-	@list='$(doc_DATA)'; for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  f=$(am__strip_dir) \
-	  echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \
-	  $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \
-	done
-
-uninstall-docDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(doc_DATA)'; for p in $$list; do \
-	  f=$(am__strip_dir) \
-	  echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \
-	  rm -f "$(DESTDIR)$(docdir)/$$f"; \
-	done
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(docdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am: install-docDATA
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-docDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-libtool \
-	distclean distclean-generic distclean-libtool distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-docDATA install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	uninstall uninstall-am uninstall-docDATA
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Index: bvorbis-1.2.0/examples/Makefile
===================================================================
--- /libvorbis-1.2.0/examples/Makefile	(revision 17)
+++ 	(revision )
@@ -1,515 +1,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# examples/Makefile.  Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-
-pkgdatadir = $(datadir)/libvorbis
-pkglibdir = $(libdir)/libvorbis
-pkgincludedir = $(includedir)/libvorbis
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = x86_64-unknown-linux-gnu
-host_triplet = x86_64-unknown-linux-gnu
-target_triplet = x86_64-unknown-linux-gnu
-noinst_PROGRAMS = decoder_example$(EXEEXT) encoder_example$(EXEEXT) \
-	chaining_example$(EXEEXT) vorbisfile_example$(EXEEXT) \
-	seeking_example$(EXEEXT)
-subdir = examples
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-PROGRAMS = $(noinst_PROGRAMS)
-am_chaining_example_OBJECTS = chaining_example.$(OBJEXT)
-chaining_example_OBJECTS = $(am_chaining_example_OBJECTS)
-chaining_example_DEPENDENCIES = ../lib/libvorbisfile.la \
-	../lib/libvorbis.la
-am_decoder_example_OBJECTS = decoder_example.$(OBJEXT)
-decoder_example_OBJECTS = $(am_decoder_example_OBJECTS)
-decoder_example_LDADD = $(LDADD)
-decoder_example_DEPENDENCIES = ../lib/libvorbis.la
-am_encoder_example_OBJECTS = encoder_example.$(OBJEXT)
-encoder_example_OBJECTS = $(am_encoder_example_OBJECTS)
-encoder_example_DEPENDENCIES = ../lib/libvorbisenc.la \
-	../lib/libvorbis.la
-am_seeking_example_OBJECTS = seeking_example.$(OBJEXT)
-seeking_example_OBJECTS = $(am_seeking_example_OBJECTS)
-seeking_example_DEPENDENCIES = ../lib/libvorbisfile.la \
-	../lib/libvorbis.la
-am_vorbisfile_example_OBJECTS = vorbisfile_example.$(OBJEXT)
-vorbisfile_example_OBJECTS = $(am_vorbisfile_example_OBJECTS)
-vorbisfile_example_DEPENDENCIES = ../lib/libvorbisfile.la \
-	../lib/libvorbis.la
-DEFAULT_INCLUDES = -I. -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
-	$(LDFLAGS) -o $@
-SOURCES = $(chaining_example_SOURCES) $(decoder_example_SOURCES) \
-	$(encoder_example_SOURCES) $(seeking_example_SOURCES) \
-	$(vorbisfile_example_SOURCES)
-DIST_SOURCES = $(chaining_example_SOURCES) $(decoder_example_SOURCES) \
-	$(encoder_example_SOURCES) $(seeking_example_SOURCES) \
-	$(vorbisfile_example_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run aclocal-1.10
-ALLOCA = 
-AMTAR = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run automake-1.10
-AWK = mawk
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -O20 -ffast-math -D_REENTRANT -fsigned-char  -DUSE_MEMORY_H
-CPP = gcc -E
-CPPFLAGS = 
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEBUG = -g -Wall -W -D_REENTRANT -D__NO_MATH_INLINES -fsigned-char
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO = echo
-ECHO_C = 
-ECHO_N = -n
-ECHO_T = 
-EGREP = /bin/grep -E
-EXEEXT = 
-F77 = 
-FFLAGS = 
-GREP = /bin/grep
-HAVE_PKG_CONFIG = yes
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
-LDFLAGS = 
-LIBOBJS = 
-LIBS = 
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBOBJS = 
-MAINT = 
-MAKEINFO = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run makeinfo
-MKDIR_P = /bin/mkdir -p
-OBJEXT = o
-OGG_CFLAGS =  
-OGG_LIBS = -logg  
-PACKAGE = libvorbis
-PACKAGE_BUGREPORT = 
-PACKAGE_NAME = 
-PACKAGE_STRING = 
-PACKAGE_TARNAME = 
-PACKAGE_VERSION = 
-PATH_SEPARATOR = :
-PDFXMLTEX = 
-PKG_CONFIG = /usr/bin/pkg-config
-PROFILE = -pg -g -O20 -ffast-math -D_REENTRANT -fsigned-char
-RANLIB = ranlib
-SET_MAKE = 
-SHELL = /bin/bash
-STRIP = strip
-VERSION = 1.2.0
-VE_LIB_AGE = 0
-VE_LIB_CURRENT = 2
-VE_LIB_REVISION = 3
-VF_LIB_AGE = 2
-VF_LIB_CURRENT = 5
-VF_LIB_REVISION = 0
-VORBIS_LIBS = -lm
-V_LIB_AGE = 4
-V_LIB_CURRENT = 4
-V_LIB_REVISION = 0
-XSLTPROC = 
-abs_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0/examples
-abs_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0/examples
-abs_top_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0
-abs_top_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 = 
-am__include = include
-am__leading_dot = .
-am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-bindir = ${exec_prefix}/bin
-build = x86_64-unknown-linux-gnu
-build_alias = 
-build_cpu = x86_64
-build_os = linux-gnu
-build_vendor = unknown
-builddir = .
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = x86_64-unknown-linux-gnu
-host_alias = 
-host_cpu = x86_64
-host_os = linux-gnu
-host_vendor = unknown
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = $(SHELL) /home/giles/projects/ghostscript/libvorbis-1.2.0/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-mandir = ${datarootdir}/man
-mkdir_p = /bin/mkdir -p
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-pthread_lib = -lpthread
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-srcdir = .
-sysconfdir = ${prefix}/etc
-target = x86_64-unknown-linux-gnu
-target_alias = 
-target_cpu = x86_64
-target_os = linux-gnu
-target_vendor = unknown
-top_builddir = ..
-top_srcdir = ..
-AUTOMAKE_OPTIONS = foreign
-INCLUDES = -I$(top_srcdir)/include  
-
-# uncomment to build static executables from the example code
-#LDFLAGS = -all-static 
-LDADD = ../lib/libvorbis.la 
-decoder_example_SOURCES = decoder_example.c
-encoder_example_SOURCES = encoder_example.c
-encoder_example_LDADD = ../lib/libvorbisenc.la ../lib/libvorbis.la 
-chaining_example_SOURCES = chaining_example.c
-chaining_example_LDADD = ../lib/libvorbisfile.la ../lib/libvorbis.la 
-vorbisfile_example_SOURCES = vorbisfile_example.c
-vorbisfile_example_LDADD = ../lib/libvorbisfile.la ../lib/libvorbis.la 
-seeking_example_SOURCES = seeking_example.c
-seeking_example_LDADD = ../lib/libvorbisfile.la ../lib/libvorbis.la 
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  examples/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign  examples/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-clean-noinstPROGRAMS:
-	@list='$(noinst_PROGRAMS)'; for p in $$list; do \
-	  f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \
-	  echo " rm -f $$p $$f"; \
-	  rm -f $$p $$f ; \
-	done
-chaining_example$(EXEEXT): $(chaining_example_OBJECTS) $(chaining_example_DEPENDENCIES) 
-	@rm -f chaining_example$(EXEEXT)
-	$(LINK) $(chaining_example_OBJECTS) $(chaining_example_LDADD) $(LIBS)
-decoder_example$(EXEEXT): $(decoder_example_OBJECTS) $(decoder_example_DEPENDENCIES) 
-	@rm -f decoder_example$(EXEEXT)
-	$(LINK) $(decoder_example_OBJECTS) $(decoder_example_LDADD) $(LIBS)
-encoder_example$(EXEEXT): $(encoder_example_OBJECTS) $(encoder_example_DEPENDENCIES) 
-	@rm -f encoder_example$(EXEEXT)
-	$(LINK) $(encoder_example_OBJECTS) $(encoder_example_LDADD) $(LIBS)
-seeking_example$(EXEEXT): $(seeking_example_OBJECTS) $(seeking_example_DEPENDENCIES) 
-	@rm -f seeking_example$(EXEEXT)
-	$(LINK) $(seeking_example_OBJECTS) $(seeking_example_LDADD) $(LIBS)
-vorbisfile_example$(EXEEXT): $(vorbisfile_example_OBJECTS) $(vorbisfile_example_DEPENDENCIES) 
-	@rm -f vorbisfile_example$(EXEEXT)
-	$(LINK) $(vorbisfile_example_OBJECTS) $(vorbisfile_example_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-include ./$(DEPDIR)/chaining_example.Po
-include ./$(DEPDIR)/decoder_example.Po
-include ./$(DEPDIR)/encoder_example.Po
-include ./$(DEPDIR)/seeking_example.Po
-include ./$(DEPDIR)/vorbisfile_example.Po
-
-.c.o:
-	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-#	source='$<' object='$@' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(COMPILE) -c $<
-
-.c.obj:
-	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-#	source='$<' object='$@' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-#	source='$<' object='$@' libtool=yes \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool clean-noinstPROGRAMS \
-	mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
-	clean-libtool clean-noinstPROGRAMS ctags distclean \
-	distclean-compile distclean-generic distclean-libtool \
-	distclean-tags distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic mostlyclean-libtool \
-	pdf pdf-am ps ps-am tags uninstall uninstall-am
-
-
-debug:
-	$(MAKE) all CFLAGS="-g -Wall -W -D_REENTRANT -D__NO_MATH_INLINES -fsigned-char"
-
-profile:
-	$(MAKE) all CFLAGS="-pg -g -O20 -ffast-math -D_REENTRANT -fsigned-char"
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
Index: bvorbis-1.2.0/vq/Makefile
===================================================================
--- /libvorbis-1.2.0/vq/Makefile	(revision 17)
+++ 	(revision )
@@ -1,532 +1,0 @@
-# Makefile.in generated by automake 1.10 from Makefile.am.
-# vq/Makefile.  Generated from Makefile.in by configure.
-
-# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
-# 2003, 2004, 2005, 2006  Free Software Foundation, Inc.
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-
-
-pkgdatadir = $(datadir)/libvorbis
-pkglibdir = $(libdir)/libvorbis
-pkgincludedir = $(includedir)/libvorbis
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-build_triplet = x86_64-unknown-linux-gnu
-host_triplet = x86_64-unknown-linux-gnu
-target_triplet = x86_64-unknown-linux-gnu
-EXTRA_PROGRAMS = latticebuild$(EXEEXT) latticepare$(EXEEXT) \
-	latticehint$(EXEEXT) latticetune$(EXEEXT) huffbuild$(EXEEXT) \
-	distribution$(EXEEXT)
-subdir = vq
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
-	$(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(install_sh) -d
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-am_distribution_OBJECTS = distribution.$(OBJEXT) bookutil.$(OBJEXT)
-distribution_OBJECTS = $(am_distribution_OBJECTS)
-distribution_LDADD = $(LDADD)
-distribution_DEPENDENCIES = ../lib/libvorbis.la
-am_huffbuild_OBJECTS = huffbuild.$(OBJEXT) vqgen.$(OBJEXT) \
-	bookutil.$(OBJEXT)
-huffbuild_OBJECTS = $(am_huffbuild_OBJECTS)
-huffbuild_LDADD = $(LDADD)
-huffbuild_DEPENDENCIES = ../lib/libvorbis.la
-am_latticebuild_OBJECTS = latticebuild.$(OBJEXT) vqgen.$(OBJEXT) \
-	bookutil.$(OBJEXT)
-latticebuild_OBJECTS = $(am_latticebuild_OBJECTS)
-latticebuild_LDADD = $(LDADD)
-latticebuild_DEPENDENCIES = ../lib/libvorbis.la
-am_latticehint_OBJECTS = latticehint.$(OBJEXT) bookutil.$(OBJEXT)
-latticehint_OBJECTS = $(am_latticehint_OBJECTS)
-latticehint_LDADD = $(LDADD)
-latticehint_DEPENDENCIES = ../lib/libvorbis.la
-am_latticepare_OBJECTS = latticepare.$(OBJEXT) vqgen.$(OBJEXT) \
-	bookutil.$(OBJEXT) vqsplit.$(OBJEXT)
-latticepare_OBJECTS = $(am_latticepare_OBJECTS)
-latticepare_LDADD = $(LDADD)
-latticepare_DEPENDENCIES = ../lib/libvorbis.la
-am_latticetune_OBJECTS = latticetune.$(OBJEXT) vqgen.$(OBJEXT) \
-	bookutil.$(OBJEXT)
-latticetune_OBJECTS = $(am_latticetune_OBJECTS)
-latticetune_LDADD = $(LDADD)
-latticetune_DEPENDENCIES = ../lib/libvorbis.la
-DEFAULT_INCLUDES = -I. -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
-	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
-	$(LDFLAGS) -o $@
-SOURCES = $(distribution_SOURCES) $(huffbuild_SOURCES) \
-	$(latticebuild_SOURCES) $(latticehint_SOURCES) \
-	$(latticepare_SOURCES) $(latticetune_SOURCES)
-DIST_SOURCES = $(distribution_SOURCES) $(huffbuild_SOURCES) \
-	$(latticebuild_SOURCES) $(latticehint_SOURCES) \
-	$(latticepare_SOURCES) $(latticetune_SOURCES)
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run aclocal-1.10
-ALLOCA = 
-AMTAR = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run tar
-AR = ar
-AUTOCONF = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoconf
-AUTOHEADER = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoheader
-AUTOMAKE = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run automake-1.10
-AWK = mawk
-CC = gcc
-CCDEPMODE = depmode=gcc3
-CFLAGS = -O20 -ffast-math -D_REENTRANT -fsigned-char  -DUSE_MEMORY_H
-CPP = gcc -E
-CPPFLAGS = 
-CXX = g++
-CXXCPP = g++ -E
-CXXDEPMODE = depmode=gcc3
-CXXFLAGS = -g -O2
-CYGPATH_W = echo
-DEBUG = -g -Wall -W -D_REENTRANT -D__NO_MATH_INLINES -fsigned-char
-DEFS = -DHAVE_CONFIG_H
-DEPDIR = .deps
-ECHO = echo
-ECHO_C = 
-ECHO_N = -n
-ECHO_T = 
-EGREP = /bin/grep -E
-EXEEXT = 
-F77 = 
-FFLAGS = 
-GREP = /bin/grep
-HAVE_PKG_CONFIG = yes
-INSTALL = /usr/bin/install -c
-INSTALL_DATA = ${INSTALL} -m 644
-INSTALL_PROGRAM = ${INSTALL}
-INSTALL_SCRIPT = ${INSTALL}
-INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
-LDFLAGS = 
-LIBOBJS = 
-LIBS = 
-LIBTOOL = $(SHELL) $(top_builddir)/libtool
-LN_S = ln -s
-LTLIBOBJS = 
-MAINT = 
-MAKEINFO = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run makeinfo
-MKDIR_P = /bin/mkdir -p
-OBJEXT = o
-OGG_CFLAGS =  
-OGG_LIBS = -logg  
-PACKAGE = libvorbis
-PACKAGE_BUGREPORT = 
-PACKAGE_NAME = 
-PACKAGE_STRING = 
-PACKAGE_TARNAME = 
-PACKAGE_VERSION = 
-PATH_SEPARATOR = :
-PDFXMLTEX = 
-PKG_CONFIG = /usr/bin/pkg-config
-PROFILE = -pg -g -O20 -ffast-math -D_REENTRANT -fsigned-char
-RANLIB = ranlib
-SET_MAKE = 
-SHELL = /bin/bash
-STRIP = strip
-VERSION = 1.2.0
-VE_LIB_AGE = 0
-VE_LIB_CURRENT = 2
-VE_LIB_REVISION = 3
-VF_LIB_AGE = 2
-VF_LIB_CURRENT = 5
-VF_LIB_REVISION = 0
-VORBIS_LIBS = -lm
-V_LIB_AGE = 4
-V_LIB_CURRENT = 4
-V_LIB_REVISION = 0
-XSLTPROC = 
-abs_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0/vq
-abs_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0/vq
-abs_top_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0
-abs_top_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0
-ac_ct_CC = gcc
-ac_ct_CXX = g++
-ac_ct_F77 = 
-am__include = include
-am__leading_dot = .
-am__quote = 
-am__tar = ${AMTAR} chof - "$$tardir"
-am__untar = ${AMTAR} xf -
-bindir = ${exec_prefix}/bin
-build = x86_64-unknown-linux-gnu
-build_alias = 
-build_cpu = x86_64
-build_os = linux-gnu
-build_vendor = unknown
-builddir = .
-datadir = ${datarootdir}
-datarootdir = ${prefix}/share
-docdir = ${datarootdir}/doc/${PACKAGE}
-dvidir = ${docdir}
-exec_prefix = ${prefix}
-host = x86_64-unknown-linux-gnu
-host_alias = 
-host_cpu = x86_64
-host_os = linux-gnu
-host_vendor = unknown
-htmldir = ${docdir}
-includedir = ${prefix}/include
-infodir = ${datarootdir}/info
-install_sh = $(SHELL) /home/giles/projects/ghostscript/libvorbis-1.2.0/install-sh
-libdir = ${exec_prefix}/lib
-libexecdir = ${exec_prefix}/libexec
-localedir = ${datarootdir}/locale
-localstatedir = ${prefix}/var
-mandir = ${datarootdir}/man
-mkdir_p = /bin/mkdir -p
-oldincludedir = /usr/include
-pdfdir = ${docdir}
-prefix = /usr/local
-program_transform_name = s,x,x,
-psdir = ${docdir}
-pthread_lib = -lpthread
-sbindir = ${exec_prefix}/sbin
-sharedstatedir = ${prefix}/com
-srcdir = .
-sysconfdir = ${prefix}/etc
-target = x86_64-unknown-linux-gnu
-target_alias = 
-target_cpu = x86_64
-target_os = linux-gnu
-target_vendor = unknown
-top_builddir = ..
-top_srcdir = ..
-INCLUDES = -I../lib -I$(top_srcdir)/include  
-CLEANFILES = $(EXTRA_PROGRAMS)
-AM_LDFLAGS = -static
-LDADD = ../lib/libvorbis.la
-latticebuild_SOURCES = latticebuild.c vqgen.c bookutil.c\
-	vqgen.h bookutil.h localcodebook.h
-
-latticepare_SOURCES = latticepare.c vqgen.c bookutil.c vqsplit.c\
-	vqgen.h vqsplit.h bookutil.h localcodebook.h
-
-latticehint_SOURCES = latticehint.c bookutil.c\
-	vqsplit.h bookutil.h localcodebook.h
-
-latticetune_SOURCES = latticetune.c vqgen.c bookutil.c\
-	vqgen.h bookutil.h localcodebook.h
-
-huffbuild_SOURCES = huffbuild.c vqgen.c bookutil.c\
-	vqgen.h bookutil.h localcodebook.h
-
-distribution_SOURCES = distribution.c bookutil.c\
-	bookutil.h localcodebook.h
-
-EXTRA_DIST = residue_entropy auxpartition.pl
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .c .lo .o .obj
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu  vq/Makefile'; \
-	cd $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu  vq/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-distribution$(EXEEXT): $(distribution_OBJECTS) $(distribution_DEPENDENCIES) 
-	@rm -f distribution$(EXEEXT)
-	$(LINK) $(distribution_OBJECTS) $(distribution_LDADD) $(LIBS)
-huffbuild$(EXEEXT): $(huffbuild_OBJECTS) $(huffbuild_DEPENDENCIES) 
-	@rm -f huffbuild$(EXEEXT)
-	$(LINK) $(huffbuild_OBJECTS) $(huffbuild_LDADD) $(LIBS)
-latticebuild$(EXEEXT): $(latticebuild_OBJECTS) $(latticebuild_DEPENDENCIES) 
-	@rm -f latticebuild$(EXEEXT)
-	$(LINK) $(latticebuild_OBJECTS) $(latticebuild_LDADD) $(LIBS)
-latticehint$(EXEEXT): $(latticehint_OBJECTS) $(latticehint_DEPENDENCIES) 
-	@rm -f latticehint$(EXEEXT)
-	$(LINK) $(latticehint_OBJECTS) $(latticehint_LDADD) $(LIBS)
-latticepare$(EXEEXT): $(latticepare_OBJECTS) $(latticepare_DEPENDENCIES) 
-	@rm -f latticepare$(EXEEXT)
-	$(LINK) $(latticepare_OBJECTS) $(latticepare_LDADD) $(LIBS)
-latticetune$(EXEEXT): $(latticetune_OBJECTS) $(latticetune_DEPENDENCIES) 
-	@rm -f latticetune$(EXEEXT)
-	$(LINK) $(latticetune_OBJECTS) $(latticetune_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-include ./$(DEPDIR)/bookutil.Po
-include ./$(DEPDIR)/distribution.Po
-include ./$(DEPDIR)/huffbuild.Po
-include ./$(DEPDIR)/latticebuild.Po
-include ./$(DEPDIR)/latticehint.Po
-include ./$(DEPDIR)/latticepare.Po
-include ./$(DEPDIR)/latticetune.Po
-include ./$(DEPDIR)/vqgen.Po
-include ./$(DEPDIR)/vqsplit.Po
-
-.c.o:
-	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-#	source='$<' object='$@' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(COMPILE) -c $<
-
-.c.obj:
-	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-#	source='$<' object='$@' libtool=no \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(COMPILE) -c `$(CYGPATH_W) '$<'`
-
-.c.lo:
-	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-	mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
-#	source='$<' object='$@' libtool=yes \
-#	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
-#	$(LTCOMPILE) -c -o $@ $<
-
-mostlyclean-libtool:
-	-rm -f *.lo
-
-clean-libtool:
-	-rm -rf .libs _libs
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	    $$tags $$unique; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	tags=; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '    { files[$$0] = 1; } \
-	       END { for (i in files) print i; }'`; \
-	test -z "$(CTAGS_ARGS)$$tags$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$tags $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && cd $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) $$here
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
-	    fi; \
-	    cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
-	  else \
-	    test -f $(distdir)/$$file \
-	    || cp -p $$d/$$file $(distdir)/$$file \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile
-installdirs:
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	  `test -z '$(STRIP)' || \
-	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
-mostlyclean-generic:
-
-clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-libtool mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-info: install-info-am
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-ps: install-ps-am
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic \
-	mostlyclean-libtool
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \
-	clean-libtool ctags distclean distclean-compile \
-	distclean-generic distclean-libtool distclean-tags distdir dvi \
-	dvi-am html html-am info info-am install install-am \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-html install-html-am \
-	install-info install-info-am install-man install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-compile \
-	mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am
-
-
-debugvq:
-	$(MAKE) vq CFLAGS="-g -Wall -W -D_REENTRANT -D__NO_MATH_INLINES -fsigned-char"
-
-profilevq:
-	$(MAKE) vq CFLAGS="-pg -g -O20 -ffast-math -D_REENTRANT -fsigned-char"
-
-vq: 
-	$(MAKE) $(EXTRA_PROGRAMS) 
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:
