/* ----------------------------------------------------------------------------- This source file is part of OGRE (Object-oriented Graphics Rendering Engine) For the latest info, see http://www.ogre3d.org/ Copyright (c) 2000-2013 Torus Knot Software Ltd Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. ----------------------------------------------------------------------------- */ #ifndef __Overlay_H__ #define __Overlay_H__ #include "OgreOverlayPrerequisites.h" #include "OgreSceneNode.h" #include "OgreIteratorWrappers.h" #include "OgreMatrix4.h" namespace Ogre { /** \addtogroup Core * @{ */ /** \addtogroup Overlays * @{ */ /** Represents a layer which is rendered on top of the 'normal' scene contents. @remarks An overlay is a container for visual components (2D and 3D) which will be rendered after the main scene in order to composite heads-up-displays, menus or other layers on top of the contents of the scene. @par An overlay always takes up the entire size of the viewport, although the components attached to it do not have to. An overlay has no visual element in itself, it it merely a container for visual elements. @par Overlays are created by calling OverlayManager::create, or by defining them in special text scripts (.overlay files). As many overlays as you like can be defined; after creation an overlay is hidden i.e. not visible until you specifically enable it by calling 'show'. This allows you to have multiple overlays predefined (menus etc) which you make visible only when you want. It is possible to have multiple overlays enabled at once; in this case the relative 'zorder' parameter of the overlays determine which one is displayed on top. @par By default overlays are rendered into all viewports. This is fine when you only have fullscreen viewports, but if you have picture-in-picture views, you probably don't want the overlay displayed in the smaller viewports. You turn this off for a specific viewport by calling the Viewport::setDisplayOverlays method. */ class _OgreOverlayExport Overlay : public OverlayAlloc { public: typedef list::type OverlayContainerList; protected: String mName; /// Internal root node, used as parent for 3D objects SceneNode* mRootNode; /** 2D elements OverlayContainers, linked list for easy sorting by zorder later Not a map because sort can be saved since changes infrequent (unlike render queue) */ OverlayContainerList m2DElements; /// Degrees of rotation around center Radian mRotate; /// Scroll values, offsets Real mScrollX, mScrollY; /// Scale values Real mScaleX, mScaleY; mutable Matrix4 mTransform; mutable bool mTransformOutOfDate; bool mTransformUpdated; ulong mZOrder; bool mVisible; bool mInitialised; String mOrigin; /** Internal lazy update method. */ void updateTransform(void) const; /** Internal method for initialising an overlay */ void initialise(void); /** Internal method for updating container elements' Z-ordering */ void assignZOrders(void); public: /// Constructor: do not call direct, use OverlayManager::create Overlay(const String& name); virtual ~Overlay(); OverlayContainer* getChild(const String& name); /** Gets the name of this overlay. */ const String& getName(void) const; /** Alters the Z-order of this overlay. @remarks Values between 0 and 650 are valid here. */ void setZOrder(ushort zorder); /** Gets the Z-order of this overlay. */ ushort getZOrder(void) const; /** Gets whether the overlay is displayed or not. */ bool isVisible(void) const; /** Gets whether the overlay is initialised or not. */ bool isInitialised(void) const { return mInitialised; } /** Shows the overlay if it was hidden. */ void show(void); /** Hides the overlay if it was visible. */ void hide(void); /** Adds a 2D 'container' to the overlay. @remarks Containers are created and managed using the OverlayManager. A container could be as simple as a square panel, or something more complex like a grid or tree view. Containers group collections of other elements, giving them a relative coordinate space and a common z-order. If you want to attach a GUI widget to an overlay, you have to do it via a container. @param cont Pointer to a container to add, created using OverlayManager. */ void add2D(OverlayContainer* cont); /** Removes a 2D container from the overlay. @remarks NOT FAST. Consider OverlayElement::hide. */ void remove2D(OverlayContainer* cont); /** Adds a node capable of holding 3D objects to the overlay. @remarks Although overlays are traditionally associated with 2D elements, there are reasons why you might want to attach 3D elements to the overlay too. For example, if you wanted to have a 3D cockpit, which was overlaid with a HUD, then you would create 2 overlays, one with a 3D object attached for the cockpit, and one with the HUD elements attached (the zorder of the HUD overlay would be higher than the cockpit to ensure it was always on top). @par A SceneNode can have any number of 3D objects attached to it. SceneNodes are usually created using SceneManager::createSceneNode, but in this case you should create a standard SceneNode instance manually; this is because these scene nodes are not managed by the SceneManager and some custom SceneManager plugins will rely on specialist behaviour the overlay does not support. By attaching a SceneNode to an overlay, you indicate that:
  1. You want the contents of this node to only appear when the overlay is active
  2. You want the node to inherit a coordinate space relative to the camera, rather than relative to the root scene node
  3. You want these objects to be rendered after the contents of the main scene to ensure they are rendered on top
One major consideration when using 3D objects in overlays is the behaviour of the depth buffer. Overlays should use materials with depth checking off, to ensure that their contents are always displayed on top of the main scene (to do otherwise would result in objects 'poking through' the overlay). The problem with using 3D objects is that if they are concave, or self-overlap, then you can get artefacts because of the lack of depth buffer checking. So you should ensure that any 3D objects you us in the overlay are convex, and don't overlap each other. If they must overlap, split them up and put them in 2 overlays. Alternatively, use a 2D element underneath them which will clear the depth buffer values underneath ready for the 3D element to be rendered correctly. */ void add3D(SceneNode* node); /** Removes a 3D element from the overlay. */ void remove3D(SceneNode* node); /** Clears the overlay of all attached items. */ void clear(); /** Sets the scrolling factor of this overlay. @remarks You can use this to set an offset to be used to scroll an overlay around the screen. @param x Horizontal scroll value, where 0 = normal, -0.5 = scroll so that only the right half the screen is visible etc @param y Vertical scroll value, where 0 = normal, 0.5 = scroll down by half a screen etc. */ void setScroll(Real x, Real y); /** Gets the current X scroll value */ Real getScrollX(void) const; /** Gets the current Y scroll value */ Real getScrollY(void) const; /** Scrolls the overlay by the offsets provided. @remarks This method moves the overlay by the amounts provided. As with other methods on this object, a full screen width / height is represented by the value 1.0. */ void scroll(Real xoff, Real yoff); /** Sets the rotation applied to this overlay.*/ void setRotate(const Radian& angle); /** Gets the rotation applied to this overlay, in degrees.*/ const Radian &getRotate(void) const { return mRotate; } /** Adds the passed in angle to the rotation applied to this overlay. */ void rotate(const Radian& angle); /** Sets the scaling factor of this overlay. @remarks You can use this to set an scale factor to be used to zoom an overlay. @param x Horizontal scale value, where 1.0 = normal, 0.5 = half size etc @param y Vertical scale value, where 1.0 = normal, 0.5 = half size etc */ void setScale(Real x, Real y); /** Gets the current X scale value */ Real getScaleX(void) const; /** Gets the current Y scale value */ Real getScaleY(void) const; /** Used to transform the overlay when scrolling, scaling etc. */ void _getWorldTransforms(Matrix4* xform) const; /** Internal method to put the overlay contents onto the render queue. */ void _findVisibleObjects(Camera* cam, RenderQueue* queue); /** This returns a OverlayElement at position x,y. */ virtual OverlayElement* findElementAt(Real x, Real y); /** Returns an iterator over all 2D elements in this manager. @remarks VectorIterator is actually a too generic name, since it also works for lists. */ typedef VectorIterator Overlay2DElementsIterator ; Overlay2DElementsIterator get2DElementsIterator () { return Overlay2DElementsIterator (m2DElements.begin(), m2DElements.end()); } /** Get the origin of this overlay, e.g. a script file name. @remarks This property will only contain something if the creator of this overlay chose to populate it. Script loaders are advised to populate it. */ const String& getOrigin(void) const { return mOrigin; } /// Notify this overlay of it's origin void _notifyOrigin(const String& origin) { mOrigin = origin; } }; /** @} */ /** @} */ } #endif