# generated automatically by aclocal 1.10 -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006 Free Software Foundation, Inc. # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. m4_if(m4_PACKAGE_VERSION, [2.61],, [m4_fatal([this file was generated for autoconf 2.61. You have another version of autoconf. If you want to use that, you should regenerate the build system entirely.], [63])]) # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- # serial 51 AC_PROG_LIBTOOL # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) # ----------------------------------------------------------- # If this macro is not defined by Autoconf, define it here. m4_ifdef([AC_PROVIDE_IFELSE], [], [m4_define([AC_PROVIDE_IFELSE], [m4_ifdef([AC_PROVIDE_$1], [$2], [$3])])]) # AC_PROG_LIBTOOL # --------------- AC_DEFUN([AC_PROG_LIBTOOL], [AC_REQUIRE([_AC_PROG_LIBTOOL])dnl dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. AC_PROVIDE_IFELSE([AC_PROG_CXX], [AC_LIBTOOL_CXX], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX ])]) dnl And a similar setup for Fortran 77 support AC_PROVIDE_IFELSE([AC_PROG_F77], [AC_LIBTOOL_F77], [define([AC_PROG_F77], defn([AC_PROG_F77])[AC_LIBTOOL_F77 ])]) dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. AC_PROVIDE_IFELSE([AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], [AC_LIBTOOL_GCJ], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], [AC_LIBTOOL_GCJ], [ifdef([AC_PROG_GCJ], [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ifdef([A][M_PROG_GCJ], [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) ifdef([LT_AC_PROG_GCJ], [define([LT_AC_PROG_GCJ], defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) ])])# AC_PROG_LIBTOOL # _AC_PROG_LIBTOOL # ---------------- AC_DEFUN([_AC_PROG_LIBTOOL], [AC_REQUIRE([AC_LIBTOOL_SETUP])dnl AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl AC_BEFORE([$0],[AC_LIBTOOL_F77])dnl AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # This can be used to rebuild libtool when needed LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl # Prevent multiple expansion define([AC_PROG_LIBTOOL], []) ])# _AC_PROG_LIBTOOL # AC_LIBTOOL_SETUP # ---------------- AC_DEFUN([AC_LIBTOOL_SETUP], [AC_PREREQ(2.50)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl # Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! AC_REQUIRE([AC_OBJEXT])dnl AC_REQUIRE([AC_EXEEXT])dnl dnl AC_LIBTOOL_SYS_MAX_CMD_LEN AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE AC_LIBTOOL_OBJDIR AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl _LT_AC_PROG_ECHO_BACKSLASH case $host_os in aix3*) # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi ;; esac # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. Xsed='sed -e 1s/^X//' [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] # Same as above, but do not quote variable references. [double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] # Sed substitution to delay expansion of an escaped shell variable in a # double_quote_subst'ed string. delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' # Sed substitution to avoid accidental globbing in evaled expressions no_glob_subst='s/\*/\\\*/g' # Constants: rm="rm -f" # Global variables: default_ofile=libtool can_build_shared=yes # All known linkers require a `.a' archive for static linking (except MSVC, # which needs '.lib'). libext=a ltmain="$ac_aux_dir/ltmain.sh" ofile="$default_ofile" with_gnu_ld="$lt_cv_prog_gnu_ld" AC_CHECK_TOOL(AR, ar, false) AC_CHECK_TOOL(RANLIB, ranlib, :) AC_CHECK_TOOL(STRIP, strip, :) old_CC="$CC" old_CFLAGS="$CFLAGS" # Set sane defaults for various variables test -z "$AR" && AR=ar test -z "$AR_FLAGS" && AR_FLAGS=cru test -z "$AS" && AS=as test -z "$CC" && CC=cc test -z "$LTCC" && LTCC=$CC test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS test -z "$DLLTOOL" && DLLTOOL=dlltool test -z "$LD" && LD=ld test -z "$LN_S" && LN_S="ln -s" test -z "$MAGIC_CMD" && MAGIC_CMD=file test -z "$NM" && NM=nm test -z "$SED" && SED=sed test -z "$OBJDUMP" && OBJDUMP=objdump test -z "$RANLIB" && RANLIB=: test -z "$STRIP" && STRIP=: test -z "$ac_objext" && ac_objext=o # Determine commands to create old-style static archives. old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' old_postinstall_cmds='chmod 644 $oldlib' old_postuninstall_cmds= if test -n "$RANLIB"; then case $host_os in openbsd*) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ;; *) old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ;; esac old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" fi _LT_CC_BASENAME([$compiler]) # Only perform the check for file, if the check method requires it case $deplibs_check_method in file_magic*) if test "$file_magic_cmd" = '$MAGIC_CMD'; then AC_PATH_MAGIC fi ;; esac AC_PROVIDE_IFELSE([AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], enable_win32_dll=yes, enable_win32_dll=no) AC_ARG_ENABLE([libtool-lock], [AC_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes AC_ARG_WITH([pic], [AC_HELP_STRING([--with-pic], [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], [pic_mode="$withval"], [pic_mode=default]) test -z "$pic_mode" && pic_mode=default # Use C for the default configuration in the libtool script tagname= AC_LIBTOOL_LANG_C_CONFIG _LT_AC_TAGCONFIG ])# AC_LIBTOOL_SETUP # _LT_AC_SYS_COMPILER # ------------------- AC_DEFUN([_LT_AC_SYS_COMPILER], [AC_REQUIRE([AC_PROG_CC])dnl # If no C compiler was specified, use CC. LTCC=${LTCC-"$CC"} # If no C compiler flags were specified, use CFLAGS. LTCFLAGS=${LTCFLAGS-"$CFLAGS"} # Allow CC to be a program name with arguments. compiler=$CC ])# _LT_AC_SYS_COMPILER # _LT_CC_BASENAME(CC) # ------------------- # Calculate cc_basename. Skip known compiler wrappers and cross-prefix. AC_DEFUN([_LT_CC_BASENAME], [for cc_temp in $1""; do case $cc_temp in compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; \-*) ;; *) break;; esac done cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ]) # _LT_COMPILER_BOILERPLATE # ------------------------ # Check for compiler boilerplate output or warnings with # the simple compiler test code. AC_DEFUN([_LT_COMPILER_BOILERPLATE], [AC_REQUIRE([LT_AC_PROG_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_compile_test_code" >conftest.$ac_ext eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_compiler_boilerplate=`cat conftest.err` $rm conftest* ])# _LT_COMPILER_BOILERPLATE # _LT_LINKER_BOILERPLATE # ---------------------- # Check for linker boilerplate output or warnings with # the simple link test code. AC_DEFUN([_LT_LINKER_BOILERPLATE], [AC_REQUIRE([LT_AC_PROG_SED])dnl ac_outfile=conftest.$ac_objext echo "$lt_simple_link_test_code" >conftest.$ac_ext eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err _lt_linker_boilerplate=`cat conftest.err` $rm conftest* ])# _LT_LINKER_BOILERPLATE # _LT_AC_SYS_LIBPATH_AIX # ---------------------- # Links a minimal program and checks the executable # for the system default hardcoded library path. In most cases, # this is /usr/lib:/lib, but when the MPI compilers are used # the location of the communication and MPI libs are included too. # If we don't find anything, use the default library path according # to the aix ld manual. AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_LINK_IFELSE(AC_LANG_PROGRAM,[ lt_aix_libpath_sed=' /Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/ p } }' aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` # Check for a 64-bit object if we didn't find anything. if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` fi],[]) if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ])# _LT_AC_SYS_LIBPATH_AIX # _LT_AC_SHELL_INIT(ARG) # ---------------------- AC_DEFUN([_LT_AC_SHELL_INIT], [ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], [AC_DIVERT_PUSH(NOTICE)]) $1 AC_DIVERT_POP ])# _LT_AC_SHELL_INIT # _LT_AC_PROG_ECHO_BACKSLASH # -------------------------- # Add some code to the start of the generated configure script which # will find an echo command which doesn't interpret backslashes. AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], [_LT_AC_SHELL_INIT([ # Check that we are running under the correct shell. SHELL=${CONFIG_SHELL-/bin/sh} case X$ECHO in X*--fallback-echo) # Remove one level of quotation (which was required for Make). ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` ;; esac echo=${ECHO-echo} if test "X[$]1" = X--no-reexec; then # Discard the --no-reexec flag, and continue. shift elif test "X[$]1" = X--fallback-echo; then # Avoid inline document here, it may be left over : elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then # Yippee, $echo works! : else # Restart under the correct shell. exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} fi if test "X[$]1" = X--fallback-echo; then # used as fallback echo shift cat </dev/null 2>&1 && unset CDPATH if test -z "$ECHO"; then if test "X${echo_test_string+set}" != Xset; then # find a string as large as possible, as long as the shell can cope with it for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... if (echo_test_string=`eval $cmd`) 2>/dev/null && echo_test_string=`eval $cmd` && (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null then break fi done fi if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then : else # The Solaris, AIX, and Digital Unix default echo programs unquote # backslashes. This makes it impossible to quote backslashes using # echo "$something" | sed 's/\\/\\\\/g' # # So, first we look for a working echo in the user's PATH. lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for dir in $PATH /usr/ucb; do IFS="$lt_save_ifs" if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$dir/echo" break fi done IFS="$lt_save_ifs" if test "X$echo" = Xecho; then # We didn't find a better echo, so look for alternatives. if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # This shell has a builtin print -r that does the trick. echo='print -r' elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && test "X$CONFIG_SHELL" != X/bin/ksh; then # If we have ksh, try running configure again with it. ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} export ORIGINAL_CONFIG_SHELL CONFIG_SHELL=/bin/ksh export CONFIG_SHELL exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} else # Try using printf. echo='printf %s\n' if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then # Cool, printf works : elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL export CONFIG_SHELL SHELL="$CONFIG_SHELL" export SHELL echo="$CONFIG_SHELL [$]0 --fallback-echo" elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && test "X$echo_testing_string" = 'X\t' && echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && test "X$echo_testing_string" = "X$echo_test_string"; then echo="$CONFIG_SHELL [$]0 --fallback-echo" else # maybe with a smaller string... prev=: for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null then break fi prev="$cmd" done if test "$prev" != 'sed 50q "[$]0"'; then echo_test_string=`eval $prev` export echo_test_string exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} else # Oops. We lost completely, so just stick with echo. echo=echo fi fi fi fi fi fi # Copy echo and quote the copy suitably for passing to libtool from # the Makefile, instead of quoting the original, which is used later. ECHO=$echo if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" fi AC_SUBST(ECHO) ])])# _LT_AC_PROG_ECHO_BACKSLASH # _LT_AC_LOCK # ----------- AC_DEFUN([_LT_AC_LOCK], [AC_ARG_ENABLE([libtool-lock], [AC_HELP_STRING([--disable-libtool-lock], [avoid locking (might break parallel builds)])]) test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. case $host in ia64-*-hpux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.$ac_objext` in *ELF-32*) HPUX_IA64_MODE="32" ;; *ELF-64*) HPUX_IA64_MODE="64" ;; esac fi rm -rf conftest* ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then if test "$lt_cv_prog_gnu_ld" = yes; then case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -melf32bsmip" ;; *N32*) LD="${LD-ld} -melf32bmipn32" ;; *64-bit*) LD="${LD-ld} -melf64bmip" ;; esac else case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; *N32*) LD="${LD-ld} -n32" ;; *64-bit*) LD="${LD-ld} -64" ;; esac fi fi rm -rf conftest* ;; x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ s390*-*linux*|sparc*-*linux*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *32-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_i386_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_i386" ;; ppc64-*linux*|powerpc64-*linux*) LD="${LD-ld} -m elf32ppclinux" ;; s390x-*linux*) LD="${LD-ld} -m elf_s390" ;; sparc64-*linux*) LD="${LD-ld} -m elf32_sparc" ;; esac ;; *64-bit*) case $host in x86_64-*kfreebsd*-gnu) LD="${LD-ld} -m elf_x86_64_fbsd" ;; x86_64-*linux*) LD="${LD-ld} -m elf_x86_64" ;; ppc*-*linux*|powerpc*-*linux*) LD="${LD-ld} -m elf64ppc" ;; s390*-*linux*) LD="${LD-ld} -m elf64_s390" ;; sparc*-*linux*) LD="${LD-ld} -m elf64_sparc" ;; esac ;; esac fi rm -rf conftest* ;; *-*-sco3.2v5*) # On SCO OpenServer 5, we need -belf to get full-featured binaries. SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, [AC_LANG_PUSH(C) AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; sparc*-*solaris*) # Find out which ABI we are using. echo 'int i;' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then case `/usr/bin/file conftest.o` in *64-bit*) case $lt_cv_prog_gnu_ld in yes*) LD="${LD-ld} -m elf64_sparc" ;; *) LD="${LD-ld} -64" ;; esac ;; esac fi rm -rf conftest* ;; AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], [*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) ;; ]) esac need_locks="$enable_libtool_lock" ])# _LT_AC_LOCK # AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) # ---------------------------------------------------------------- # Check whether the given compiler option works AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], [AC_REQUIRE([LT_AC_PROG_SED]) AC_CACHE_CHECK([$1], [$2], [$2=no ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="$3" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. # The option is referenced via a variable to avoid confusing sed. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>conftest.err) ac_status=$? cat conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s "$ac_outfile"; then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings other than the usual output. $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi fi $rm conftest* ]) if test x"[$]$2" = xyes; then ifelse([$5], , :, [$5]) else ifelse([$6], , :, [$6]) fi ])# AC_LIBTOOL_COMPILER_OPTION # AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, # [ACTION-SUCCESS], [ACTION-FAILURE]) # ------------------------------------------------------------ # Check whether the given compiler option works AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_CACHE_CHECK([$1], [$2], [$2=no save_LDFLAGS="$LDFLAGS" LDFLAGS="$LDFLAGS $3" echo "$lt_simple_link_test_code" > conftest.$ac_ext if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then # The linker can only warn and ignore the option if not recognized # So say no if there are warnings if test -s conftest.err; then # Append any errors to the config.log. cat conftest.err 1>&AS_MESSAGE_LOG_FD $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 if diff conftest.exp conftest.er2 >/dev/null; then $2=yes fi else $2=yes fi fi $rm conftest* LDFLAGS="$save_LDFLAGS" ]) if test x"[$]$2" = xyes; then ifelse([$4], , :, [$4]) else ifelse([$5], , :, [$5]) fi ])# AC_LIBTOOL_LINKER_OPTION # AC_LIBTOOL_SYS_MAX_CMD_LEN # -------------------------- AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], [# find the maximum length of command line arguments AC_MSG_CHECKING([the maximum length of command line arguments]) AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl i=0 teststring="ABCD" case $build_os in msdosdjgpp*) # On DJGPP, this test can blow up pretty badly due to problems in libc # (any single argument exceeding 2000 bytes causes a buffer overrun # during glob expansion). Even if it were fixed, the result of this # check would be larger than it should be. lt_cv_sys_max_cmd_len=12288; # 12K is about right ;; gnu*) # Under GNU Hurd, this test is not required because there is # no limit to the length of command line arguments. # Libtool will interpret -1 as no limit whatsoever lt_cv_sys_max_cmd_len=-1; ;; cygwin* | mingw*) # On Win9x/ME, this test blows up -- it succeeds, but takes # about 5 minutes as the teststring grows exponentially. # Worse, since 9x/ME are not pre-emptively multitasking, # you end up with a "frozen" computer, even though with patience # the test eventually succeeds (with a max line length of 256k). # Instead, let's just punt: use the minimum linelength reported by # all of the supported platforms: 8192 (on NT/2K/XP). lt_cv_sys_max_cmd_len=8192; ;; amigaos*) # On AmigaOS with pdksh, this test takes hours, literally. # So we just punt and use a minimum line length of 8192. lt_cv_sys_max_cmd_len=8192; ;; netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) # This has been around since 386BSD, at least. Likely further. if test -x /sbin/sysctl; then lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` elif test -x /usr/sbin/sysctl; then lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` else lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs fi # And add a safety zone lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ;; interix*) # We know the value 262144 and hardcode it with a safety zone (like BSD) lt_cv_sys_max_cmd_len=196608 ;; osf*) # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not # nice to cause kernel panics so lets avoid the loop below. # First set a reasonable default. lt_cv_sys_max_cmd_len=16384 # if test -x /sbin/sysconfig; then case `/sbin/sysconfig -q proc exec_disable_arg_limit` in *1*) lt_cv_sys_max_cmd_len=-1 ;; esac fi ;; sco3.2v5*) lt_cv_sys_max_cmd_len=102400 ;; sysv5* | sco5v6* | sysv4.2uw2*) kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` if test -n "$kargmax"; then lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` else lt_cv_sys_max_cmd_len=32768 fi ;; *) lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` if test -n "$lt_cv_sys_max_cmd_len"; then lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` else SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ = "XX$teststring") >/dev/null 2>&1 && new_result=`expr "X$teststring" : ".*" 2>&1` && lt_cv_sys_max_cmd_len=$new_result && test $i != 17 # 1/2 MB should be enough do i=`expr $i + 1` teststring=$teststring$teststring done teststring= # Add a significant safety factor because C++ compilers can tack on massive # amounts of additional arguments before passing them to the linker. # It appears as though 1/2 is a usable value. lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` fi ;; esac ]) if test -n $lt_cv_sys_max_cmd_len ; then AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else AC_MSG_RESULT(none) fi ])# AC_LIBTOOL_SYS_MAX_CMD_LEN # _LT_AC_CHECK_DLFCN # ------------------ AC_DEFUN([_LT_AC_CHECK_DLFCN], [AC_CHECK_HEADERS(dlfcn.h)dnl ])# _LT_AC_CHECK_DLFCN # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) # --------------------------------------------------------------------- AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "$cross_compiling" = yes; then : [$4] else lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 lt_status=$lt_dlunknown cat > conftest.$ac_ext < #endif #include #ifdef RTLD_GLOBAL # define LT_DLGLOBAL RTLD_GLOBAL #else # ifdef DL_GLOBAL # define LT_DLGLOBAL DL_GLOBAL # else # define LT_DLGLOBAL 0 # endif #endif /* We may have to define LT_DLLAZY_OR_NOW in the command line if we find out it does not work in some platform. */ #ifndef LT_DLLAZY_OR_NOW # ifdef RTLD_LAZY # define LT_DLLAZY_OR_NOW RTLD_LAZY # else # ifdef DL_LAZY # define LT_DLLAZY_OR_NOW DL_LAZY # else # ifdef RTLD_NOW # define LT_DLLAZY_OR_NOW RTLD_NOW # else # ifdef DL_NOW # define LT_DLLAZY_OR_NOW DL_NOW # else # define LT_DLLAZY_OR_NOW 0 # endif # endif # endif # endif #endif #ifdef __cplusplus extern "C" void exit (int); #endif void fnord() { int i=42;} int main () { void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); int status = $lt_dlunknown; if (self) { if (dlsym (self,"fnord")) status = $lt_dlno_uscore; else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; /* dlclose (self); */ } else puts (dlerror ()); exit (status); }] EOF if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null lt_status=$? case x$lt_status in x$lt_dlno_uscore) $1 ;; x$lt_dlneed_uscore) $2 ;; x$lt_dlunknown|x*) $3 ;; esac else : # compilation failed $3 fi fi rm -fr conftest* ])# _LT_AC_TRY_DLOPEN_SELF # AC_LIBTOOL_DLOPEN_SELF # ---------------------- AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl if test "x$enable_dlopen" != xyes; then enable_dlopen=unknown enable_dlopen_self=unknown enable_dlopen_self_static=unknown else lt_cv_dlopen=no lt_cv_dlopen_libs= case $host_os in beos*) lt_cv_dlopen="load_add_on" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ;; mingw* | pw32*) lt_cv_dlopen="LoadLibrary" lt_cv_dlopen_libs= ;; cygwin*) lt_cv_dlopen="dlopen" lt_cv_dlopen_libs= ;; darwin*) # if libdl is installed we need to link against it AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"],[ lt_cv_dlopen="dyld" lt_cv_dlopen_libs= lt_cv_dlopen_self=yes ]) ;; *) AC_CHECK_FUNC([shl_load], [lt_cv_dlopen="shl_load"], [AC_CHECK_LIB([dld], [shl_load], [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], [AC_CHECK_FUNC([dlopen], [lt_cv_dlopen="dlopen"], [AC_CHECK_LIB([dl], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], [AC_CHECK_LIB([svld], [dlopen], [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"], [AC_CHECK_LIB([dld], [dld_link], [lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld"]) ]) ]) ]) ]) ]) ;; esac if test "x$lt_cv_dlopen" != xno; then enable_dlopen=yes else enable_dlopen=no fi case $lt_cv_dlopen in dlopen) save_CPPFLAGS="$CPPFLAGS" test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" save_LDFLAGS="$LDFLAGS" wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" save_LIBS="$LIBS" LIBS="$lt_cv_dlopen_libs $LIBS" AC_CACHE_CHECK([whether a program can dlopen itself], lt_cv_dlopen_self, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) ]) if test "x$lt_cv_dlopen_self" = xyes; then wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" AC_CACHE_CHECK([whether a statically linked program can dlopen itself], lt_cv_dlopen_self_static, [dnl _LT_AC_TRY_DLOPEN_SELF( lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) ]) fi CPPFLAGS="$save_CPPFLAGS" LDFLAGS="$save_LDFLAGS" LIBS="$save_LIBS" ;; esac case $lt_cv_dlopen_self in yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; *) enable_dlopen_self=unknown ;; esac case $lt_cv_dlopen_self_static in yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; *) enable_dlopen_self_static=unknown ;; esac fi ])# AC_LIBTOOL_DLOPEN_SELF # AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) # --------------------------------- # Check to see if options -c and -o are simultaneously supported by compiler AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no $rm -r conftest 2>/dev/null mkdir conftest cd conftest mkdir out echo "$lt_simple_compile_test_code" > conftest.$ac_ext lt_compiler_flag="-o out/conftest2.$ac_objext" # Insert the option either (1) after the last *FLAGS variable, or # (2) before a word containing "conftest.", or (3) at the end. # Note that $ac_compile itself does not contain backslashes and begins # with a dollar sign (not a hyphen), so the echo should work correctly. lt_compile=`echo "$ac_compile" | $SED \ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ -e 's:$: $lt_compiler_flag:'` (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) (eval "$lt_compile" 2>out/conftest.err) ac_status=$? cat out/conftest.err >&AS_MESSAGE_LOG_FD echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD if (exit $ac_status) && test -s out/conftest2.$ac_objext then # The compiler can only warn and ignore the option if not recognized # So say no if there are warnings $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes fi fi chmod u+w . 2>&AS_MESSAGE_LOG_FD $rm conftest* # SGI C++ compiler will create directory out/ii_files/ for # template instantiation test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files $rm out/* && rmdir out cd .. rmdir conftest $rm conftest* ]) ])# AC_LIBTOOL_PROG_CC_C_O # AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) # ----------------------------------------- # Check to see if we can do hard links to lock some files if needed AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], [AC_REQUIRE([_LT_AC_LOCK])dnl hard_links="nottested" if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then # do not overwrite the value of need_locks provided by the user AC_MSG_CHECKING([if we can lock with hard links]) hard_links=yes $rm conftest* ln conftest.a conftest.b 2>/dev/null && hard_links=no touch conftest.a ln conftest.a conftest.b 2>&5 || hard_links=no ln conftest.a conftest.b 2>/dev/null && hard_links=no AC_MSG_RESULT([$hard_links]) if test "$hard_links" = no; then AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) need_locks=warn fi else need_locks=no fi ])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS # AC_LIBTOOL_OBJDIR # ----------------- AC_DEFUN([AC_LIBTOOL_OBJDIR], [AC_CACHE_CHECK([for objdir], [lt_cv_objdir], [rm -f .libs 2>/dev/null mkdir .libs 2>/dev/null if test -d .libs; then lt_cv_objdir=.libs else # MS-DOS does not allow filenames that begin with a dot. lt_cv_objdir=_libs fi rmdir .libs 2>/dev/null]) objdir=$lt_cv_objdir ])# AC_LIBTOOL_OBJDIR # AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) # ---------------------------------------------- # Check hardcoding attributes. AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], [AC_MSG_CHECKING([how to hardcode library paths into programs]) _LT_AC_TAGVAR(hardcode_action, $1)= if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then # We can hardcode non-existant directories. if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && # If the only mechanism to avoid hardcoding is shlibpath_var, we # have to relink, otherwise we might link with an installed library # when we should be linking with a yet-to-be-installed one ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then # Linking always hardcodes the temporary library directory. _LT_AC_TAGVAR(hardcode_action, $1)=relink else # We can link without hardcoding, and we can hardcode nonexisting dirs. _LT_AC_TAGVAR(hardcode_action, $1)=immediate fi else # We cannot hardcode anything, or else we can only hardcode existing # directories. _LT_AC_TAGVAR(hardcode_action, $1)=unsupported fi AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then # Fast installation is not supported enable_fast_install=no elif test "$shlibpath_overrides_runpath" = yes || test "$enable_shared" = no; then # Fast installation is not necessary enable_fast_install=needless fi ])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH # AC_LIBTOOL_SYS_LIB_STRIP # ------------------------ AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], [striplib= old_striplib= AC_MSG_CHECKING([whether stripping libraries is possible]) if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" test -z "$striplib" && striplib="$STRIP --strip-unneeded" AC_MSG_RESULT([yes]) else # FIXME - insert some real tests, host_os isn't really good enough case $host_os in darwin*) if test -n "$STRIP" ; then striplib="$STRIP -x" old_striplib="$STRIP -S" AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) fi ;; *) AC_MSG_RESULT([no]) ;; esac fi ])# AC_LIBTOOL_SYS_LIB_STRIP # AC_LIBTOOL_SYS_DYNAMIC_LINKER # ----------------------------- # PORTME Fill in your ld.so characteristics AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_MSG_CHECKING([dynamic linker characteristics]) library_names_spec= libname_spec='lib$name' soname_spec= shrext_cmds=".so" postinstall_cmds= postuninstall_cmds= finish_cmds= finish_eval= shlibpath_var= shlibpath_overrides_runpath=unknown version_type=none dynamic_linker="$host_os ld.so" sys_lib_dlsearch_path_spec="/lib /usr/lib" m4_if($1,[],[ if test "$GCC" = yes; then case $host_os in darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; *) lt_awk_arg="/^libraries:/" ;; esac lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$lt_search_path_spec" | grep ';' >/dev/null ; then # if the path contains ";" then we assume it to be the separator # otherwise default to the standard path separator (i.e. ":") - it is # assumed that no part of a normal pathname contains ";" but that should # okay in the real world where ";" in dirpaths is itself problematic. lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e 's/;/ /g'` else lt_search_path_spec=`echo "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi # Ok, now we have the path, separated by spaces, we can step through it # and add multilib dir if necessary. lt_tmp_lt_search_path_spec= lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` for lt_sys_path in $lt_search_path_spec; do if test -d "$lt_sys_path/$lt_multi_os_dir"; then lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" else test -d "$lt_sys_path" && \ lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" fi done lt_search_path_spec=`echo $lt_tmp_lt_search_path_spec | awk ' BEGIN {RS=" "; FS="/|\n";} { lt_foo=""; lt_count=0; for (lt_i = NF; lt_i > 0; lt_i--) { if ($lt_i != "" && $lt_i != ".") { if ($lt_i == "..") { lt_count++; } else { if (lt_count == 0) { lt_foo="/" $lt_i lt_foo; } else { lt_count--; } } } } if (lt_foo != "") { lt_freq[[lt_foo]]++; } if (lt_freq[[lt_foo]] == 1) { print lt_foo; } }'` sys_lib_search_path_spec=`echo $lt_search_path_spec` else sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" fi]) need_lib_prefix=unknown hardcode_into_libs=no # when you set need_version to no, make sure it does not cause -set_version # flags to be left without arguments need_version=unknown case $host_os in aix3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' shlibpath_var=LIBPATH # AIX 3 has no versioning support, so we append a major version to the name. soname_spec='${libname}${release}${shared_ext}$major' ;; aix4* | aix5*) version_type=linux need_lib_prefix=no need_version=no hardcode_into_libs=yes if test "$host_cpu" = ia64; then # AIX 5 supports IA64 library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH else # With GCC up to 2.95.x, collect2 would create an import file # for dependence libraries. The import file would start with # the line `#! .'. This would cause the generated library to # depend on `.', always an invalid library. This was fixed in # development snapshots of GCC prior to 3.0. case $host_os in aix4 | aix4.[[01]] | aix4.[[01]].*) if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' echo ' yes ' echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then : else can_build_shared=no fi ;; esac # AIX (on Power*) has no versioning support, so currently we can not hardcode correct # soname into executable. Probably we can add versioning support to # collect2, so additional links can be useful in future. if test "$aix_use_runtimelinking" = yes; then # If using run time linking (on AIX 4.2 or later) use lib.so # instead of lib.a to let people know that these are not # typical AIX shared libraries. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' else # We preserve .a as extension for shared libraries through AIX4.2 # and later when we are not doing run time linking. library_names_spec='${libname}${release}.a $libname.a' soname_spec='${libname}${release}${shared_ext}$major' fi shlibpath_var=LIBPATH fi ;; amigaos*) library_names_spec='$libname.ixlibrary $libname.a' # Create ${libname}_ixlibrary.a entries in /sys/libs. finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([[^/]]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ;; beos*) library_names_spec='${libname}${shared_ext}' dynamic_linker="$host_os ld.so" shlibpath_var=LIBRARY_PATH ;; bsdi[[45]]*) version_type=linux need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" # the default ld.so.conf also contains /usr/contrib/lib and # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow # libtool to hard-code these into programs ;; cygwin* | mingw* | pw32*) version_type=windows shrext_cmds=".dll" need_version=no need_lib_prefix=no case $GCC,$host_os in yes,cygwin* | yes,mingw* | yes,pw32*) library_names_spec='$libname.dll.a' # DLL is installed to $(libdir)/../bin by postinstall_cmds postinstall_cmds='base_file=`basename \${file}`~ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ dldir=$destdir/`dirname \$dlpath`~ test -d \$dldir || mkdir -p \$dldir~ $install_prog $dir/$dlname \$dldir/$dlname~ chmod a+x \$dldir/$dlname' postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ dlpath=$dir/\$dldll~ $rm \$dlpath' shlibpath_overrides_runpath=yes case $host_os in cygwin*) # Cygwin DLLs use 'cyg' prefix rather than 'lib' soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ;; mingw*) # MinGW DLLs use traditional 'lib' prefix soname_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` if echo "$sys_lib_search_path_spec" | [grep ';[c-zC-Z]:/' >/dev/null]; then # It is most probably a Windows format PATH printed by # mingw gcc, but we are running on Cygwin. Gcc prints its search # path with ; separators, and with drive letters. We can handle the # drive letters (cygwin fileutils understands them), so leave them, # especially as we might pass files found there to a mingw objdump, # which wouldn't understand a cygwinified path. Ahh. sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` else sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` fi ;; pw32*) # pw32 DLLs use 'pw' prefix rather than 'lib' library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' ;; esac ;; *) library_names_spec='${libname}`echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext} $libname.lib' ;; esac dynamic_linker='Win32 ld.exe' # FIXME: first we should search . and the directory the executable is in shlibpath_var=PATH ;; darwin* | rhapsody*) dynamic_linker="$host_os dyld" version_type=darwin need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' soname_spec='${libname}${release}${major}$shared_ext' shlibpath_overrides_runpath=yes shlibpath_var=DYLD_LIBRARY_PATH shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' m4_if([$1], [],[ sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib"]) sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ;; dgux*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; freebsd1*) dynamic_linker=no ;; freebsd* | dragonfly*) # DragonFly does not have aout. When/if they implement a new # versioning mechanism, adjust this. if test -x /usr/bin/objformat; then objformat=`/usr/bin/objformat` else case $host_os in freebsd[[123]]*) objformat=aout ;; *) objformat=elf ;; esac fi version_type=freebsd-$objformat case $version_type in freebsd-elf*) library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' need_version=no need_lib_prefix=no ;; freebsd-*) library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' need_version=yes ;; esac shlibpath_var=LD_LIBRARY_PATH case $host_os in freebsd2*) shlibpath_overrides_runpath=yes ;; freebsd3.[[01]]* | freebsdelf3.[[01]]*) shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; *) # from 4.6 on, and DragonFly shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; esac ;; gnu*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes ;; hpux9* | hpux10* | hpux11*) # Give a soname corresponding to the major version so that dld.sl refuses to # link against other versions. version_type=sunos need_lib_prefix=no need_version=no case $host_cpu in ia64*) shrext_cmds='.so' hardcode_into_libs=yes dynamic_linker="$host_os dld.so" shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' if test "X$HPUX_IA64_MODE" = X32; then sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" else sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" fi sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; hppa*64*) shrext_cmds='.sl' hardcode_into_libs=yes dynamic_linker="$host_os dld.sl" shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ;; *) shrext_cmds='.sl' dynamic_linker="$host_os dld.sl" shlibpath_var=SHLIB_PATH shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' ;; esac # HP-UX runs *really* slowly unless shared libraries are mode 555. postinstall_cmds='chmod 555 $lib' ;; interix[[3-9]]*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no hardcode_into_libs=yes ;; irix5* | irix6* | nonstopux*) case $host_os in nonstopux*) version_type=nonstopux ;; *) if test "$lt_cv_prog_gnu_ld" = yes; then version_type=linux else version_type=irix fi ;; esac need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' case $host_os in irix5* | nonstopux*) libsuff= shlibsuff= ;; *) case $LD in # libtool.m4 will add one of these switches to LD *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") libsuff= shlibsuff= libmagic=32-bit;; *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") libsuff=64 shlibsuff=64 libmagic=64-bit;; *) libsuff= shlibsuff= libmagic=never-match;; esac ;; esac shlibpath_var=LD_LIBRARY${shlibsuff}_PATH shlibpath_overrides_runpath=no sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" hardcode_into_libs=yes ;; # No shared lib support for Linux oldld, aout, or coff. linux*oldld* | linux*aout* | linux*coff*) dynamic_linker=no ;; # This must be Linux ELF. linux* | k*bsd*-gnu) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=no # This implies no fast_install, which is unacceptable. # Some rework will be needed to allow for fast_install # before this can be enabled. hardcode_into_libs=yes # Append ld.so.conf contents to the search path if test -f /etc/ld.so.conf; then lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" fi # We used to test for /lib/ld.so.1 and disable shared libraries on # powerpc, because MkLinux only supported shared libraries with the # GNU dynamic linker. Since this was broken with cross compilers, # most powerpc-linux boxes support dynamic linking these days and # people can always --disable-shared, the test was removed, and we # assume the GNU/Linux dynamic linker is in use. dynamic_linker='GNU/Linux ld.so' ;; netbsd*) version_type=sunos need_lib_prefix=no need_version=no if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' dynamic_linker='NetBSD (a.out) ld.so' else library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' dynamic_linker='NetBSD ld.elf_so' fi shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes ;; newsos6) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; nto-qnx*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes ;; openbsd*) version_type=sunos sys_lib_dlsearch_path_spec="/usr/lib" need_lib_prefix=no # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. case $host_os in openbsd3.3 | openbsd3.3.*) need_version=yes ;; *) need_version=no ;; esac library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' shlibpath_var=LD_LIBRARY_PATH if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then case $host_os in openbsd2.[[89]] | openbsd2.[[89]].*) shlibpath_overrides_runpath=no ;; *) shlibpath_overrides_runpath=yes ;; esac else shlibpath_overrides_runpath=yes fi ;; os2*) libname_spec='$name' shrext_cmds=".dll" need_lib_prefix=no library_names_spec='$libname${shared_ext} $libname.a' dynamic_linker='OS/2 ld.exe' shlibpath_var=LIBPATH ;; osf3* | osf4* | osf5*) version_type=osf need_lib_prefix=no need_version=no soname_spec='${libname}${release}${shared_ext}$major' library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' shlibpath_var=LD_LIBRARY_PATH sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ;; rdos*) dynamic_linker=no ;; solaris*) version_type=linux need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes hardcode_into_libs=yes # ldd complains unless libraries are executable postinstall_cmds='chmod +x $lib' ;; sunos4*) version_type=sunos library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' shlibpath_var=LD_LIBRARY_PATH shlibpath_overrides_runpath=yes if test "$with_gnu_ld" = yes; then need_lib_prefix=no fi need_version=yes ;; sysv4 | sysv4.3*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH case $host_vendor in sni) shlibpath_overrides_runpath=no need_lib_prefix=no export_dynamic_flag_spec='${wl}-Blargedynsym' runpath_var=LD_RUN_PATH ;; siemens) need_lib_prefix=no ;; motorola) need_lib_prefix=no need_version=no shlibpath_overrides_runpath=no sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ;; esac ;; sysv4*MP*) if test -d /usr/nec ;then version_type=linux library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' soname_spec='$libname${shared_ext}.$major' shlibpath_var=LD_LIBRARY_PATH fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) version_type=freebsd-elf need_lib_prefix=no need_version=no library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH hardcode_into_libs=yes if test "$with_gnu_ld" = yes; then sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' shlibpath_overrides_runpath=no else sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' shlibpath_overrides_runpath=yes case $host_os in sco3.2v5*) sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ;; esac fi sys_lib_dlsearch_path_spec='/usr/lib' ;; uts4*) version_type=linux library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' soname_spec='${libname}${release}${shared_ext}$major' shlibpath_var=LD_LIBRARY_PATH ;; *) dynamic_linker=no ;; esac AC_MSG_RESULT([$dynamic_linker]) test "$dynamic_linker" = no && can_build_shared=no variables_saved_for_relink="PATH $shlibpath_var $runpath_var" if test "$GCC" = yes; then variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" fi ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER # _LT_AC_TAGCONFIG # ---------------- AC_DEFUN([_LT_AC_TAGCONFIG], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_ARG_WITH([tags], [AC_HELP_STRING([--with-tags@<:@=TAGS@:>@], [include additional configurations @<:@automatic@:>@])], [tagnames="$withval"]) if test -f "$ltmain" && test -n "$tagnames"; then if test ! -f "${ofile}"; then AC_MSG_WARN([output file `$ofile' does not exist]) fi if test -z "$LTCC"; then eval "`$SHELL ${ofile} --config | grep '^LTCC='`" if test -z "$LTCC"; then AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) else AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) fi fi if test -z "$LTCFLAGS"; then eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" fi # Extract list of available tagged configurations in $ofile. # Note that this assumes the entire list is on one line. available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for tagname in $tagnames; do IFS="$lt_save_ifs" # Check whether tagname contains only valid characters case `$echo "X$tagname" | $Xsed -e 's:[[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]]::g'` in "") ;; *) AC_MSG_ERROR([invalid tag name: $tagname]) ;; esac if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null then AC_MSG_ERROR([tag name \"$tagname\" already exists]) fi # Update the list of available tags. if test -n "$tagname"; then echo appending configuration tag \"$tagname\" to $ofile case $tagname in CXX) if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_LIBTOOL_LANG_CXX_CONFIG else tagname="" fi ;; F77) if test -n "$F77" && test "X$F77" != "Xno"; then AC_LIBTOOL_LANG_F77_CONFIG else tagname="" fi ;; GCJ) if test -n "$GCJ" && test "X$GCJ" != "Xno"; then AC_LIBTOOL_LANG_GCJ_CONFIG else tagname="" fi ;; RC) AC_LIBTOOL_LANG_RC_CONFIG ;; *) AC_MSG_ERROR([Unsupported tag name: $tagname]) ;; esac # Append the new tag name to the list of available tags. if test -n "$tagname" ; then available_tags="$available_tags $tagname" fi fi done IFS="$lt_save_ifs" # Now substitute the updated list of available tags. if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then mv "${ofile}T" "$ofile" chmod +x "$ofile" else rm -f "${ofile}T" AC_MSG_ERROR([unable to update list of available tagged configurations.]) fi fi ])# _LT_AC_TAGCONFIG # AC_LIBTOOL_DLOPEN # ----------------- # enable checks for dlopen support AC_DEFUN([AC_LIBTOOL_DLOPEN], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_DLOPEN # AC_LIBTOOL_WIN32_DLL # -------------------- # declare package support for building win32 DLLs AC_DEFUN([AC_LIBTOOL_WIN32_DLL], [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) ])# AC_LIBTOOL_WIN32_DLL # AC_ENABLE_SHARED([DEFAULT]) # --------------------------- # implement the --enable-shared flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_SHARED], [define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([shared], [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_shared=yes ;; no) enable_shared=no ;; *) enable_shared=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_shared=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_shared=]AC_ENABLE_SHARED_DEFAULT) ])# AC_ENABLE_SHARED # AC_DISABLE_SHARED # ----------------- # set the default shared flag to --disable-shared AC_DEFUN([AC_DISABLE_SHARED], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_SHARED(no) ])# AC_DISABLE_SHARED # AC_ENABLE_STATIC([DEFAULT]) # --------------------------- # implement the --enable-static flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_STATIC], [define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([static], [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_static=yes ;; no) enable_static=no ;; *) enable_static=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_static=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_static=]AC_ENABLE_STATIC_DEFAULT) ])# AC_ENABLE_STATIC # AC_DISABLE_STATIC # ----------------- # set the default static flag to --disable-static AC_DEFUN([AC_DISABLE_STATIC], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_STATIC(no) ])# AC_DISABLE_STATIC # AC_ENABLE_FAST_INSTALL([DEFAULT]) # --------------------------------- # implement the --enable-fast-install flag # DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. AC_DEFUN([AC_ENABLE_FAST_INSTALL], [define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl AC_ARG_ENABLE([fast-install], [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], [p=${PACKAGE-default} case $enableval in yes) enable_fast_install=yes ;; no) enable_fast_install=no ;; *) enable_fast_install=no # Look at the argument we got. We use all the common list separators. lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," for pkg in $enableval; do IFS="$lt_save_ifs" if test "X$pkg" = "X$p"; then enable_fast_install=yes fi done IFS="$lt_save_ifs" ;; esac], [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) ])# AC_ENABLE_FAST_INSTALL # AC_DISABLE_FAST_INSTALL # ----------------------- # set the default to --disable-fast-install AC_DEFUN([AC_DISABLE_FAST_INSTALL], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_ENABLE_FAST_INSTALL(no) ])# AC_DISABLE_FAST_INSTALL # AC_LIBTOOL_PICMODE([MODE]) # -------------------------- # implement the --with-pic flag # MODE is either `yes' or `no'. If omitted, it defaults to `both'. AC_DEFUN([AC_LIBTOOL_PICMODE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl pic_mode=ifelse($#,1,$1,default) ])# AC_LIBTOOL_PICMODE # AC_PROG_EGREP # ------------- # This is predefined starting with Autoconf 2.54, so this conditional # definition can be removed once we require Autoconf 2.54 or later. m4_ifndef([AC_PROG_EGREP], [AC_DEFUN([AC_PROG_EGREP], [AC_CACHE_CHECK([for egrep], [ac_cv_prog_egrep], [if echo a | (grep -E '(a|b)') >/dev/null 2>&1 then ac_cv_prog_egrep='grep -E' else ac_cv_prog_egrep='egrep' fi]) EGREP=$ac_cv_prog_egrep AC_SUBST([EGREP]) ])]) # AC_PATH_TOOL_PREFIX # ------------------- # find a file program which can recognize shared library AC_DEFUN([AC_PATH_TOOL_PREFIX], [AC_REQUIRE([AC_PROG_EGREP])dnl AC_MSG_CHECKING([for $1]) AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, [case $MAGIC_CMD in [[\\/*] | ?:[\\/]*]) lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ;; *) lt_save_MAGIC_CMD="$MAGIC_CMD" lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR dnl $ac_dummy forces splitting on constant user-supplied paths. dnl POSIX.2 word splitting is done only on the output of word expansions, dnl not every word. This closes a longstanding sh security hole. ac_dummy="ifelse([$2], , $PATH, [$2])" for ac_dir in $ac_dummy; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f $ac_dir/$1; then lt_cv_path_MAGIC_CMD="$ac_dir/$1" if test -n "$file_magic_test_file"; then case $deplibs_check_method in "file_magic "*) file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | $EGREP "$file_magic_regex" > /dev/null; then : else cat <&2 *** Warning: the command libtool uses to detect shared libraries, *** $file_magic_cmd, produces output that libtool cannot recognize. *** The result is that libtool may fail to recognize shared libraries *** as such. This will affect the creation of libtool libraries that *** depend on shared libraries, but programs linked with such libtool *** libraries will work regardless of this problem. Nevertheless, you *** may want to report the problem to your system manager and/or to *** bug-libtool@gnu.org EOF fi ;; esac fi break fi done IFS="$lt_save_ifs" MAGIC_CMD="$lt_save_MAGIC_CMD" ;; esac]) MAGIC_CMD="$lt_cv_path_MAGIC_CMD" if test -n "$MAGIC_CMD"; then AC_MSG_RESULT($MAGIC_CMD) else AC_MSG_RESULT(no) fi ])# AC_PATH_TOOL_PREFIX # AC_PATH_MAGIC # ------------- # find a file program which can recognize a shared library AC_DEFUN([AC_PATH_MAGIC], [AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin$PATH_SEPARATOR$PATH) if test -z "$lt_cv_path_MAGIC_CMD"; then if test -n "$ac_tool_prefix"; then AC_PATH_TOOL_PREFIX(file, /usr/bin$PATH_SEPARATOR$PATH) else MAGIC_CMD=: fi fi ])# AC_PATH_MAGIC # AC_PROG_LD # ---------- # find the pathname to the GNU or non-GNU linker AC_DEFUN([AC_PROG_LD], [AC_ARG_WITH([gnu-ld], [AC_HELP_STRING([--with-gnu-ld], [assume the C compiler uses GNU ld @<:@default=no@:>@])], [test "$withval" = no || with_gnu_ld=yes], [with_gnu_ld=no]) AC_REQUIRE([LT_AC_PROG_SED])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl ac_prog=ld if test "$GCC" = yes; then # Check if gcc -print-prog-name=ld gives a path. AC_MSG_CHECKING([for ld used by $CC]) case $host in *-*-mingw*) # gcc leaves a trailing carriage return which upsets mingw ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; *) ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; esac case $ac_prog in # Accept absolute paths. [[\\/]]* | ?:[[\\/]]*) re_direlt='/[[^/]][[^/]]*/\.\./' # Canonicalize the pathname of ld ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` done test -z "$LD" && LD="$ac_prog" ;; "") # If it fails, then pretend we aren't using GCC. ac_prog=ld ;; *) # If it is relative, then search for the first ld in PATH. with_gnu_ld=unknown ;; esac elif test "$with_gnu_ld" = yes; then AC_MSG_CHECKING([for GNU ld]) else AC_MSG_CHECKING([for non-GNU ld]) fi AC_CACHE_VAL(lt_cv_path_LD, [if test -z "$LD"; then lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then lt_cv_path_LD="$ac_dir/$ac_prog" # Check to see if the program is GNU ld. I'd rather use --version, # but apparently some variants of GNU ld only accept -v. # Break only if it was the GNU/non-GNU ld that we prefer. case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null 2>&1; then lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' lt_cv_file_magic_cmd='func_win32_libid' else lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' lt_cv_file_magic_cmd='$OBJDUMP -f' fi ;; darwin* | rhapsody*) lt_cv_deplibs_check_method=pass_all ;; freebsd* | dragonfly*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then case $host_cpu in i*86 ) # Not sure whether the presence of OpenBSD here was a mistake. # Let's accept both of them until this is cleared up. lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` ;; esac else lt_cv_deplibs_check_method=pass_all fi ;; gnu*) lt_cv_deplibs_check_method=pass_all ;; hpux10.20* | hpux11*) lt_cv_file_magic_cmd=/usr/bin/file case $host_cpu in ia64*) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ;; hppa*64*) [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]'] lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl ;; *) lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|PA-RISC[[0-9]].[[0-9]]) shared library' lt_cv_file_magic_test_file=/usr/lib/libc.sl ;; esac ;; interix[[3-9]]*) # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ;; irix5* | irix6* | nonstopux*) case $LD in *-32|*"-32 ") libmagic=32-bit;; *-n32|*"-n32 ") libmagic=N32;; *-64|*"-64 ") libmagic=64-bit;; *) libmagic=never-match;; esac lt_cv_deplibs_check_method=pass_all ;; # This must be Linux ELF. linux* | k*bsd*-gnu) lt_cv_deplibs_check_method=pass_all ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|_pic\.a)$' fi ;; newos6*) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (executable|dynamic lib)' lt_cv_file_magic_cmd=/usr/bin/file lt_cv_file_magic_test_file=/usr/lib/libnls.so ;; nto-qnx*) lt_cv_deplibs_check_method=unknown ;; openbsd*) if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' else lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' fi ;; osf3* | osf4* | osf5*) lt_cv_deplibs_check_method=pass_all ;; rdos*) lt_cv_deplibs_check_method=pass_all ;; solaris*) lt_cv_deplibs_check_method=pass_all ;; sysv4 | sysv4.3*) case $host_vendor in motorola) lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` ;; ncr) lt_cv_deplibs_check_method=pass_all ;; sequent) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB (shared object|dynamic lib )' ;; sni) lt_cv_file_magic_cmd='/bin/file' lt_cv_deplibs_check_method="file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB dynamic lib" lt_cv_file_magic_test_file=/lib/libc.so ;; siemens) lt_cv_deplibs_check_method=pass_all ;; pc) lt_cv_deplibs_check_method=pass_all ;; esac ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) lt_cv_deplibs_check_method=pass_all ;; esac ]) file_magic_cmd=$lt_cv_file_magic_cmd deplibs_check_method=$lt_cv_deplibs_check_method test -z "$deplibs_check_method" && deplibs_check_method=unknown ])# AC_DEPLIBS_CHECK_METHOD # AC_PROG_NM # ---------- # find the pathname to a BSD-compatible name lister AC_DEFUN([AC_PROG_NM], [AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, [if test -n "$NM"; then # Let the user override the test. lt_cv_path_NM="$NM" else lt_nm_to_check="${ac_tool_prefix}nm" if test -n "$ac_tool_prefix" && test "$build" = "$host"; then lt_nm_to_check="$lt_nm_to_check nm" fi for lt_tmp_nm in $lt_nm_to_check; do lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do IFS="$lt_save_ifs" test -z "$ac_dir" && ac_dir=. tmp_nm="$ac_dir/$lt_tmp_nm" if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then # Check to see if the nm accepts a BSD-compat flag. # Adding the `sed 1q' prevents false positives on HP-UX, which says: # nm: unknown option "B" ignored # Tru64's nm complains that /dev/null is an invalid object file case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in */dev/null* | *'Invalid file or object type'*) lt_cv_path_NM="$tmp_nm -B" break ;; *) case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in */dev/null*) lt_cv_path_NM="$tmp_nm -p" break ;; *) lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but continue # so that we can try to find one that supports BSD flags ;; esac ;; esac fi done IFS="$lt_save_ifs" done test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm fi]) NM="$lt_cv_path_NM" ])# AC_PROG_NM # AC_CHECK_LIBM # ------------- # check for math library AC_DEFUN([AC_CHECK_LIBM], [AC_REQUIRE([AC_CANONICAL_HOST])dnl LIBM= case $host in *-*-beos* | *-*-cygwin* | *-*-pw32* | *-*-darwin*) # These system don't have libm, or don't need it ;; *-ncr-sysv4.3*) AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") AC_CHECK_LIB(m, cos, LIBM="$LIBM -lm") ;; *) AC_CHECK_LIB(m, cos, LIBM="-lm") ;; esac ])# AC_CHECK_LIBM # AC_LIBLTDL_CONVENIENCE([DIRECTORY]) # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl convenience library and # LTDLINCL to the include flags for the libltdl header and adds # --enable-ltdl-convenience to the configure arguments. Note that # AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, # it is assumed to be `libltdl'. LIBLTDL will be prefixed with # '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' # (note the single quotes!). If your package is not flat and you're not # using automake, define top_builddir and top_srcdir appropriately in # the Makefiles. AC_DEFUN([AC_LIBLTDL_CONVENIENCE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl case $enable_ltdl_convenience in no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; "") enable_ltdl_convenience=yes ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; esac LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" ])# AC_LIBLTDL_CONVENIENCE # AC_LIBLTDL_INSTALLABLE([DIRECTORY]) # ----------------------------------- # sets LIBLTDL to the link flags for the libltdl installable library and # LTDLINCL to the include flags for the libltdl header and adds # --enable-ltdl-install to the configure arguments. Note that # AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, # and an installed libltdl is not found, it is assumed to be `libltdl'. # LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with # '${top_srcdir}/' (note the single quotes!). If your package is not # flat and you're not using automake, define top_builddir and top_srcdir # appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. AC_DEFUN([AC_LIBLTDL_INSTALLABLE], [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl AC_CHECK_LIB(ltdl, lt_dlinit, [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], [if test x"$enable_ltdl_install" = xno; then AC_MSG_WARN([libltdl not installed, but installation disabled]) else enable_ltdl_install=yes fi ]) if test x"$enable_ltdl_install" = x"yes"; then ac_configure_args="$ac_configure_args --enable-ltdl-install" LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la LTDLINCL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) else ac_configure_args="$ac_configure_args --enable-ltdl-install=no" LIBLTDL="-lltdl" LTDLINCL= fi # For backwards non-gettext consistent compatibility... INCLTDL="$LTDLINCL" ])# AC_LIBLTDL_INSTALLABLE # AC_LIBTOOL_CXX # -------------- # enable support for C++ libraries AC_DEFUN([AC_LIBTOOL_CXX], [AC_REQUIRE([_LT_AC_LANG_CXX]) ])# AC_LIBTOOL_CXX # _LT_AC_LANG_CXX # --------------- AC_DEFUN([_LT_AC_LANG_CXX], [AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) ])# _LT_AC_LANG_CXX # _LT_AC_PROG_CXXCPP # ------------------ AC_DEFUN([_LT_AC_PROG_CXXCPP], [ AC_REQUIRE([AC_PROG_CXX]) if test -n "$CXX" && ( test "X$CXX" != "Xno" && ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || (test "X$CXX" != "Xg++"))) ; then AC_PROG_CXXCPP fi ])# _LT_AC_PROG_CXXCPP # AC_LIBTOOL_F77 # -------------- # enable support for Fortran 77 libraries AC_DEFUN([AC_LIBTOOL_F77], [AC_REQUIRE([_LT_AC_LANG_F77]) ])# AC_LIBTOOL_F77 # _LT_AC_LANG_F77 # --------------- AC_DEFUN([_LT_AC_LANG_F77], [AC_REQUIRE([AC_PROG_F77]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}F77]) ])# _LT_AC_LANG_F77 # AC_LIBTOOL_GCJ # -------------- # enable support for GCJ libraries AC_DEFUN([AC_LIBTOOL_GCJ], [AC_REQUIRE([_LT_AC_LANG_GCJ]) ])# AC_LIBTOOL_GCJ # _LT_AC_LANG_GCJ # --------------- AC_DEFUN([_LT_AC_LANG_GCJ], [AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}GCJ]) ])# _LT_AC_LANG_GCJ # AC_LIBTOOL_RC # ------------- # enable support for Windows resource files AC_DEFUN([AC_LIBTOOL_RC], [AC_REQUIRE([LT_AC_PROG_RC]) _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}RC]) ])# AC_LIBTOOL_RC # AC_LIBTOOL_LANG_C_CONFIG # ------------------------ # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) AC_DEFUN([_LT_AC_LANG_C_CONFIG], [lt_save_CC="$CC" AC_LANG_PUSH(C) # Source file extension for C test sources. ac_ext=c # Object file extension for compiled C test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(){return(0);}' _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_SYS_LIB_STRIP AC_LIBTOOL_DLOPEN_SELF # Report which library types will actually be built AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix4* | aix5*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_C_CONFIG # AC_LIBTOOL_LANG_CXX_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], [AC_LANG_PUSH(C++) AC_REQUIRE([AC_PROG_CXX]) AC_REQUIRE([_LT_AC_PROG_CXXCPP]) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_AC_TAGVAR(no_undefined_flag, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Dependencies to place before and after the object being linked: _LT_AC_TAGVAR(predep_objects, $1)= _LT_AC_TAGVAR(postdep_objects, $1)= _LT_AC_TAGVAR(predeps, $1)= _LT_AC_TAGVAR(postdeps, $1)= _LT_AC_TAGVAR(compiler_lib_search_path, $1)= # Source file extension for C++ test sources. ac_ext=cpp # Object file extension for compiled C++ test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="int some_variable = 0;" # Code to be used in simple link tests lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC=$CC lt_save_LD=$LD lt_save_GCC=$GCC GCC=$GXX lt_save_with_gnu_ld=$with_gnu_ld lt_save_path_LD=$lt_cv_path_LD if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx else $as_unset lt_cv_prog_gnu_ld fi if test -n "${lt_cv_path_LDCXX+set}"; then lt_cv_path_LD=$lt_cv_path_LDCXX else $as_unset lt_cv_path_LD fi test -z "${LDCXX+set}" || LD=$LDCXX CC=${CXX-"c++"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) # We don't want -fno-exception wen compiling C++ code, so set the # no_builtin_flag separately if test "$GXX" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' else _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= fi if test "$GXX" = yes; then # Set up default GNU C++ configuration AC_PROG_LD # Check if GNU C++ uses GNU ld as the underlying linker, since the # archiving commands below assume that GNU ld is being used. if test "$with_gnu_ld" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # If archive_cmds runs LD, not CC, wlarc should be empty # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to # investigate it a little bit more. (MM) wlarc='${wl}' # ancient GNU ld didn't support --whole-archive et. al. if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ grep 'no-whole-archive' > /dev/null; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else with_gnu_ld=no wlarc= # A generic and very simple default shared library creation # command for GNU C++ for the case where it uses the native # linker, instead of GNU ld. If possible, this setting should # overridden to take advantage of the native linker features on # the platform it is being used on. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' fi # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else GXX=no with_gnu_ld=no wlarc= fi # PORTME: fill in a description of your system's C++ link characteristics AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) _LT_AC_TAGVAR(ld_shlibs, $1)=yes case $host_os in aix3*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) for ld_flag in $LDFLAGS; do case $ld_flag in *-brtl*) aix_use_runtimelinking=yes break ;; esac done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_AC_TAGVAR(archive_cmds, $1)='' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GXX" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; chorus*) case $cc_basename in *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; darwin* | rhapsody*) case $host_os in rhapsody* | darwin1.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GXX" = yes ; then lt_int_apple_cc_single_mod=no output_verbose_link_cmd='echo' if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then lt_int_apple_cc_single_mod=yes fi if test "X$lt_int_apple_cc_single_mod" = Xyes ; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' fi _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds if test "X$lt_int_apple_cc_single_mod" = Xyes ; then _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' fi _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else case $cc_basename in xlc*) output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ;; dgux*) case $cc_basename in ec++*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; ghcx*) # Green Hills C++ Compiler # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; freebsd[[12]]*) # C++ shared libraries reported to be fairly broken before switch to ELF _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; freebsd-elf*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; freebsd* | dragonfly*) # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF # conventions _LT_AC_TAGVAR(ld_shlibs, $1)=yes ;; gnu*) ;; hpux9*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aCC*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; hpux10*|hpux11*) if test $with_gnu_ld = no; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) ;; *) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; esac fi case $host_cpu in hppa*64*|ia64*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, # but as the default # location of the library. ;; esac case $cc_basename in CC*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; aCC*) case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes; then if test $with_gnu_ld = no; then case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ;; esac fi else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; interix[[3-9]]*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; irix5* | irix6*) case $cc_basename in CC*) # SGI C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' # Archives containing C++ object files must be created using # "CC -ar", where "CC" is the IRIX C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' ;; *) if test "$GXX" = yes; then if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' fi fi _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; esac _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; linux* | k*bsd*-gnu) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; icpc*) # Intel C++ with_gnu_ld=yes # version 8.0 and above of icpc choke on multiply defined symbols # if we add $predep_objects and $postdep_objects, however 7.1 and # earlier do not add the objects themselves. case `$CC -V 2>&1` in *"Version 7."*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; *) # Version 8.0 or newer tmp_idyn= case $host_cpu in ia64*) tmp_idyn=' -i_dynamic';; esac _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ;; esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ;; pgCC*) # Portland Group C++ compiler _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ;; cxx*) # Compaq C++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file ${wl}$export_symbols' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' # Not sure whether something based on # $CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 # would be better. output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; esac ;; esac ;; lynxos*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; m88k*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; mvs*) case $cc_basename in cxx*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' wlarc= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no fi # Workaround some broken pre-1.5 toolchains output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ;; openbsd2*) # C++ shared libraries are fairly broken _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' fi output_verbose_link_cmd='echo' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; osf3*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # "CC -Bstatic", where "CC" is the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; osf4* | osf5*) case $cc_basename in KCC*) # Kuck and Associates, Inc. (KAI) C++ Compiler # KCC will only create a shared library if the output file # ends with ".so" (or ".sl" for HP-UX), so rename the library # to its proper name (with version) after linking. _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Archives containing C++ object files must be created using # the KAI C++ compiler. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' ;; RCC*) # Rational C++ 2.4.1 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; cxx*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ echo "-hidden">> $lib.exp~ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ $rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. # # There doesn't appear to be a way to prevent this compiler from # explicitly linking system object files so we need to strip them # from the output so that they don't get included in the library # dependencies. output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ;; *) if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' else # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; psos*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; lcc*) # Lucid # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. # Supported since Solaris 2.6 (maybe 2.5.1?) _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes output_verbose_link_cmd='echo' # Archives containing C++ object files must be created using # "CC -xar", where "CC" is the Sun C++ compiler. This is # necessary to make sure instantiated templates are included # in the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' ;; gcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' # The C++ compiler must be used to create the archive. _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ;; *) # GNU C++ compiler with Solaris linker if test "$GXX" = yes && test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' if $CC --version | grep -v '^2\.7' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" else # g++ 2.7 appears to require `-G' NOT `-shared' on this # platform. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' # Commands to make compiler produce verbose output that lists # what "hidden" libraries, object files and flags are used when # linking a shared library. output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ;; esac fi ;; esac ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. # For security reasons, it is highly recommended that you always # use absolute paths for naming shared libraries, and exclude the # DT_RUNPATH tag from executables and libraries. But doing so # requires that you compile everything twice, which is a pain. # So that behaviour is only enabled if SCOABSPATH is set to a # non-empty value in the environment. Most likely only useful for # creating official distributions of packages. # This is a hack until libtool officially supports absolute path # names for shared libraries. _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' case $cc_basename in CC*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac ;; vxworks*) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; *) # FIXME: insert proper C++ library support _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no _LT_AC_TAGVAR(GCC, $1)="$GXX" _LT_AC_TAGVAR(LD, $1)="$LD" AC_LIBTOOL_POSTDEP_PREDEP($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC=$lt_save_CC LDCXX=$LD LD=$lt_save_LD GCC=$lt_save_GCC with_gnu_ldcxx=$with_gnu_ld with_gnu_ld=$lt_save_with_gnu_ld lt_cv_path_LDCXX=$lt_cv_path_LD lt_cv_path_LD=$lt_save_path_LD lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ])# AC_LIBTOOL_LANG_CXX_CONFIG # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) # ------------------------------------ # Figure out "hidden" library dependencies from verbose # compiler output when linking a shared library. # Parse the compiler output and extract the necessary # objects, libraries and library flags. AC_DEFUN([AC_LIBTOOL_POSTDEP_PREDEP],[ dnl we can't use the lt_simple_compile_test_code here, dnl because it contains code intended for an executable, dnl not a library. It's possible we should let each dnl tag define a new lt_????_link_test_code variable, dnl but it's only used here... ifelse([$1],[],[cat > conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext < conftest.$ac_ext <&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 # # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac if test "$solaris_use_stlport4" != yes; then _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; solaris*) case $cc_basename in CC*) # The more standards-conforming stlport4 library is # incompatible with the Cstd library. Avoid specifying # it if it's in CXXFLAGS. Ignore libCrun as # -library=stlport4 depends on it. case " $CXX $CXXFLAGS " in *" -library=stlport4 "*) solaris_use_stlport4=yes ;; esac # Adding this requires a known-good setup of shared libraries for # Sun compiler versions before 5.6, else PIC objects from an old # archive will be linked into the output, leading to subtle bugs. if test "$solaris_use_stlport4" != yes; then _LT_AC_TAGVAR(postdeps,$1)='-library=Cstd -library=Crun' fi ;; esac ;; esac ]) case " $_LT_AC_TAGVAR(postdeps, $1) " in *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; esac ])# AC_LIBTOOL_POSTDEP_PREDEP # AC_LIBTOOL_LANG_F77_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_F77_CONFIG], [_LT_AC_LANG_F77_CONFIG(F77)]) AC_DEFUN([_LT_AC_LANG_F77_CONFIG], [AC_REQUIRE([AC_PROG_F77]) AC_LANG_PUSH(Fortran 77) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds _LT_AC_TAGVAR(no_undefined_flag, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no # Source file extension for f77 test sources. ac_ext=f # Object file extension for compiled f77 test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="\ subroutine t return end " # Code to be used in simple link tests lt_simple_link_test_code="\ program t end " # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${F77-"f77"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) AC_MSG_CHECKING([if libtool supports shared libraries]) AC_MSG_RESULT([$can_build_shared]) AC_MSG_CHECKING([whether to build shared libraries]) test "$can_build_shared" = "no" && enable_shared=no # On AIX, shared libraries and static libraries use the same namespace, and # are all built from PIC. case $host_os in aix3*) test "$enable_shared" = yes && enable_static=no if test -n "$RANLIB"; then archive_cmds="$archive_cmds~\$RANLIB \$lib" postinstall_cmds='$RANLIB $lib' fi ;; aix4* | aix5*) if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then test "$enable_shared" = yes && enable_static=no fi ;; esac AC_MSG_RESULT([$enable_shared]) AC_MSG_CHECKING([whether to build static libraries]) # Make sure either enable_shared or enable_static is yes. test "$enable_shared" = yes || enable_static=yes AC_MSG_RESULT([$enable_static]) _LT_AC_TAGVAR(GCC, $1)="$G77" _LT_AC_TAGVAR(LD, $1)="$LD" AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_CONFIG($1) AC_LANG_POP CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_F77_CONFIG # AC_LIBTOOL_LANG_GCJ_CONFIG # -------------------------- # Ensure that the configuration vars for the C compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_GCJ_CONFIG], [_LT_AC_LANG_GCJ_CONFIG(GCJ)]) AC_DEFUN([_LT_AC_LANG_GCJ_CONFIG], [AC_LANG_SAVE # Source file extension for Java test sources. ac_ext=java # Object file extension for compiled Java test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code="class foo {}" # Code to be used in simple link tests lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }' # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${GCJ-"gcj"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) # GCJ did not exist at the time GCC didn't implicitly link libc in. _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) AC_LIBTOOL_PROG_COMPILER_PIC($1) AC_LIBTOOL_PROG_CC_C_O($1) AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) AC_LIBTOOL_PROG_LD_SHLIBS($1) AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) AC_LIBTOOL_CONFIG($1) AC_LANG_RESTORE CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_GCJ_CONFIG # AC_LIBTOOL_LANG_RC_CONFIG # ------------------------- # Ensure that the configuration vars for the Windows resource compiler are # suitably defined. Those variables are subsequently used by # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. AC_DEFUN([AC_LIBTOOL_LANG_RC_CONFIG], [_LT_AC_LANG_RC_CONFIG(RC)]) AC_DEFUN([_LT_AC_LANG_RC_CONFIG], [AC_LANG_SAVE # Source file extension for RC test sources. ac_ext=rc # Object file extension for compiled RC test sources. objext=o _LT_AC_TAGVAR(objext, $1)=$objext # Code to be used in simple compile tests lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }' # Code to be used in simple link tests lt_simple_link_test_code="$lt_simple_compile_test_code" # ltmain only uses $CC for tagged configurations so make sure $CC is set. _LT_AC_SYS_COMPILER # save warnings/boilerplate of simple test code _LT_COMPILER_BOILERPLATE _LT_LINKER_BOILERPLATE # Allow CC to be a program name with arguments. lt_save_CC="$CC" CC=${RC-"windres"} compiler=$CC _LT_AC_TAGVAR(compiler, $1)=$CC _LT_CC_BASENAME([$compiler]) _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes AC_LIBTOOL_CONFIG($1) AC_LANG_RESTORE CC="$lt_save_CC" ])# AC_LIBTOOL_LANG_RC_CONFIG # AC_LIBTOOL_CONFIG([TAGNAME]) # ---------------------------- # If TAGNAME is not passed, then create an initial libtool script # with a default configuration from the untagged config vars. Otherwise # add code to config.status for appending the configuration named by # TAGNAME from the matching tagged config vars. AC_DEFUN([AC_LIBTOOL_CONFIG], [# The else clause should only fire when bootstrapping the # libtool distribution, otherwise you forgot to ship ltmain.sh # with your package, and you will get complaints that there are # no rules to generate ltmain.sh. if test -f "$ltmain"; then # See if we are running on zsh, and set the options which allow our commands through # without removal of \ escapes. if test -n "${ZSH_VERSION+set}" ; then setopt NO_GLOB_SUBST fi # Now quote all the things that may contain metacharacters while being # careful not to overquote the AC_SUBSTed values. We take copies of the # variables and quote the copies for generation of the libtool script. for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ SED SHELL STRIP \ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ deplibs_check_method reload_flag reload_cmds need_locks \ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ lt_cv_sys_global_symbol_to_c_name_address \ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ old_postinstall_cmds old_postuninstall_cmds \ _LT_AC_TAGVAR(compiler, $1) \ _LT_AC_TAGVAR(CC, $1) \ _LT_AC_TAGVAR(LD, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_static, $1) \ _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) \ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1) \ _LT_AC_TAGVAR(thread_safe_flag_spec, $1) \ _LT_AC_TAGVAR(whole_archive_flag_spec, $1) \ _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) \ _LT_AC_TAGVAR(old_archive_cmds, $1) \ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) \ _LT_AC_TAGVAR(predep_objects, $1) \ _LT_AC_TAGVAR(postdep_objects, $1) \ _LT_AC_TAGVAR(predeps, $1) \ _LT_AC_TAGVAR(postdeps, $1) \ _LT_AC_TAGVAR(compiler_lib_search_path, $1) \ _LT_AC_TAGVAR(archive_cmds, $1) \ _LT_AC_TAGVAR(archive_expsym_cmds, $1) \ _LT_AC_TAGVAR(postinstall_cmds, $1) \ _LT_AC_TAGVAR(postuninstall_cmds, $1) \ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) \ _LT_AC_TAGVAR(allow_undefined_flag, $1) \ _LT_AC_TAGVAR(no_undefined_flag, $1) \ _LT_AC_TAGVAR(export_symbols_cmds, $1) \ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) \ _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) \ _LT_AC_TAGVAR(hardcode_libdir_separator, $1) \ _LT_AC_TAGVAR(hardcode_automatic, $1) \ _LT_AC_TAGVAR(module_cmds, $1) \ _LT_AC_TAGVAR(module_expsym_cmds, $1) \ _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) \ _LT_AC_TAGVAR(fix_srcfile_path, $1) \ _LT_AC_TAGVAR(exclude_expsyms, $1) \ _LT_AC_TAGVAR(include_expsyms, $1); do case $var in _LT_AC_TAGVAR(old_archive_cmds, $1) | \ _LT_AC_TAGVAR(old_archive_from_new_cmds, $1) | \ _LT_AC_TAGVAR(archive_cmds, $1) | \ _LT_AC_TAGVAR(archive_expsym_cmds, $1) | \ _LT_AC_TAGVAR(module_cmds, $1) | \ _LT_AC_TAGVAR(module_expsym_cmds, $1) | \ _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) | \ _LT_AC_TAGVAR(export_symbols_cmds, $1) | \ extract_expsyms_cmds | reload_cmds | finish_cmds | \ postinstall_cmds | postuninstall_cmds | \ old_postinstall_cmds | old_postuninstall_cmds | \ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) # Double-quote double-evaled strings. eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ;; *) eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ;; esac done case $lt_echo in *'\[$]0 --fallback-echo"') lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\[$]0 --fallback-echo"[$]/[$]0 --fallback-echo"/'` ;; esac ifelse([$1], [], [cfgfile="${ofile}T" trap "$rm \"$cfgfile\"; exit 1" 1 2 15 $rm -f "$cfgfile" AC_MSG_NOTICE([creating $ofile])], [cfgfile="$ofile"]) cat <<__EOF__ >> "$cfgfile" ifelse([$1], [], [#! $SHELL # `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. # Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) # NOTE: Changes made to this file will be lost: look at ltmain.sh. # # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007 # Free Software Foundation, Inc. # # This file is part of GNU Libtool: # Originally by Gordon Matzigkeit , 1996 # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # A sed program that does not truncate output. SED=$lt_SED # Sed that helps us avoid accidentally triggering echo(1) options like -n. Xsed="$SED -e 1s/^X//" # The HP-UX ksh and POSIX shell print the target directory to stdout # if CDPATH is set. (unset CDPATH) >/dev/null 2>&1 && unset CDPATH # The names of the tagged configurations supported by this script. available_tags= # ### BEGIN LIBTOOL CONFIG], [# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: # Shell to use when invoking shell scripts. SHELL=$lt_SHELL # Whether or not to build shared libraries. build_libtool_libs=$enable_shared # Whether or not to build static libraries. build_old_libs=$enable_static # Whether or not to add -lc for building shared libraries. build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) # Whether or not to disallow shared libs when runtime libs are static allow_libtool_libs_with_static_runtimes=$_LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1) # Whether or not to optimize for fast installation. fast_install=$enable_fast_install # The host system. host_alias=$host_alias host=$host host_os=$host_os # The build system. build_alias=$build_alias build=$build build_os=$build_os # An echo program that does not interpret backslashes. echo=$lt_echo # The archiver. AR=$lt_AR AR_FLAGS=$lt_AR_FLAGS # A C compiler. LTCC=$lt_LTCC # LTCC compiler flags. LTCFLAGS=$lt_LTCFLAGS # A language-specific compiler. CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) # Is the compiler the GNU C compiler? with_gcc=$_LT_AC_TAGVAR(GCC, $1) # An ERE matcher. EGREP=$lt_EGREP # The linker used to build libraries. LD=$lt_[]_LT_AC_TAGVAR(LD, $1) # Whether we need hard or soft links. LN_S=$lt_LN_S # A BSD-compatible nm program. NM=$lt_NM # A symbol stripping program STRIP=$lt_STRIP # Used to examine libraries when file_magic_cmd begins "file" MAGIC_CMD=$MAGIC_CMD # Used on cygwin: DLL creation program. DLLTOOL="$DLLTOOL" # Used on cygwin: object dumper. OBJDUMP="$OBJDUMP" # Used on cygwin: assembler. AS="$AS" # The name of the directory that contains temporary libtool files. objdir=$objdir # How to create reloadable object files. reload_flag=$lt_reload_flag reload_cmds=$lt_reload_cmds # How to pass a linker flag through the compiler. wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) # Object file suffix (normally "o"). objext="$ac_objext" # Old archive suffix (normally "a"). libext="$libext" # Shared library suffix (normally ".so"). shrext_cmds='$shrext_cmds' # Executable file suffix (normally ""). exeext="$exeext" # Additional compiler flags for building library objects. pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) pic_mode=$pic_mode # What is the maximum length of a command? max_cmd_len=$lt_cv_sys_max_cmd_len # Does compiler simultaneously support -c and -o options? compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) # Must we lock files when doing compilation? need_locks=$lt_need_locks # Do we need the lib prefix for modules? need_lib_prefix=$need_lib_prefix # Do we need a version for libraries? need_version=$need_version # Whether dlopen is supported. dlopen_support=$enable_dlopen # Whether dlopen of programs is supported. dlopen_self=$enable_dlopen_self # Whether dlopen of statically linked programs is supported. dlopen_self_static=$enable_dlopen_self_static # Compiler flag to prevent dynamic linking. link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) # Compiler flag to turn off builtin functions. no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) # Compiler flag to allow reflexive dlopens. export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) # Compiler flag to generate shared objects directly from archives. whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) # Compiler flag to generate thread-safe objects. thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) # Library versioning type. version_type=$version_type # Format of library name prefix. libname_spec=$lt_libname_spec # List of archive names. First name is the real one, the rest are links. # The last name is the one that the linker finds with -lNAME. library_names_spec=$lt_library_names_spec # The coded name of the library, if different from the real name. soname_spec=$lt_soname_spec # Commands used to build and install an old-style archive. RANLIB=$lt_RANLIB old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) old_postinstall_cmds=$lt_old_postinstall_cmds old_postuninstall_cmds=$lt_old_postuninstall_cmds # Create an old-style archive from a shared archive. old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) # Create a temporary old-style archive to link instead of a shared archive. old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) # Commands used to build and install a shared archive. archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) postinstall_cmds=$lt_postinstall_cmds postuninstall_cmds=$lt_postuninstall_cmds # Commands used to build a loadable module (assumed same as above if empty) module_cmds=$lt_[]_LT_AC_TAGVAR(module_cmds, $1) module_expsym_cmds=$lt_[]_LT_AC_TAGVAR(module_expsym_cmds, $1) # Commands to strip libraries. old_striplib=$lt_old_striplib striplib=$lt_striplib # Dependencies to place before the objects being linked to create a # shared library. predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) # Dependencies to place after the objects being linked to create a # shared library. postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) # Dependencies to place before the objects being linked to create a # shared library. predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) # Dependencies to place after the objects being linked to create a # shared library. postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) # The library search path used internally by the compiler when linking # a shared library. compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) # Method to check whether dependent libraries are shared objects. deplibs_check_method=$lt_deplibs_check_method # Command to use when deplibs_check_method == file_magic. file_magic_cmd=$lt_file_magic_cmd # Flag that allows shared libraries with undefined symbols to be built. allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) # Flag that forces no undefined symbols. no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) # Commands used to finish a libtool library installation in a directory. finish_cmds=$lt_finish_cmds # Same as above, but a single script fragment to be evaled but not shown. finish_eval=$lt_finish_eval # Take the output of nm and produce a listing of raw symbols and C names. global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe # Transform the output of nm in a proper C declaration global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl # Transform the output of nm in a C name address pair global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address # This is the shared library runtime path variable. runpath_var=$runpath_var # This is the shared library path variable. shlibpath_var=$shlibpath_var # Is shlibpath searched before the hard-coded library search path? shlibpath_overrides_runpath=$shlibpath_overrides_runpath # How to hardcode a shared library path into an executable. hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) # Whether we should hardcode library paths into libraries. hardcode_into_libs=$hardcode_into_libs # Flag to hardcode \$libdir into a binary during linking. # This must work even if \$libdir does not exist. hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) # If ld is used when linking, flag to hardcode \$libdir into # a binary during linking. This must work even if \$libdir does # not exist. hardcode_libdir_flag_spec_ld=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1) # Whether we need a single -rpath flag with a separated argument. hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) # Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the # resulting binary. hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) # Set to yes if using the -LDIR flag during linking hardcodes DIR into the # resulting binary. hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into # the resulting binary. hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) # Set to yes if building a shared library automatically hardcodes DIR into the library # and all subsequent libraries and executables linked against it. hardcode_automatic=$_LT_AC_TAGVAR(hardcode_automatic, $1) # Variables whose values should be saved in libtool wrapper scripts and # restored at relink time. variables_saved_for_relink="$variables_saved_for_relink" # Whether libtool must link a program against all its dependency libraries. link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) # Compile-time system search path for libraries sys_lib_search_path_spec=$lt_sys_lib_search_path_spec # Run-time system search path for libraries sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec # Fix the shell variable \$srcfile for the compiler. fix_srcfile_path=$lt_fix_srcfile_path # Set to yes if exported symbols are required. always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) # The commands to list exported symbols. export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) # The commands to extract the exported symbol list from a shared archive. extract_expsyms_cmds=$lt_extract_expsyms_cmds # Symbols that should not be listed in the preloaded symbols. exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) # Symbols that must always be exported. include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) ifelse([$1],[], [# ### END LIBTOOL CONFIG], [# ### END LIBTOOL TAG CONFIG: $tagname]) __EOF__ ifelse([$1],[], [ case $host_os in aix3*) cat <<\EOF >> "$cfgfile" # AIX sometimes has problems with the GCC collect2 program. For some # reason, if we set the COLLECT_NAMES environment variable, the problems # vanish in a puff of smoke. if test "X${COLLECT_NAMES+set}" != Xset; then COLLECT_NAMES= export COLLECT_NAMES fi EOF ;; esac # We use sed instead of cat because bash on DJGPP gets confused if # if finds mixed CR/LF and LF-only lines. Since sed operates in # text mode, it properly converts lines to CR/LF. This bash problem # is reportedly fixed, but why not run on old versions too? sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) mv -f "$cfgfile" "$ofile" || \ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") chmod +x "$ofile" ]) else # If there is no Makefile yet, we rely on a make rule to execute # `config.status --recheck' to rerun these tests and create the # libtool script then. ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` if test -f "$ltmain_in"; then test -f Makefile && make "$ltmain" fi fi ])# AC_LIBTOOL_CONFIG # AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) # ------------------------------------------- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], [AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= if test "$GCC" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], lt_cv_prog_compiler_rtti_exceptions, [-fno-rtti -fno-exceptions], [], [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) fi ])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # --------------------------------- AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], [AC_REQUIRE([AC_CANONICAL_HOST]) AC_REQUIRE([LT_AC_PROG_SED]) AC_REQUIRE([AC_PROG_NM]) AC_REQUIRE([AC_OBJEXT]) # Check for command to grab the raw symbol name followed by C symbol from nm. AC_MSG_CHECKING([command to parse $NM output from $compiler object]) AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], [ # These are sane defaults that work on at least a few old systems. # [They come from Ultrix. What could be older than Ultrix?!! ;)] # Character class describing NM global symbol codes. symcode='[[BCDEGRST]]' # Regexp to match symbols that can be accessed directly from C. sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' # Transform an extracted symbol line into a proper C declaration lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" # Transform an extracted symbol line into symbol name and symbol address lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" # Define system-specific variables. case $host_os in aix*) symcode='[[BCDT]]' ;; cygwin* | mingw* | pw32*) symcode='[[ABCDGISTW]]' ;; hpux*) # Its linker distinguishes data from code symbols if test "$host_cpu" = ia64; then symcode='[[ABCDEGRST]]' fi lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ;; linux* | k*bsd*-gnu) if test "$host_cpu" = ia64; then symcode='[[ABCDGIRSTW]]' lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" fi ;; irix* | nonstopux*) symcode='[[BCDEGRST]]' ;; osf*) symcode='[[BCDEGQRST]]' ;; solaris*) symcode='[[BDRT]]' ;; sco3.2v5*) symcode='[[DT]]' ;; sysv4.2uw2*) symcode='[[DT]]' ;; sysv5* | sco5v6* | unixware* | OpenUNIX*) symcode='[[ABDT]]' ;; sysv4) symcode='[[DFNSTU]]' ;; esac # Handle CRLF in mingw tool chain opt_cr= case $build_os in mingw*) opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ;; esac # If we're using GNU nm, then use its standard symbol codes. case `$NM -V 2>&1` in *GNU* | *'with BFD'*) symcode='[[ABCDGIRSTW]]' ;; esac # Try without a prefix undercore, then with it. for ac_symprfx in "" "_"; do # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. symxfrm="\\1 $ac_symprfx\\2 \\2" # Write the raw and C identifiers. lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" # Check to see that the pipe works correctly. pipe_works=no rm -f conftest* cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then # Try sorting and uniquifying the output. if sort "$nlist" | uniq > "$nlist"T; then mv -f "$nlist"T "$nlist" else rm -f "$nlist"T fi # Make sure that we snagged all the symbols we need. if grep ' nm_test_var$' "$nlist" >/dev/null; then if grep ' nm_test_func$' "$nlist" >/dev/null; then cat < conftest.$ac_ext #ifdef __cplusplus extern "C" { #endif EOF # Now generate the symbol file. eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' cat <> conftest.$ac_ext #if defined (__STDC__) && __STDC__ # define lt_ptr_t void * #else # define lt_ptr_t char * # define const #endif /* The mapping between symbol names and symbols. */ const struct { const char *name; lt_ptr_t address; } lt_preloaded_symbols[[]] = { EOF $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext cat <<\EOF >> conftest.$ac_ext {0, (lt_ptr_t) 0} }; #ifdef __cplusplus } #endif EOF # Now try linking the two files. mv conftest.$ac_objext conftstm.$ac_objext lt_save_LIBS="$LIBS" lt_save_CFLAGS="$CFLAGS" LIBS="conftstm.$ac_objext" CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then pipe_works=yes fi LIBS="$lt_save_LIBS" CFLAGS="$lt_save_CFLAGS" else echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD fi else echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD fi else echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD cat conftest.$ac_ext >&5 fi rm -f conftest* conftst* # Do not use the global_symbol_pipe unless it works. if test "$pipe_works" = yes; then break else lt_cv_sys_global_symbol_pipe= fi done ]) if test -z "$lt_cv_sys_global_symbol_pipe"; then lt_cv_sys_global_symbol_to_cdecl= fi if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then AC_MSG_RESULT(failed) else AC_MSG_RESULT(ok) fi ]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE # AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) # --------------------------------------- AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], [_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)= AC_MSG_CHECKING([for $compiler option to produce PIC]) ifelse([$1],[CXX],[ # C++ specific cases for pic, static, wl, etc. if test "$GXX" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | os2* | pw32*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; *djgpp*) # DJGPP does not support shared libraries at all _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else case $host_os in aix4* | aix5*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; chorus*) case $cc_basename in cxch68*) # Green Hills C++ Compiler # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ;; esac ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; esac ;; dgux*) case $cc_basename in ec++*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; ghcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; freebsd* | dragonfly*) # FreeBSD uses GNU C++ ;; hpux9* | hpux10* | hpux11*) case $cc_basename in CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' fi ;; aCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac ;; *) ;; esac ;; interix*) # This is c89, which is MS Visual C++ (no shared libs) # Anyone wants to do a port? ;; irix5* | irix6* | nonstopux*) case $cc_basename in CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' # CC pic flag -KPIC is the default. ;; *) ;; esac ;; linux* | k*bsd*-gnu) case $cc_basename in KCC*) # KAI C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; icpc* | ecpc*) # Intel C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgCC*) # Portland Group C++ compiler. _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; cxx*) # Compaq C++ # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C++ 5.9 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; esac ;; esac ;; lynxos*) ;; m88k*) ;; mvs*) case $cc_basename in cxx*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' ;; *) ;; esac ;; netbsd*) ;; osf3* | osf4* | osf5*) case $cc_basename in KCC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' ;; RCC*) # Rational C++ 2.4.1 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; cxx*) # Digital/Compaq C++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # Make sure the PIC flag is empty. It appears that all Alpha # Linux and Compaq Tru64 Unix objects are PIC. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) ;; esac ;; psos*) ;; solaris*) case $cc_basename in CC*) # Sun C++ 4.2, 5.x and Centerline C++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' ;; gcx*) # Green Hills C++ Compiler _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' ;; *) ;; esac ;; sunos4*) case $cc_basename in CC*) # Sun C++ 4.x _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; lcc*) # Lucid _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' ;; *) ;; esac ;; tandem*) case $cc_basename in NCC*) # NonStop-UX NCC 3.20 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ;; *) ;; esac ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) case $cc_basename in CC*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; esac ;; vxworks*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ], [ if test "$GCC" = yes; then _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' case $host_os in aix*) # All AIX code is PIC. if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; amigaos*) # FIXME: we need at least 68020 code to build shared libraries, but # adding the `-m68020' flag to GCC prevents building anything better, # like `-m68040'. _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' ;; beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) # PIC is the default for these OSes. ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). # Although the cygwin gcc ignores -fPIC, still need this for old-style # (--disable-auto-import) libraries _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ;; darwin* | rhapsody*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' ;; interix[[3-9]]*) # Interix 3.x gcc -fpic/-fPIC options generate broken code. # Instead, we relocate shared libraries at runtime. ;; msdosdjgpp*) # Just because we use GCC doesn't mean we suddenly get shared libraries # on systems that don't support them. _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no enable_shared=no ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic fi ;; hpux*) # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' ;; esac else # PORTME Check for flag to pass linker flags through the system compiler. case $host_os in aix*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' if test "$host_cpu" = ia64; then # AIX 5 now supports IA64 processor _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' else _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' fi ;; darwin*) # PIC is the default on this platform # Common symbols not allowed in MH_DYLIB files case $cc_basename in xlc*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; esac ;; mingw* | cygwin* | pw32* | os2*) # This hack is so that the source file can tell whether it is being # built for inclusion in a dll (and should export symbols for example). _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' ;; hpux9* | hpux10* | hpux11*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but # not for PA HP-UX. case $host_cpu in hppa*64*|ia64*) # +Z the default ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' ;; esac # Is there a better lt_prog_compiler_static that works with the bundled CC? _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ;; irix5* | irix6* | nonstopux*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # PIC (with -KPIC) is the default. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; newsos6) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; linux* | k*bsd*-gnu) case $cc_basename in icc* | ecc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' ;; pgcc* | pgf77* | pgf90* | pgf95*) # Portland Group compilers (*not* the Pentium gcc compiler, # which looks to be a dead project) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; ccc*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All Alpha code is PIC. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; *) case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ;; *Sun\ F*) # Sun Fortran 8.3 passes all unrecognized flags to the linker _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='' ;; esac ;; esac ;; osf3* | osf4* | osf5*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' # All OSF/1 code is PIC. _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; rdos*) _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' ;; solaris*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' case $cc_basename in f77* | f90* | f95*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; *) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; esac ;; sunos4*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4 | sysv4.2uw2* | sysv4.3*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; sysv4*MP*) if test -d /usr/nec ;then _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' fi ;; sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; unicos*) _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; uts4*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ;; *) _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ;; esac fi ]) AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) # # Check to make sure the PIC flag actually works. # if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])], [], [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in "" | " "*) ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; esac], [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) fi case $host_os in # For platforms which do not support PIC, -DPIC is meaningless: *djgpp*) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= ;; *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" ;; esac # # Check to make sure the static flag actually works. # wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), $lt_tmp_static_flag, [], [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) ]) # AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) # ------------------------------------ # See if the linker supports building shared libraries. AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], [AC_REQUIRE([LT_AC_PROG_SED])dnl AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) ifelse([$1],[CXX],[ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' case $host_os in aix4* | aix5*) # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' else _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' fi ;; pw32*) _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" ;; cygwin* | mingw*) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/;/^.*[[ ]]__nm__/s/^.*[[ ]]__nm__\([[^ ]]*\)[[ ]][[^ ]]*/\1 DATA/;/^I[[ ]]/d;/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' ;; *) _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ;; esac ],[ runpath_var= _LT_AC_TAGVAR(allow_undefined_flag, $1)= _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=no _LT_AC_TAGVAR(archive_cmds, $1)= _LT_AC_TAGVAR(archive_expsym_cmds, $1)= _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_minus_L, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown _LT_AC_TAGVAR(hardcode_automatic, $1)=no _LT_AC_TAGVAR(module_cmds, $1)= _LT_AC_TAGVAR(module_expsym_cmds, $1)= _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' # include_expsyms should be a list of space-separated symbols to be *always* # included in the symbol list _LT_AC_TAGVAR(include_expsyms, $1)= # exclude_expsyms can be an extended regexp of symbols to exclude # it will be wrapped by ` (' and `)$', so one must not match beginning or # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', # as well as any symbol that contains `d'. _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out # platforms (ab)use it in PIC code, but their linkers get confused if # the symbol is explicitly referenced. Since portable code cannot # rely on this symbol name, it's probably fine to never include it in # preloaded symbol tables. extract_expsyms_cmds= # Just being paranoid about ensuring that cc_basename is set. _LT_CC_BASENAME([$compiler]) case $host_os in cygwin* | mingw* | pw32*) # FIXME: the MSVC++ port hasn't been tested in a loooong time # When not using gcc, we currently assume that we are using # Microsoft Visual C++. if test "$GCC" != yes; then with_gnu_ld=no fi ;; interix*) # we just hope/assume this is gcc and not c89 (= MSVC++) with_gnu_ld=yes ;; openbsd*) with_gnu_ld=no ;; esac _LT_AC_TAGVAR(ld_shlibs, $1)=yes if test "$with_gnu_ld" = yes; then # If archive_cmds runs LD, not CC, wlarc should be empty wlarc='${wl}' # Set some defaults for GNU ld with shared library support. These # are reset later if shared libraries are not supported. Putting them # here allows them to be overridden if necessary. runpath_var=LD_RUN_PATH _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' # ancient GNU ld didn't support --whole-archive et. al. if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi supports_anon_versioning=no case `$LD -v 2>/dev/null` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... *\ 2.11.*) ;; # other 2.11 versions *) supports_anon_versioning=yes ;; esac # See if GNU ld supports shared libraries. case $host_os in aix3* | aix4* | aix5*) # On AIX/PPC, the GNU linker is very broken if test "$host_cpu" != ia64; then _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 *** Warning: the GNU linker, at least up to release 2.9.1, is reported *** to be unable to reliably create shared libraries on AIX. *** Therefore, libtool is disabling shared libraries support. If you *** really care for shared libraries, you may want to modify your PATH *** so that a non-GNU linker is found, and then restart. EOF fi ;; amigaos*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Samuel A. Falvo II reports # that the semantics of dynamic libraries on AmigaOS, at least up # to version 4, is to share data among multiple programs linked # with the same dynamic library. Since this doesn't match the # behavior of shared libraries on other platforms, we can't use # them. _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; beos*) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Joseph Beckenbach says some releases of gcc # support --undefined. This deserves some investigation. FIXME _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; cygwin* | mingw* | pw32*) # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, # as there is no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=no _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]][[ ]]/s/.*[[ ]]\([[^ ]]*\)/\1 DATA/'\'' -e '\''/^[[AITW]][[ ]]/s/.*[[ ]]//'\'' | sort | uniq > $export_symbols' if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' # If the export-symbols file already is a .def file (1st line # is EXPORTS), use it as is; otherwise, prepend... _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then cp $export_symbols $output_objdir/$soname.def; else echo EXPORTS > $output_objdir/$soname.def; cat $export_symbols >> $output_objdir/$soname.def; fi~ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; interix[[3-9]]*) _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. # Instead, shared libraries are loaded at an image base (0x10000000 by # default) and relocated if they conflict, which is a slow very memory # consuming and fragmenting process. To avoid this, we pick a random, # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link # time. Moving up from 0x10000000 also allows more sbrk(2) space. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ;; gnu* | linux* | k*bsd*-gnu) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then tmp_addflag= case $cc_basename,$host_cpu in pgcc*) # Portland Group C compiler _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag' ;; pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_addflag=' $pic_flag -Mnomain' ;; ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 tmp_addflag=' -i_dynamic' ;; efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 tmp_addflag=' -i_dynamic -nofor_main' ;; ifc* | ifort*) # Intel Fortran compiler tmp_addflag=' -nofor_main' ;; esac case `$CC -V 2>&1 | sed 5q` in *Sun\ C*) # Sun C 5.9 _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' tmp_sharedflag='-G' ;; *Sun\ F*) # Sun Fortran 8.3 tmp_sharedflag='-G' ;; *) tmp_sharedflag='-shared' ;; esac _LT_AC_TAGVAR(archive_cmds, $1)='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' if test $supports_anon_versioning = yes; then _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ $echo "local: *; };" >> $output_objdir/$libname.ver~ $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' fi else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' wlarc= else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' fi ;; solaris*) if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <&2 *** Warning: The releases 2.8.* of the GNU linker cannot reliably *** create shared libraries on Solaris systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.9.1 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. EOF elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) case `$LD -v 2>&1` in *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) _LT_AC_TAGVAR(ld_shlibs, $1)=no cat <<_LT_EOF 1>&2 *** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not *** reliably create shared libraries on SCO systems. Therefore, libtool *** is disabling shared libraries support. We urge you to upgrade GNU *** binutils to release 2.16.91.0.3 or newer. Another option is to modify *** your PATH or compiler configuration so that the native linker is *** used, and then restart. _LT_EOF ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac ;; sunos4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' wlarc= _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; esac if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then runpath_var= _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= fi else # PORTME fill in a description of your system's linker (not GNU ld) case $host_os in aix3*) _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(always_export_symbols, $1)=yes _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' # Note: this linker hardcodes the directories in LIBPATH if there # are no directories specified by -L. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then # Neither direct hardcoding nor static linking is supported with a # broken collect2. _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported fi ;; aix4* | aix5*) if test "$host_cpu" = ia64; then # On IA64, the linker does run time linking by default, so we don't # have to do anything special. aix_use_runtimelinking=no exp_sym_flag='-Bexport' no_entry_flag="" else # If we're using GNU nm, then we don't want the "-C" option. # -C means demangle to AIX nm, but means don't demangle with GNU nm if $NM -V 2>&1 | grep 'GNU' > /dev/null; then _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' else _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\[$]2 == "T") || (\[$]2 == "D") || (\[$]2 == "B")) && ([substr](\[$]3,1,1) != ".")) { print \[$]3 } }'\'' | sort -u > $export_symbols' fi aix_use_runtimelinking=no # Test if we are trying to use run time linking or normal # AIX style linking. If -brtl is somewhere in LDFLAGS, we # need to do runtime linking. case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) for ld_flag in $LDFLAGS; do if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then aix_use_runtimelinking=yes break fi done ;; esac exp_sym_flag='-bexport' no_entry_flag='-bnoentry' fi # When large executables or shared objects are built, AIX ld can # have problems creating the table of contents. If linking a library # or program results in "error TOC overflow" add -mminimal-toc to # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. _LT_AC_TAGVAR(archive_cmds, $1)='' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes; then case $host_os in aix4.[[012]]|aix4.[[012]].*) # We only want to do this on AIX 4.2 and lower, the check # below for broken collect2 doesn't work under 4.3+ collect2name=`${CC} -print-prog-name=collect2` if test -f "$collect2name" && \ strings "$collect2name" | grep resolve_lib_name >/dev/null then # We have reworked collect2 : else # We have old collect2 _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported # It fails to find uninstalled libraries when the uninstalled # path is not listed in the libpath. Setting hardcode_minus_L # to unsupported forces relinking _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= fi ;; esac shared_flag='-shared' if test "$aix_use_runtimelinking" = yes; then shared_flag="$shared_flag "'${wl}-G' fi else # not using gcc if test "$host_cpu" = ia64; then # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release # chokes on -Wl,-G. The following line is correct: shared_flag='-G' else if test "$aix_use_runtimelinking" = yes; then shared_flag='${wl}-G' else shared_flag='${wl}-bM:SRE' fi fi fi # It seems that -bexpall does not export symbols beginning with # underscore (_), so it is better to generate a list of symbols to export. _LT_AC_TAGVAR(always_export_symbols, $1)=yes if test "$aix_use_runtimelinking" = yes; then # Warning - without using the other runtime loading flags (-brtl), # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" else if test "$host_cpu" = ia64; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" else # Determine the default libpath from the value encoded in an empty executable. _LT_AC_SYS_LIBPATH_AIX _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" # Warning - without using the other run time loading flags, # -berok will link without error, but may produce a broken library. _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' # Exported symbols can be pulled into shared objects from archives _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes # This is similar to how AIX traditionally builds its shared libraries. _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' fi fi ;; amigaos*) _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # see comment about different semantics on the GNU ld section _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; bsdi[[45]]*) _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic ;; cygwin* | mingw* | pw32*) # When not using gcc, we currently assume that we are using # Microsoft Visual C++. # hardcode_libdir_flag_spec is actually meaningless, as there is # no search path for DLLs. _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported # Tell ltmain to make .lib files, not .a files. libext=lib # Tell ltmain to make .dll files, not .so files. shrext_cmds=".dll" # FIXME: Setting linknames here is a bad hack. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' # The linker will automatically build a .lib file if we build a DLL. _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' # FIXME: Should let the user specify the lib program. _LT_AC_TAGVAR(old_archive_cmds, $1)='lib -OUT:$oldlib$oldobjs$old_deplibs' _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes ;; darwin* | rhapsody*) case $host_os in rhapsody* | darwin1.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ;; *) # Darwin 1.3 on if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' else case ${MACOSX_DEPLOYMENT_TARGET} in 10.[[012]]) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; 10.*) _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ;; esac fi ;; esac _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_automatic, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes if test "$GCC" = yes ; then output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' else case $cc_basename in xlc*) output_verbose_link_cmd='echo' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $xlcverstring' _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $xlcverstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ;; dgux*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; freebsd1*) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor # support. Future versions do this automatically, but an explicit c++rt0.o # does not break anything, and helps significantly (at the cost of a little # extra space). freebsd2.2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # Unfortunately, older versions of FreeBSD 2 do not have this feature. freebsd2*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; # FreeBSD 3 and greater uses gcc -shared to do shared libraries. freebsd* | dragonfly*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; hpux9*) if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=yes # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ;; hpux10*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' fi if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes fi ;; hpux11*) if test "$GCC" = yes -a "$with_gnu_ld" = no; then case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac else case $host_cpu in hppa*64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ;; ia64*) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ;; esac fi if test "$with_gnu_ld" = no; then _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: case $host_cpu in hppa*64*|ia64*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' # hardcode_minus_L: Not really in the search PATH, # but as the default location of the library. _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ;; esac fi ;; irix5* | irix6* | nonstopux*) if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='-rpath $libdir' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; netbsd*) if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; newsos6) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; openbsd*) if test -f /usr/libexec/ld.so; then _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' else case $host_os in openbsd[[01]].* | openbsd2.[[0-7]] | openbsd2.[[0-7]].*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' ;; *) _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ;; esac fi else _LT_AC_TAGVAR(ld_shlibs, $1)=no fi ;; os2*) _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ;; osf3*) if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; osf4* | osf5*) # as osf3* with the addition of -msym flag if test "$GCC" = yes; then _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' else _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' # Both c and cxx compiler support -rpath directly _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' fi _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ;; solaris*) _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' if test "$GCC" = yes; then wlarc='${wl}' _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' else wlarc='' _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no case $host_os in solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; *) # The compiler driver will combine and reorder linker options, # but understands `-z linker_flag'. GCC discards it without `$wl', # but is careful enough not to reorder. # Supported since Solaris 2.6 (maybe 2.5.1?) if test "$GCC" = yes; then _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' else _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' fi ;; esac _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ;; sunos4*) if test "x$host_vendor" = xsequent; then # Use $CC to link under sequent, because it throws in some extra .o # files that make .init and .fini sections work. _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' fi _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_direct, $1)=yes _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4) case $host_vendor in sni) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? ;; siemens) ## LD is ld it makes a PLAMLIB ## CC just makes a GrossModule. _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(reload_cmds, $1)='$CC -r -o $output$reload_objs' _LT_AC_TAGVAR(hardcode_direct, $1)=no ;; motorola) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie ;; esac runpath_var='LD_RUN_PATH' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; sysv4.3*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' ;; sysv4*MP*) if test -d /usr/nec; then _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var=LD_RUN_PATH hardcode_runpath_var=yes _LT_AC_TAGVAR(ld_shlibs, $1)=yes fi ;; sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; sysv5* | sco3.2v5* | sco5v6*) # Note: We can NOT use -z defs as we might desire, because we do not # link with -lc, and that would cause any symbols used from libc to # always be unresolved, which means just about no library would # ever link correctly. If we're not using GNU ld we use -z text # though, which does catch some bad symbols but isn't as heavy-handed # as -z defs. _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' _LT_AC_TAGVAR(link_all_deplibs, $1)=yes _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' runpath_var='LD_RUN_PATH' if test "$GCC" = yes; then _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' else _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' fi ;; uts4*) _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ;; *) _LT_AC_TAGVAR(ld_shlibs, $1)=no ;; esac fi ]) AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no # # Do we need to explicitly link libc? # case "x$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)" in x|xyes) # Assume -lc should be added _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes if test "$enable_shared" = yes && test "$GCC" = yes; then case $_LT_AC_TAGVAR(archive_cmds, $1) in *'~'*) # FIXME: we may have to deal with multi-command sequences. ;; '$CC '*) # Test whether the compiler implicitly links with -lc since on some # systems, -lgcc has to come before -lc. If gcc already passes -lc # to ld, don't add -lc before -lgcc. AC_MSG_CHECKING([whether -lc should be explicitly linked in]) $rm conftest* echo "$lt_simple_compile_test_code" > conftest.$ac_ext if AC_TRY_EVAL(ac_compile) 2>conftest.err; then soname=conftest lib=conftest libobjs=conftest.$ac_objext deplibs= wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) compiler_flags=-v linker_flags=-v verstring= output_objdir=. libname=conftest lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) _LT_AC_TAGVAR(allow_undefined_flag, $1)= if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) then _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no else _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes fi _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag else cat conftest.err 1>&5 fi $rm conftest* AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) ;; esac fi ;; esac ])# AC_LIBTOOL_PROG_LD_SHLIBS # _LT_AC_FILE_LTDLL_C # ------------------- # Be careful that the start marker always follows a newline. AC_DEFUN([_LT_AC_FILE_LTDLL_C], [ # /* ltdll.c starts here */ # #define WIN32_LEAN_AND_MEAN # #include # #undef WIN32_LEAN_AND_MEAN # #include # # #ifndef __CYGWIN__ # # ifdef __CYGWIN32__ # # define __CYGWIN__ __CYGWIN32__ # # endif # #endif # # #ifdef __cplusplus # extern "C" { # #endif # BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); # #ifdef __cplusplus # } # #endif # # #ifdef __CYGWIN__ # #include # DECLARE_CYGWIN_DLL( DllMain ); # #endif # HINSTANCE __hDllInstance_base; # # BOOL APIENTRY # DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) # { # __hDllInstance_base = hInst; # return TRUE; # } # /* ltdll.c ends here */ ])# _LT_AC_FILE_LTDLL_C # _LT_AC_TAGVAR(VARNAME, [TAGNAME]) # --------------------------------- AC_DEFUN([_LT_AC_TAGVAR], [ifelse([$2], [], [$1], [$1_$2])]) # old names AC_DEFUN([AM_PROG_LIBTOOL], [AC_PROG_LIBTOOL]) AC_DEFUN([AM_ENABLE_SHARED], [AC_ENABLE_SHARED($@)]) AC_DEFUN([AM_ENABLE_STATIC], [AC_ENABLE_STATIC($@)]) AC_DEFUN([AM_DISABLE_SHARED], [AC_DISABLE_SHARED($@)]) AC_DEFUN([AM_DISABLE_STATIC], [AC_DISABLE_STATIC($@)]) AC_DEFUN([AM_PROG_LD], [AC_PROG_LD]) AC_DEFUN([AM_PROG_NM], [AC_PROG_NM]) # This is just to silence aclocal about the macro not being used ifelse([AC_DISABLE_FAST_INSTALL]) AC_DEFUN([LT_AC_PROG_GCJ], [AC_CHECK_TOOL(GCJ, gcj, no) test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2" AC_SUBST(GCJFLAGS) ]) AC_DEFUN([LT_AC_PROG_RC], [AC_CHECK_TOOL(RC, windres, no) ]) # Cheap backport of AS_EXECUTABLE_P and required macros # from Autoconf 2.59; we should not use $as_executable_p directly. # _AS_TEST_PREPARE # ---------------- m4_ifndef([_AS_TEST_PREPARE], [m4_defun([_AS_TEST_PREPARE], [if test -x / >/dev/null 2>&1; then as_executable_p='test -x' else as_executable_p='test -f' fi ])])# _AS_TEST_PREPARE # AS_EXECUTABLE_P # --------------- # Check whether a file is executable. m4_ifndef([AS_EXECUTABLE_P], [m4_defun([AS_EXECUTABLE_P], [AS_REQUIRE([_AS_TEST_PREPARE])dnl $as_executable_p $1[]dnl ])])# AS_EXECUTABLE_P # NOTE: This macro has been submitted for inclusion into # # GNU Autoconf as AC_PROG_SED. When it is available in # # a released version of Autoconf we should remove this # # macro and use it instead. # # LT_AC_PROG_SED # -------------- # Check for a fully-functional sed program, that truncates # as few characters as possible. Prefer GNU sed if found. AC_DEFUN([LT_AC_PROG_SED], [AC_MSG_CHECKING([for a sed that does not truncate output]) AC_CACHE_VAL(lt_cv_path_SED, [# Loop through the user's path and test for sed and gsed. # Then use that list of sed's as ones to test for truncation. as_save_IFS=$IFS; IFS=$PATH_SEPARATOR for as_dir in $PATH do IFS=$as_save_IFS test -z "$as_dir" && as_dir=. for lt_ac_prog in sed gsed; do for ac_exec_ext in '' $ac_executable_extensions; do if AS_EXECUTABLE_P(["$as_dir/$lt_ac_prog$ac_exec_ext"]); then lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" fi done done done IFS=$as_save_IFS lt_ac_max=0 lt_ac_count=0 # Add /usr/xpg4/bin/sed as it is typically found on Solaris # along with /bin/sed that truncates output. for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do test ! -f $lt_ac_sed && continue cat /dev/null > conftest.in lt_ac_count=0 echo $ECHO_N "0123456789$ECHO_C" >conftest.in # Check for GNU sed and select it if it is found. if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then lt_cv_path_SED=$lt_ac_sed break fi while true; do cat conftest.in conftest.in >conftest.tmp mv conftest.tmp conftest.in cp conftest.in conftest.nl echo >>conftest.nl $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break cmp -s conftest.out conftest.nl || break # 10000 chars as input seems more than enough test $lt_ac_count -gt 10 && break lt_ac_count=`expr $lt_ac_count + 1` if test $lt_ac_count -gt $lt_ac_max; then lt_ac_max=$lt_ac_count lt_cv_path_SED=$lt_ac_sed fi done done ]) SED=$lt_cv_path_SED AC_SUBST([SED]) AC_MSG_RESULT([$SED]) ]) # Copyright (C) 2002, 2003, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_AUTOMAKE_VERSION(VERSION) # ---------------------------- # Automake X.Y traces this macro to ensure aclocal.m4 has been # generated from the m4 files accompanying Automake X.Y. # (This private macro should not be called outside this file.) AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version='1.10' dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to dnl require some minimum version. Point them to the right macro. m4_if([$1], [1.10], [], [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl ]) # _AM_AUTOCONF_VERSION(VERSION) # ----------------------------- # aclocal traces this macro to find the Autoconf version. # This is a private macro too. Using m4_define simplifies # the logic in aclocal, which can simply ignore this definition. m4_define([_AM_AUTOCONF_VERSION], []) # AM_SET_CURRENT_AUTOMAKE_VERSION # ------------------------------- # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. # This function is AC_REQUIREd by AC_INIT_AUTOMAKE. AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], [AM_AUTOMAKE_VERSION([1.10])dnl _AM_AUTOCONF_VERSION(m4_PACKAGE_VERSION)]) # AM_AUX_DIR_EXPAND -*- Autoconf -*- # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets # $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to # `$srcdir', `$srcdir/..', or `$srcdir/../..'. # # Of course, Automake must honor this variable whenever it calls a # tool from the auxiliary directory. The problem is that $srcdir (and # therefore $ac_aux_dir as well) can be either absolute or relative, # depending on how configure is run. This is pretty annoying, since # it makes $ac_aux_dir quite unusable in subdirectories: in the top # source directory, any form will work fine, but in subdirectories a # relative path needs to be adjusted first. # # $ac_aux_dir/missing # fails when called from a subdirectory if $ac_aux_dir is relative # $top_srcdir/$ac_aux_dir/missing # fails if $ac_aux_dir is absolute, # fails when called from a subdirectory in a VPATH build with # a relative $ac_aux_dir # # The reason of the latter failure is that $top_srcdir and $ac_aux_dir # are both prefixed by $srcdir. In an in-source build this is usually # harmless because $srcdir is `.', but things will broke when you # start a VPATH build or use an absolute $srcdir. # # So we could use something similar to $top_srcdir/$ac_aux_dir/missing, # iff we strip the leading $srcdir from $ac_aux_dir. That would be: # am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` # and then we would define $MISSING as # MISSING="\${SHELL} $am_aux_dir/missing" # This will work as long as MISSING is not called from configure, because # unfortunately $(top_srcdir) has no meaning in configure. # However there are other variables, like CC, which are often used in # configure, and could therefore not use this "fixed" $ac_aux_dir. # # Another solution, used here, is to always expand $ac_aux_dir to an # absolute PATH. The drawback is that using absolute paths prevent a # configured tree to be moved without reconfiguration. AC_DEFUN([AM_AUX_DIR_EXPAND], [dnl Rely on autoconf to set up CDPATH properly. AC_PREREQ([2.50])dnl # expand $ac_aux_dir to an absolute path am_aux_dir=`cd $ac_aux_dir && pwd` ]) # AM_CONDITIONAL -*- Autoconf -*- # Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 8 # AM_CONDITIONAL(NAME, SHELL-CONDITION) # ------------------------------------- # Define a conditional. AC_DEFUN([AM_CONDITIONAL], [AC_PREREQ(2.52)dnl ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl AC_SUBST([$1_TRUE])dnl AC_SUBST([$1_FALSE])dnl _AM_SUBST_NOTMAKE([$1_TRUE])dnl _AM_SUBST_NOTMAKE([$1_FALSE])dnl if $2; then $1_TRUE= $1_FALSE='#' else $1_TRUE='#' $1_FALSE= fi AC_CONFIG_COMMANDS_PRE( [if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then AC_MSG_ERROR([[conditional "$1" was never defined. Usually this means the macro was only invoked conditionally.]]) fi])]) # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 9 # There are a few dirty hacks below to avoid letting `AC_PROG_CC' be # written in clear, in which case automake, when reading aclocal.m4, # will think it sees a *use*, and therefore will trigger all it's # C support machinery. Also note that it means that autoscan, seeing # CC etc. in the Makefile, will ask for an AC_PROG_CC use... # _AM_DEPENDENCIES(NAME) # ---------------------- # See how the compiler implements dependency checking. # NAME is "CC", "CXX", "GCJ", or "OBJC". # We try a few techniques and use that to set a single cache variable. # # We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was # modified to invoke _AM_DEPENDENCIES(CC); we would have a circular # dependency, and given that the user is not expected to run this macro, # just rely on AC_PROG_CC. AC_DEFUN([_AM_DEPENDENCIES], [AC_REQUIRE([AM_SET_DEPDIR])dnl AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl AC_REQUIRE([AM_MAKE_INCLUDE])dnl AC_REQUIRE([AM_DEP_TRACK])dnl ifelse([$1], CC, [depcc="$CC" am_compiler_list=], [$1], CXX, [depcc="$CXX" am_compiler_list=], [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], [$1], UPC, [depcc="$UPC" am_compiler_list=], [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], [depcc="$$1" am_compiler_list=]) AC_CACHE_CHECK([dependency style of $depcc], [am_cv_$1_dependencies_compiler_type], [if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then # We make a subdir and do the tests there. Otherwise we can end up # making bogus files that we don't know about and never remove. For # instance it was reported that on HP-UX the gcc test will end up # making a dummy file named `D' -- because `-MD' means `put the output # in D'. mkdir conftest.dir # Copy depcomp to subdir because otherwise we won't find it if we're # using a relative directory. cp "$am_depcomp" conftest.dir cd conftest.dir # We will build objects and dependencies in a subdirectory because # it helps to detect inapplicable dependency modes. For instance # both Tru64's cc and ICC support -MD to output dependencies as a # side effect of compilation, but ICC will put the dependencies in # the current directory while Tru64 will put them in the object # directory. mkdir sub am_cv_$1_dependencies_compiler_type=none if test "$am_compiler_list" = ""; then am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` fi for depmode in $am_compiler_list; do # Setup a source with many dependencies, because some compilers # like to wrap large dependency lists on column 80 (with \), and # we should not choose a depcomp mode which is confused by this. # # We need to recreate these files for each test, as the compiler may # overwrite some of them when testing with obscure command lines. # This happens at least with the AIX C compiler. : > sub/conftest.c for i in 1 2 3 4 5 6; do echo '#include "conftst'$i'.h"' >> sub/conftest.c # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with # Solaris 8's {/usr,}/bin/sh. touch sub/conftst$i.h done echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf case $depmode in nosideeffect) # after this tag, mechanisms are not by side-effect, so they'll # only be used when explicitly requested if test "x$enable_dependency_tracking" = xyes; then continue else break fi ;; none) break ;; esac # We check with `-c' and `-o' for the sake of the "dashmstdout" # mode. It turns out that the SunPro C++ compiler does not properly # handle `-M -o', and we need to detect this. if depmode=$depmode \ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ >/dev/null 2>conftest.err && grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ${MAKE-make} -s -f confmf > /dev/null 2>&1; then # icc doesn't choke on unknown options, it will just issue warnings # or remarks (even with -Werror). So we grep stderr for any message # that says an option was ignored or not supported. # When given -MP, icc 7.0 and 7.1 complain thusly: # icc: Command line warning: ignoring option '-M'; no argument required # The diagnosis changed in icc 8.0: # icc: Command line remark: option '-MP' not supported if (grep 'ignoring option' conftest.err || grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else am_cv_$1_dependencies_compiler_type=$depmode break fi fi done cd .. rm -rf conftest.dir else am_cv_$1_dependencies_compiler_type=none fi ]) AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) AM_CONDITIONAL([am__fastdep$1], [ test "x$enable_dependency_tracking" != xno \ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ]) # AM_SET_DEPDIR # ------------- # Choose a directory name for dependency files. # This macro is AC_REQUIREd in _AM_DEPENDENCIES AC_DEFUN([AM_SET_DEPDIR], [AC_REQUIRE([AM_SET_LEADING_DOT])dnl AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ]) # AM_DEP_TRACK # ------------ AC_DEFUN([AM_DEP_TRACK], [AC_ARG_ENABLE(dependency-tracking, [ --disable-dependency-tracking speeds up one-time build --enable-dependency-tracking do not reject slow dependency extractors]) if test "x$enable_dependency_tracking" != xno; then am_depcomp="$ac_aux_dir/depcomp" AMDEPBACKSLASH='\' fi AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) AC_SUBST([AMDEPBACKSLASH])dnl _AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl ]) # Generate code to set up dependency tracking. -*- Autoconf -*- # Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. #serial 3 # _AM_OUTPUT_DEPENDENCY_COMMANDS # ------------------------------ AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], [for mf in $CONFIG_FILES; do # Strip MF so we end up with the name of the file. mf=`echo "$mf" | sed -e 's/:.*$//'` # Check whether this is an Automake generated Makefile or not. # We used to match only the files named `Makefile.in', but # some people rename them; so instead we look at the file content. # Grep'ing the first line is not enough: some people post-process # each Makefile.in and add a new line on top of each file to say so. # Grep'ing the whole file is not good either: AIX grep has a line # limit of 2048, but all sed's we know have understand at least 4000. if sed 10q "$mf" | grep '^#.*generated by automake' > /dev/null 2>&1; then dirpart=`AS_DIRNAME("$mf")` else continue fi # Extract the definition of DEPDIR, am__include, and am__quote # from the Makefile without running `make'. DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` test -z "$DEPDIR" && continue am__include=`sed -n 's/^am__include = //p' < "$mf"` test -z "am__include" && continue am__quote=`sed -n 's/^am__quote = //p' < "$mf"` # When using ansi2knr, U may be empty or an underscore; expand it U=`sed -n 's/^U = //p' < "$mf"` # Find all dependency output files, they are included files with # $(DEPDIR) in their names. We invoke sed twice because it is the # simplest approach to changing $(DEPDIR) to its actual value in the # expansion. for file in `sed -n " s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do # Make sure the directory exists. test -f "$dirpart/$file" && continue fdir=`AS_DIRNAME(["$file"])` AS_MKDIR_P([$dirpart/$fdir]) # echo "creating $dirpart/$file" echo '# dummy' > "$dirpart/$file" done done ])# _AM_OUTPUT_DEPENDENCY_COMMANDS # AM_OUTPUT_DEPENDENCY_COMMANDS # ----------------------------- # This macro should only be invoked once -- use via AC_REQUIRE. # # This code is only required when automatic dependency tracking # is enabled. FIXME. This creates each `.P' file that we will # need in order to bootstrap the dependency handling code. AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], [AC_CONFIG_COMMANDS([depfiles], [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ]) # Do all the work for Automake. -*- Autoconf -*- # Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, # 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 12 # This macro actually does too much. Some checks are only needed if # your package does certain things. But this isn't really a big deal. # AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) # AM_INIT_AUTOMAKE([OPTIONS]) # ----------------------------------------------- # The call with PACKAGE and VERSION arguments is the old style # call (pre autoconf-2.50), which is being phased out. PACKAGE # and VERSION should now be passed to AC_INIT and removed from # the call to AM_INIT_AUTOMAKE. # We support both call styles for the transition. After # the next Automake release, Autoconf can make the AC_INIT # arguments mandatory, and then we can depend on a new Autoconf # release and drop the old call support. AC_DEFUN([AM_INIT_AUTOMAKE], [AC_PREREQ([2.60])dnl dnl Autoconf wants to disallow AM_ names. We explicitly allow dnl the ones we care about. m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl AC_REQUIRE([AC_PROG_INSTALL])dnl if test "`cd $srcdir && pwd`" != "`pwd`"; then # Use -I$(srcdir) only when $(srcdir) != ., so that make's output # is not polluted with repeated "-I." AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl # test to see if srcdir already configured if test -f $srcdir/config.status; then AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) fi fi # test whether we have cygpath if test -z "$CYGPATH_W"; then if (cygpath --version) >/dev/null 2>/dev/null; then CYGPATH_W='cygpath -w' else CYGPATH_W=echo fi fi AC_SUBST([CYGPATH_W]) # Define the identity of the package. dnl Distinguish between old-style and new-style calls. m4_ifval([$2], [m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl AC_SUBST([PACKAGE], [$1])dnl AC_SUBST([VERSION], [$2])], [_AM_SET_OPTIONS([$1])dnl dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, [m4_fatal([AC_INIT should be called with package and version arguments])])dnl AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl _AM_IF_OPTION([no-define],, [AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl # Some tools Automake needs. AC_REQUIRE([AM_SANITY_CHECK])dnl AC_REQUIRE([AC_ARG_PROGRAM])dnl AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) AM_MISSING_PROG(AUTOCONF, autoconf) AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) AM_MISSING_PROG(AUTOHEADER, autoheader) AM_MISSING_PROG(MAKEINFO, makeinfo) AM_PROG_INSTALL_SH AM_PROG_INSTALL_STRIP AC_REQUIRE([AM_PROG_MKDIR_P])dnl # We need awk for the "check" target. The system "awk" is bad on # some platforms. AC_REQUIRE([AC_PROG_AWK])dnl AC_REQUIRE([AC_PROG_MAKE_SET])dnl AC_REQUIRE([AM_SET_LEADING_DOT])dnl _AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], [_AM_PROG_TAR([v7])])]) _AM_IF_OPTION([no-dependencies],, [AC_PROVIDE_IFELSE([AC_PROG_CC], [_AM_DEPENDENCIES(CC)], [define([AC_PROG_CC], defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl AC_PROVIDE_IFELSE([AC_PROG_CXX], [_AM_DEPENDENCIES(CXX)], [define([AC_PROG_CXX], defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl AC_PROVIDE_IFELSE([AC_PROG_OBJC], [_AM_DEPENDENCIES(OBJC)], [define([AC_PROG_OBJC], defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl ]) ]) # When config.status generates a header, we must update the stamp-h file. # This file resides in the same directory as the config header # that is generated. The stamp files are numbered to have different names. # Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the # loop where config.status creates the headers, so we can generate # our stamp files there. AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], [# Compute $1's index in $config_headers. _am_stamp_count=1 for _am_header in $config_headers :; do case $_am_header in $1 | $1:* ) break ;; * ) _am_stamp_count=`expr $_am_stamp_count + 1` ;; esac done echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_SH # ------------------ # Define $install_sh. AC_DEFUN([AM_PROG_INSTALL_SH], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} AC_SUBST(install_sh)]) # Copyright (C) 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # Check whether the underlying file-system supports filenames # with a leading dot. For instance MS-DOS doesn't. AC_DEFUN([AM_SET_LEADING_DOT], [rm -rf .tst 2>/dev/null mkdir .tst 2>/dev/null if test -d .tst; then am__leading_dot=. else am__leading_dot=_ fi rmdir .tst 2>/dev/null AC_SUBST([am__leading_dot])]) # Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_PROG_LEX # ----------- # Autoconf leaves LEX=: if lex or flex can't be found. Change that to a # "missing" invocation, for better error output. AC_DEFUN([AM_PROG_LEX], [AC_PREREQ(2.50)dnl AC_REQUIRE([AM_MISSING_HAS_RUN])dnl AC_REQUIRE([AC_PROG_LEX])dnl if test "$LEX" = :; then LEX=${am_missing_run}flex fi]) # Check to see how 'make' treats includes. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # AM_MAKE_INCLUDE() # ----------------- # Check to see how make treats includes. AC_DEFUN([AM_MAKE_INCLUDE], [am_make=${MAKE-make} cat > confinc << 'END' am__doit: @echo done .PHONY: am__doit END # If we don't find an include directive, just comment out the code. AC_MSG_CHECKING([for style of include used by $am_make]) am__include="#" am__quote= _am_result=none # First try GNU make style include. echo "include confinc" > confmf # We grep out `Entering directory' and `Leaving directory' # messages which can occur if `w' ends up in MAKEFLAGS. # In particular we don't look at `^make:' because GNU make might # be invoked under some other name (usually "gmake"), in which # case it prints its new name instead of `make'. if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then am__include=include am__quote= _am_result=GNU fi # Now try BSD make style include. if test "$am__include" = "#"; then echo '.include "confinc"' > confmf if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then am__include=.include am__quote="\"" _am_result=BSD fi fi AC_SUBST([am__include]) AC_SUBST([am__quote]) AC_MSG_RESULT([$_am_result]) rm -f confinc confmf ]) # Copyright (C) 1999, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_PROG_CC_C_O # -------------- # Like AC_PROG_CC_C_O, but changed for automake. AC_DEFUN([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC_C_O])dnl AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([compile])dnl # FIXME: we rely on the cache variable name because # there is no other way. set dummy $CC ac_cc=`echo $[2] | sed ['s/[^a-zA-Z0-9_]/_/g;s/^[0-9]/_/']` if eval "test \"`echo '$ac_cv_prog_cc_'${ac_cc}_c_o`\" != yes"; then # Losing compiler, so override with the script. # FIXME: It is wrong to rewrite CC. # But if we don't then we get into trouble of one sort or another. # A longer-term fix would be to have automake use am__CC in this case, # and then we could set am__CC="\$(top_srcdir)/compile \$(CC)" CC="$am_aux_dir/compile $CC" fi dnl Make sure AC_PROG_CC is never called again, or it will override our dnl setting of CC. m4_define([AC_PROG_CC], [m4_fatal([AC_PROG_CC cannot be called after AM_PROG_CC_C_O])]) ]) # Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- # Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 5 # AM_MISSING_PROG(NAME, PROGRAM) # ------------------------------ AC_DEFUN([AM_MISSING_PROG], [AC_REQUIRE([AM_MISSING_HAS_RUN]) $1=${$1-"${am_missing_run}$2"} AC_SUBST($1)]) # AM_MISSING_HAS_RUN # ------------------ # Define MISSING if not defined so far and test if it supports --run. # If it does, set am_missing_run to use it, otherwise, to nothing. AC_DEFUN([AM_MISSING_HAS_RUN], [AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl AC_REQUIRE_AUX_FILE([missing])dnl test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" # Use eval to expand $SHELL if eval "$MISSING --run true"; then am_missing_run="$MISSING --run " else am_missing_run= AC_MSG_WARN([`missing' script is too old or missing]) fi ]) # Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_MKDIR_P # --------------- # Check for `mkdir -p'. AC_DEFUN([AM_PROG_MKDIR_P], [AC_PREREQ([2.60])dnl AC_REQUIRE([AC_PROG_MKDIR_P])dnl dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, dnl while keeping a definition of mkdir_p for backward compatibility. dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of dnl Makefile.ins that do not define MKDIR_P, so we do our own dnl adjustment using top_builddir (which is defined more often than dnl MKDIR_P). AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl case $mkdir_p in [[\\/$]]* | ?:[[\\/]]*) ;; */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; esac ]) # Helper functions for option handling. -*- Autoconf -*- # Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 3 # _AM_MANGLE_OPTION(NAME) # ----------------------- AC_DEFUN([_AM_MANGLE_OPTION], [[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) # _AM_SET_OPTION(NAME) # ------------------------------ # Set option NAME. Presently that only means defining a flag for this option. AC_DEFUN([_AM_SET_OPTION], [m4_define(_AM_MANGLE_OPTION([$1]), 1)]) # _AM_SET_OPTIONS(OPTIONS) # ---------------------------------- # OPTIONS is a space-separated list of Automake options. AC_DEFUN([_AM_SET_OPTIONS], [AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) # _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) # ------------------------------------------- # Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. AC_DEFUN([_AM_IF_OPTION], [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) # pkg.m4 - Macros to locate and utilise pkg-config. -*- Autoconf -*- # # Copyright © 2004 Scott James Remnant . # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, write to the Free Software # Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. # # As a special exception to the GNU General Public License, if you # distribute this file as part of a program that contains a # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. # PKG_PROG_PKG_CONFIG([MIN-VERSION]) # ---------------------------------- AC_DEFUN([PKG_PROG_PKG_CONFIG], [m4_pattern_forbid([^_?PKG_[A-Z_]+$]) m4_pattern_allow([^PKG_CONFIG(_PATH)?$]) AC_ARG_VAR([PKG_CONFIG], [path to pkg-config utility])dnl if test "x$ac_cv_env_PKG_CONFIG_set" != "xset"; then AC_PATH_TOOL([PKG_CONFIG], [pkg-config]) fi if test -n "$PKG_CONFIG"; then _pkg_min_version=m4_default([$1], [0.9.0]) AC_MSG_CHECKING([pkg-config is at least version $_pkg_min_version]) if $PKG_CONFIG --atleast-pkgconfig-version $_pkg_min_version; then AC_MSG_RESULT([yes]) else AC_MSG_RESULT([no]) PKG_CONFIG="" fi fi[]dnl ])# PKG_PROG_PKG_CONFIG # PKG_CHECK_EXISTS(MODULES, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Check to see whether a particular set of modules exists. Similar # to PKG_CHECK_MODULES(), but does not set variables or print errors. # # # Similar to PKG_CHECK_MODULES, make sure that the first instance of # this or PKG_CHECK_MODULES is called, or make sure to call # PKG_CHECK_EXISTS manually # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_EXISTS], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl if test -n "$PKG_CONFIG" && \ AC_RUN_LOG([$PKG_CONFIG --exists --print-errors "$1"]); then m4_ifval([$2], [$2], [:]) m4_ifvaln([$3], [else $3])dnl fi]) # _PKG_CONFIG([VARIABLE], [COMMAND], [MODULES]) # --------------------------------------------- m4_define([_PKG_CONFIG], [if test -n "$PKG_CONFIG"; then if test -n "$$1"; then pkg_cv_[]$1="$$1" else PKG_CHECK_EXISTS([$3], [pkg_cv_[]$1=`$PKG_CONFIG --[]$2 "$3" 2>/dev/null`], [pkg_failed=yes]) fi else pkg_failed=untried fi[]dnl ])# _PKG_CONFIG # _PKG_SHORT_ERRORS_SUPPORTED # ----------------------------- AC_DEFUN([_PKG_SHORT_ERRORS_SUPPORTED], [AC_REQUIRE([PKG_PROG_PKG_CONFIG]) if $PKG_CONFIG --atleast-pkgconfig-version 0.20; then _pkg_short_errors_supported=yes else _pkg_short_errors_supported=no fi[]dnl ])# _PKG_SHORT_ERRORS_SUPPORTED # PKG_CHECK_MODULES(VARIABLE-PREFIX, MODULES, [ACTION-IF-FOUND], # [ACTION-IF-NOT-FOUND]) # # # Note that if there is a possibility the first call to # PKG_CHECK_MODULES might not happen, you should be sure to include an # explicit call to PKG_PROG_PKG_CONFIG in your configure.ac # # # -------------------------------------------------------------- AC_DEFUN([PKG_CHECK_MODULES], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl AC_ARG_VAR([$1][_CFLAGS], [C compiler flags for $1, overriding pkg-config])dnl AC_ARG_VAR([$1][_LIBS], [linker flags for $1, overriding pkg-config])dnl pkg_failed=no AC_MSG_CHECKING([for $1]) _PKG_CONFIG([$1][_CFLAGS], [cflags], [$2]) _PKG_CONFIG([$1][_LIBS], [libs], [$2]) m4_define([_PKG_TEXT], [Alternatively, you may set the environment variables $1[]_CFLAGS and $1[]_LIBS to avoid the need to call pkg-config. See the pkg-config man page for more details.]) if test $pkg_failed = yes; then _PKG_SHORT_ERRORS_SUPPORTED if test $_pkg_short_errors_supported = yes; then $1[]_PKG_ERRORS=`$PKG_CONFIG --short-errors --errors-to-stdout --print-errors "$2"` else $1[]_PKG_ERRORS=`$PKG_CONFIG --errors-to-stdout --print-errors "$2"` fi # Put the nasty error message in config.log where it belongs echo "$$1[]_PKG_ERRORS" >&AS_MESSAGE_LOG_FD ifelse([$4], , [AC_MSG_ERROR(dnl [Package requirements ($2) were not met: $$1_PKG_ERRORS Consider adjusting the PKG_CONFIG_PATH environment variable if you installed software in a non-standard prefix. _PKG_TEXT ])], [AC_MSG_RESULT([no]) $4]) elif test $pkg_failed = untried; then ifelse([$4], , [AC_MSG_FAILURE(dnl [The pkg-config script could not be found or is too old. Make sure it is in your PATH or set the PKG_CONFIG environment variable to the full path to pkg-config. _PKG_TEXT To get pkg-config, see .])], [$4]) else $1[]_CFLAGS=$pkg_cv_[]$1[]_CFLAGS $1[]_LIBS=$pkg_cv_[]$1[]_LIBS AC_MSG_RESULT([yes]) ifelse([$3], , :, [$3]) fi[]dnl ])# PKG_CHECK_MODULES # Check to make sure that the build environment is sane. -*- Autoconf -*- # Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 # Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 4 # AM_SANITY_CHECK # --------------- AC_DEFUN([AM_SANITY_CHECK], [AC_MSG_CHECKING([whether build environment is sane]) # Just in case sleep 1 echo timestamp > conftest.file # Do `set' in a subshell so we don't clobber the current shell's # arguments. Must try -L first in case configure is actually a # symlink; some systems play weird games with the mod time of symlinks # (eg FreeBSD returns the mod time of the symlink's containing # directory). if ( set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` if test "$[*]" = "X"; then # -L didn't work. set X `ls -t $srcdir/configure conftest.file` fi rm -f conftest.file if test "$[*]" != "X $srcdir/configure conftest.file" \ && test "$[*]" != "X conftest.file $srcdir/configure"; then # If neither matched, then we have a broken ls. This can happen # if, for instance, CONFIG_SHELL is bash and it inherits a # broken ls alias from the environment. This has actually # happened. Such a system could not be considered "sane". AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken alias in your environment]) fi test "$[2]" = conftest.file ) then # Ok. : else AC_MSG_ERROR([newly created file is older than distributed files! Check your system clock]) fi AC_MSG_RESULT(yes)]) # Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # AM_PROG_INSTALL_STRIP # --------------------- # One issue with vendor `install' (even GNU) is that you can't # specify the program used to strip binaries. This is especially # annoying in cross-compiling environments, where the build's strip # is unlikely to handle the host's binaries. # Fortunately install-sh will honor a STRIPPROG variable, so we # always use install-sh in `make install-strip', and initialize # STRIPPROG with the value of the STRIP variable (set by the user). AC_DEFUN([AM_PROG_INSTALL_STRIP], [AC_REQUIRE([AM_PROG_INSTALL_SH])dnl # Installed binaries are usually stripped using `strip' when the user # run `make install-strip'. However `strip' might not be the right # tool to use in cross-compilation environments, therefore Automake # will honor the `STRIP' environment variable to overrule this program. dnl Don't test for $cross_compiling = yes, because it might be `maybe'. if test "$cross_compiling" != no; then AC_CHECK_TOOL([STRIP], [strip], :) fi INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" AC_SUBST([INSTALL_STRIP_PROGRAM])]) # Copyright (C) 2006 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # _AM_SUBST_NOTMAKE(VARIABLE) # --------------------------- # Prevent Automake from outputing VARIABLE = @VARIABLE@ in Makefile.in. # This macro is traced by Automake. AC_DEFUN([_AM_SUBST_NOTMAKE]) # Check how to create a tarball. -*- Autoconf -*- # Copyright (C) 2004, 2005 Free Software Foundation, Inc. # # This file is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # serial 2 # _AM_PROG_TAR(FORMAT) # -------------------- # Check how to create a tarball in format FORMAT. # FORMAT should be one of `v7', `ustar', or `pax'. # # Substitute a variable $(am__tar) that is a command # writing to stdout a FORMAT-tarball containing the directory # $tardir. # tardir=directory && $(am__tar) > result.tar # # Substitute a variable $(am__untar) that extract such # a tarball read from stdin. # $(am__untar) < result.tar AC_DEFUN([_AM_PROG_TAR], [# Always define AMTAR for backward compatibility. AM_MISSING_PROG([AMTAR], [tar]) m4_if([$1], [v7], [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], [m4_case([$1], [ustar],, [pax],, [m4_fatal([Unknown tar format])]) AC_MSG_CHECKING([how to create a $1 tar archive]) # Loop over all known methods to create a tar archive until one works. _am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' _am_tools=${am_cv_prog_tar_$1-$_am_tools} # Do not fold the above two line into one, because Tru64 sh and # Solaris sh will not grok spaces in the rhs of `-'. for _am_tool in $_am_tools do case $_am_tool in gnutar) for _am_tar in tar gnutar gtar; do AM_RUN_LOG([$_am_tar --version]) && break done am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' am__untar="$_am_tar -xf -" ;; plaintar) # Must skip GNU tar: if it does not support --format= it doesn't create # ustar tarball either. (tar --version) >/dev/null 2>&1 && continue am__tar='tar chf - "$$tardir"' am__tar_='tar chf - "$tardir"' am__untar='tar xf -' ;; pax) am__tar='pax -L -x $1 -w "$$tardir"' am__tar_='pax -L -x $1 -w "$tardir"' am__untar='pax -r' ;; cpio) am__tar='find "$$tardir" -print | cpio -o -H $1 -L' am__tar_='find "$tardir" -print | cpio -o -H $1 -L' am__untar='cpio -i -H $1 -d' ;; none) am__tar=false am__tar_=false am__untar=false ;; esac # If the value was cached, stop now. We just wanted to have am__tar # and am__untar set. test -n "${am_cv_prog_tar_$1}" && break # tar/untar a dummy directory, and stop if the command works rm -rf conftest.dir mkdir conftest.dir echo GrepMe > conftest.dir/file AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) rm -rf conftest.dir if test -s conftest.tar; then AM_RUN_LOG([$am__untar /dev/null 2>&1 && break fi done rm -rf conftest.dir AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) AC_MSG_RESULT([$am_cv_prog_tar_$1])]) AC_SUBST([am__tar]) AC_SUBST([am__untar]) ]) # _AM_PROG_TAR m4_include([Scripts/m4/cppunit.m4]) m4_include([acinclude.m4])