# Makefile.in generated by automake 1.10 from Makefile.am. # doc/Makefile. Generated from Makefile.in by configure. # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, # 2003, 2004, 2005, 2006 Free Software Foundation, Inc. # This Makefile.in is free software; the Free Software Foundation # gives unlimited permission to copy and/or distribute it, # with or without modifications, as long as this notice is preserved. # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY, to the extent permitted by law; without # even the implied warranty of MERCHANTABILITY or FITNESS FOR A # PARTICULAR PURPOSE. pkgdatadir = $(datadir)/libvorbis pkglibdir = $(libdir)/libvorbis pkgincludedir = $(includedir)/libvorbis am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd install_sh_DATA = $(install_sh) -c -m 644 install_sh_PROGRAM = $(install_sh) -c install_sh_SCRIPT = $(install_sh) -c INSTALL_HEADER = $(INSTALL_DATA) transform = $(program_transform_name) NORMAL_INSTALL = : PRE_INSTALL = : POST_INSTALL = : NORMAL_UNINSTALL = : PRE_UNINSTALL = : POST_UNINSTALL = : build_triplet = x86_64-unknown-linux-gnu host_triplet = x86_64-unknown-linux-gnu target_triplet = x86_64-unknown-linux-gnu subdir = doc DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \ $(top_srcdir)/configure.in am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ $(ACLOCAL_M4) mkinstalldirs = $(install_sh) -d CONFIG_HEADER = $(top_builddir)/config.h CONFIG_CLEAN_FILES = SOURCES = DIST_SOURCES = RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ html-recursive info-recursive install-data-recursive \ install-dvi-recursive install-exec-recursive \ install-html-recursive install-info-recursive \ install-pdf-recursive install-ps-recursive install-recursive \ installcheck-recursive installdirs-recursive pdf-recursive \ ps-recursive uninstall-recursive am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; am__vpath_adj = case $$p in \ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ *) f=$$p;; \ esac; am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; am__installdirs = "$(DESTDIR)$(docdir)" docDATA_INSTALL = $(INSTALL_DATA) DATA = $(doc_DATA) RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ distclean-recursive maintainer-clean-recursive ETAGS = etags CTAGS = ctags DIST_SUBDIRS = $(SUBDIRS) DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ACLOCAL = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run aclocal-1.10 ALLOCA = AMTAR = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run tar AR = ar AUTOCONF = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoconf AUTOHEADER = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run autoheader AUTOMAKE = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run automake-1.10 AWK = mawk CC = gcc CCDEPMODE = depmode=gcc3 CFLAGS = -O20 -ffast-math -D_REENTRANT -fsigned-char -DUSE_MEMORY_H CPP = gcc -E CPPFLAGS = CXX = g++ CXXCPP = g++ -E CXXDEPMODE = depmode=gcc3 CXXFLAGS = -g -O2 CYGPATH_W = echo DEBUG = -g -Wall -W -D_REENTRANT -D__NO_MATH_INLINES -fsigned-char DEFS = -DHAVE_CONFIG_H DEPDIR = .deps ECHO = echo ECHO_C = ECHO_N = -n ECHO_T = EGREP = /bin/grep -E EXEEXT = F77 = FFLAGS = GREP = /bin/grep HAVE_PKG_CONFIG = yes INSTALL = /usr/bin/install -c INSTALL_DATA = ${INSTALL} -m 644 INSTALL_PROGRAM = ${INSTALL} INSTALL_SCRIPT = ${INSTALL} INSTALL_STRIP_PROGRAM = $(install_sh) -c -s LDFLAGS = LIBOBJS = LIBS = LIBTOOL = $(SHELL) $(top_builddir)/libtool LN_S = ln -s LTLIBOBJS = MAINT = MAKEINFO = ${SHELL} /home/giles/projects/ghostscript/libvorbis-1.2.0/missing --run makeinfo MKDIR_P = /bin/mkdir -p OBJEXT = o OGG_CFLAGS = OGG_LIBS = -logg PACKAGE = libvorbis PACKAGE_BUGREPORT = PACKAGE_NAME = PACKAGE_STRING = PACKAGE_TARNAME = PACKAGE_VERSION = PATH_SEPARATOR = : PDFXMLTEX = PKG_CONFIG = /usr/bin/pkg-config PROFILE = -pg -g -O20 -ffast-math -D_REENTRANT -fsigned-char RANLIB = ranlib SET_MAKE = SHELL = /bin/bash STRIP = strip VERSION = 1.2.0 VE_LIB_AGE = 0 VE_LIB_CURRENT = 2 VE_LIB_REVISION = 3 VF_LIB_AGE = 2 VF_LIB_CURRENT = 5 VF_LIB_REVISION = 0 VORBIS_LIBS = -lm V_LIB_AGE = 4 V_LIB_CURRENT = 4 V_LIB_REVISION = 0 XSLTPROC = abs_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0/doc abs_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0/doc abs_top_builddir = /home/giles/projects/ghostscript/libvorbis-1.2.0 abs_top_srcdir = /home/giles/projects/ghostscript/libvorbis-1.2.0 ac_ct_CC = gcc ac_ct_CXX = g++ ac_ct_F77 = am__include = include am__leading_dot = . am__quote = am__tar = ${AMTAR} chof - "$$tardir" am__untar = ${AMTAR} xf - bindir = ${exec_prefix}/bin build = x86_64-unknown-linux-gnu build_alias = build_cpu = x86_64 build_os = linux-gnu build_vendor = unknown builddir = . datadir = ${datarootdir} datarootdir = ${prefix}/share docdir = $(datadir)/doc/$(PACKAGE)-$(VERSION) dvidir = ${docdir} exec_prefix = ${prefix} host = x86_64-unknown-linux-gnu host_alias = host_cpu = x86_64 host_os = linux-gnu host_vendor = unknown htmldir = ${docdir} includedir = ${prefix}/include infodir = ${datarootdir}/info install_sh = $(SHELL) /home/giles/projects/ghostscript/libvorbis-1.2.0/install-sh libdir = ${exec_prefix}/lib libexecdir = ${exec_prefix}/libexec localedir = ${datarootdir}/locale localstatedir = ${prefix}/var mandir = ${datarootdir}/man mkdir_p = /bin/mkdir -p oldincludedir = /usr/include pdfdir = ${docdir} prefix = /usr/local program_transform_name = s,x,x, psdir = ${docdir} pthread_lib = -lpthread sbindir = ${exec_prefix}/sbin sharedstatedir = ${prefix}/com srcdir = . sysconfdir = ${prefix}/etc target = x86_64-unknown-linux-gnu target_alias = target_cpu = x86_64 target_os = linux-gnu target_vendor = unknown top_builddir = .. top_srcdir = .. SUBDIRS = vorbisfile vorbisenc ### all of the static docs, commited to SVN and included as is static_docs = \ draft-ietf-avt-rtp-vorbis-06.xml \ draft-ietf-avt-rtp-vorbis-06.txt \ eightphase.png \ evenlsp.png \ floor1_inverse_dB_table.html \ floorval.png \ fourphase.png \ framing.html \ helper.html \ index.html \ lspmap.png \ oddlsp.png \ oggstream.html \ programming.html \ squarepolar.png \ stereo.html \ stream.png \ v-comment.html \ vorbis-clip.txt \ vorbis-errors.txt \ vorbis-fidelity.html \ vorbis.html \ vorbisword2.png \ wait.png \ white-ogg.png \ white-xifish.png ### FIXME: bits needed by the spec which lives in xml SPEC_PNG = \ components.png \ floor1-1.png \ floor1-2.png \ floor1-3.png \ floor1-4.png \ hufftree.png \ hufftree-under.png \ residue-pack.png \ residue2.png \ white-xifish.png \ window1.png \ window2.png SPEC_PDF = xifish.pdf # FIXME: also needed here # white-xifish.png built_docs = Vorbis_I_spec.html Vorbis_I_spec.pdf doc_DATA = $(static_docs) $(SPEC_PNG) # conditionally make the generated documentation #doc_DATA = $(static_docs) $(SPEC_PNG) $(built_docs) EXTRA_DIST = $(static_docs) $(doc_sources) \ $(SPEC_PNG) $(SPEC_PDF) $(built_docs) doc_sources = xml/Vorbis_I_spec.xml \ xml/01-introduction.xml \ xml/02-bitpacking.xml \ xml/03-codebook.xml \ xml/04-codec.xml \ xml/05-comment.xml \ xml/06-floor0.xml \ xml/07-floor1.xml \ xml/08-residue.xml \ xml/09-helper.xml \ xml/10-tables.xml \ xml/a1-encapsulation_ogg.xml \ xml/a2-encapsulation_rtp.xml \ xml/footer.xml \ xml/spec-common.xsl \ xml/spec-fo.xsl \ xml/spec-html.xsl # these are expensive; only remove if we have to DISTCLEANFILES = $(built_docs) CLEANFILES = Vorbis_I_spec.fo spec.aux spec.log spec.out # rules for temporary build dir for spec BUILDDIR = build # how to copy images to build dir SPEC_PNG_BUILD = $(foreach file, $(SPEC_PNG), $(BUILDDIR)/$(file)) SPEC_PDF_BUILD = $(foreach file, $(SPEC_PDF), $(BUILDDIR)/$(file)) all: all-recursive .SUFFIXES: $(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) @for dep in $?; do \ case '$(am__configure_deps)' in \ *$$dep*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ && exit 0; \ exit 1;; \ esac; \ done; \ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ cd $(top_srcdir) && \ $(AUTOMAKE) --gnu doc/Makefile .PRECIOUS: Makefile Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status @case '$?' in \ *config.status*) \ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ *) \ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ esac; $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(top_srcdir)/configure: $(am__configure_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh $(ACLOCAL_M4): $(am__aclocal_m4_deps) cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh mostlyclean-libtool: -rm -f *.lo clean-libtool: -rm -rf .libs _libs install-docDATA: $(doc_DATA) @$(NORMAL_INSTALL) test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)" @list='$(doc_DATA)'; for p in $$list; do \ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ f=$(am__strip_dir) \ echo " $(docDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(docdir)/$$f'"; \ $(docDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(docdir)/$$f"; \ done uninstall-docDATA: @$(NORMAL_UNINSTALL) @list='$(doc_DATA)'; for p in $$list; do \ f=$(am__strip_dir) \ echo " rm -f '$(DESTDIR)$(docdir)/$$f'"; \ rm -f "$(DESTDIR)$(docdir)/$$f"; \ done # This directory's subdirectories are mostly independent; you can cd # into them and run `make' without going through this Makefile. # To change the values of `make' variables: instead of editing Makefiles, # (1) if the variable is set in `config.status', edit `config.status' # (which will cause the Makefiles to be regenerated when you run `make'); # (2) otherwise, pass the desired values on the `make' command line. $(RECURSIVE_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ target=`echo $@ | sed s/-recursive//`; \ list='$(SUBDIRS)'; for subdir in $$list; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ dot_seen=yes; \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done; \ if test "$$dot_seen" = "no"; then \ $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ fi; test -z "$$fail" $(RECURSIVE_CLEAN_TARGETS): @failcom='exit 1'; \ for f in x $$MAKEFLAGS; do \ case $$f in \ *=* | --[!k]*);; \ *k*) failcom='fail=yes';; \ esac; \ done; \ dot_seen=no; \ case "$@" in \ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ *) list='$(SUBDIRS)' ;; \ esac; \ rev=''; for subdir in $$list; do \ if test "$$subdir" = "."; then :; else \ rev="$$subdir $$rev"; \ fi; \ done; \ rev="$$rev ."; \ target=`echo $@ | sed s/-recursive//`; \ for subdir in $$rev; do \ echo "Making $$target in $$subdir"; \ if test "$$subdir" = "."; then \ local_target="$$target-am"; \ else \ local_target="$$target"; \ fi; \ (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ || eval $$failcom; \ done && test -z "$$fail" tags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ done ctags-recursive: list='$(SUBDIRS)'; for subdir in $$list; do \ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ done ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ mkid -fID $$unique tags: TAGS TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ include_option=--etags-include; \ empty_fix=.; \ else \ include_option=--include; \ empty_fix=; \ fi; \ list='$(SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test ! -f $$subdir/TAGS || \ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ fi; \ done; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ test -n "$$unique" || unique=$$empty_fix; \ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ $$tags $$unique; \ fi ctags: CTAGS CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ $(TAGS_FILES) $(LISP) tags=; \ here=`pwd`; \ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ unique=`for i in $$list; do \ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ done | \ $(AWK) ' { files[$$0] = 1; } \ END { for (i in files) print i; }'`; \ test -z "$(CTAGS_ARGS)$$tags$$unique" \ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ $$tags $$unique GTAGS: here=`$(am__cd) $(top_builddir) && pwd` \ && cd $(top_srcdir) \ && gtags -i $(GTAGS_ARGS) $$here distclean-tags: -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags distdir: $(DISTFILES) @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ list='$(DISTFILES)'; \ dist_files=`for file in $$list; do echo $$file; done | \ sed -e "s|^$$srcdirstrip/||;t" \ -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ case $$dist_files in \ */*) $(MKDIR_P) `echo "$$dist_files" | \ sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ sort -u` ;; \ esac; \ for file in $$dist_files; do \ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ if test -d $$d/$$file; then \ dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ fi; \ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ else \ test -f $(distdir)/$$file \ || cp -p $$d/$$file $(distdir)/$$file \ || exit 1; \ fi; \ done list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ if test "$$subdir" = .; then :; else \ test -d "$(distdir)/$$subdir" \ || $(MKDIR_P) "$(distdir)/$$subdir" \ || exit 1; \ distdir=`$(am__cd) $(distdir) && pwd`; \ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ (cd $$subdir && \ $(MAKE) $(AM_MAKEFLAGS) \ top_distdir="$$top_distdir" \ distdir="$$distdir/$$subdir" \ am__remove_distdir=: \ am__skip_length_check=: \ distdir) \ || exit 1; \ fi; \ done check-am: all-am check: check-recursive all-am: Makefile $(DATA) installdirs: installdirs-recursive installdirs-am: for dir in "$(DESTDIR)$(docdir)"; do \ test -z "$$dir" || $(MKDIR_P) "$$dir"; \ done install: install-recursive install-exec: install-exec-recursive install-data: install-data-recursive uninstall: uninstall-recursive install-am: all-am @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am installcheck: installcheck-recursive install-strip: $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ `test -z '$(STRIP)' || \ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install mostlyclean-generic: clean-generic: -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES) distclean-generic: -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) maintainer-clean-generic: @echo "This command is intended for maintainers to use" @echo "it deletes files that may require special tools to rebuild." clean: clean-recursive clean-am: clean-generic clean-libtool clean-local mostlyclean-am distclean: distclean-recursive -rm -f Makefile distclean-am: clean-am distclean-generic distclean-tags dvi: dvi-recursive dvi-am: html: html-recursive info: info-recursive info-am: install-data-am: install-docDATA install-dvi: install-dvi-recursive install-exec-am: install-html: install-html-recursive install-info: install-info-recursive install-man: install-pdf: install-pdf-recursive install-ps: install-ps-recursive installcheck-am: maintainer-clean: maintainer-clean-recursive -rm -f Makefile maintainer-clean-am: distclean-am maintainer-clean-generic mostlyclean: mostlyclean-recursive mostlyclean-am: mostlyclean-generic mostlyclean-libtool pdf: pdf-recursive pdf-am: ps: ps-recursive ps-am: uninstall-am: uninstall-docDATA .MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ install-strip .PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ all all-am check check-am clean clean-generic clean-libtool \ clean-local ctags ctags-recursive distclean distclean-generic \ distclean-libtool distclean-tags distdir dvi dvi-am html \ html-am info info-am install install-am install-data \ install-data-am install-docDATA install-dvi install-dvi-am \ install-exec install-exec-am install-html install-html-am \ install-info install-info-am install-man install-pdf \ install-pdf-am install-ps install-ps-am install-strip \ installcheck installcheck-am installdirs installdirs-am \ maintainer-clean maintainer-clean-generic mostlyclean \ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ tags tags-recursive uninstall uninstall-am uninstall-docDATA $(BUILDDIR)/%: $(srcdir)/% @echo "Copying $< to $@" @mkdir -p $(BUILDDIR) @cp $< $@ # how to copy the xml to build dir; cheat by only targeting the main one $(BUILDDIR)/Vorbis_I_spec.xml: $(doc_sources) @mkdir -p $(BUILDDIR) @for file in $(doc_sources); do cp $(srcdir)/$$file $(BUILDDIR); done # translate the draft rtp.txt to .xml in the BUILDDIR $(BUILDDIR)/draft-rtp.xml: draft-ietf-avt-rtp-vorbis-05.txt cat $< | sed 's/ //g' > $@ # cat $< | sed 's/ //g' | sed 's//\>/g' > $@ # explicit rules for generating docs #Vorbis_I_spec.html: $(SPEC_PNG_BUILD) $(BUILDDIR)/Vorbis_I_spec.xml # cd build; xsltproc --xinclude --output Vorbis_I_spec.html spec-html.xsl Vorbis_I_spec.xml && mv $@ .. #Vorbis_I_spec.fo: $(BUILDDIR)/Vorbis_I_spec.xml # cd build; xsltproc --xinclude --output $@ spec-fo.xsl Vorbis_I_spec.xml && mv $@ .. # we add the two newlines to pdfxmltex because this entire XML # toolchain is built from wishful thinking and bonghits and the # default supplied passivetex config files are buggy. #Vorbis_I_spec.pdf: Vorbis_I_spec.fo $(SPEC_PNG_BUILD) $(SPEC_PDF_BUILD) # cp $< build/spec.fo # work around a passivetex bug # -cd build; echo -e -n "\n\n" | pdfxmltex spec.fo # -cd build; echo -e -n "\n\n" | pdfxmltex spec.fo # rm build/spec.fo # mv build/spec.pdf $@ Vorbis_I_spec.html: NO_DOCS_ERROR Vorbis_I_spec.pdf: NO_DOCS_ERROR NO_DOCS_ERROR: @echo @echo "*** Documentation has not been built! ***" @echo "Try re-running after passing --enable-docs to configure." @echo # clean up build dir clean-local: -$(RM) -r $(BUILDDIR) # Tell versions [3.59,3.63) of GNU make to not export all variables. # Otherwise a system limit (for SysV at least) may be exceeded. .NOEXPORT: